Ryobi R10632- Manual

Ryobi R10632

Ryobi R10632– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
Page: / 20

Table of Contents:

  • Page 2 – TABLE OF CONTENTS
  • Page 3 – READ ALL INSTRUCTIONS; RULES FOR SAFE OPERATION
  • Page 5 – Blades coast after turn off.
  • Page 6 – SYMBOL; SAVE THESE INSTRUCTIONS
  • Page 7 – KNOW YOUR CORDLESS CIRCULAR SAW; APPLICATIONS; FEATURES
  • Page 8 – CHARGING BATTERY PACK; Do not; OPERATION
  • Page 9 – TO REMOVE BATTERY PACK; TO INSTALL BATTERY PACK
  • Page 10 – NOTE: Blade can be removed at this point.; SAW BLADES
  • Page 11 – KICKBACK; RIGHT
  • Page 12 – DEPTH OF CUT ADJUSTMENT; STARTING A CUT; Know the right way to use your saw.
  • Page 13 – TO HELP MAINTAIN CONTROL:; Hold your saw firmly with both hands.
  • Page 14 – TO CROSS CUT OR RIP CUT; WIDTH OF CUT SCALE
  • Page 15 – TO BEVEL CUT; Always; TO ADJUST BEVEL SETTING
  • Page 16 – Always let the blade reach full speed then
  • Page 18 – BATTERIES; DO NOT; R E; MAINTENANCE
  • Page 19 – NOTES
  • Page 20 – MODEL NUMBER
Loading the manual

THANK YOU FOR BUYING A RYOBI CORDLESS CIRCULAR SAW.

Your new cordless circular saw has been engineered and manufactured to Ryobi’s high standard for dependability, ease of
operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.

CAUTION: Carefully read through this entire operator’s manual before using your new cordless circular saw.

Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your cordless circular saw properly
and only for what it is intended, you will enjoy years of safe, reliable service.

Thank you again for buying Ryobi tools.

OPERATOR'S MANUAL
5-1/2 in. (140 mm) CORDLESS
CIRCULAR SAW MODEL NO. R10632

SAVE THIS MANUAL FOR FUTURE REFERENCE

SPECIFICATIONS:

Blade Diameter

5-1/2 in. (140 mm)

Blade Arbor

3/8 in. (10 mm)

Cutting Depth at 0

°

1-9/16 in. (40 mm)

Cutting Depth at 45

°

1-1/8 in. (29 mm)

No Load Speed

4,200 RPM

Motor

18 Volt DC

Charge Rate

1 Hour

Charger Rating

120 Volts, 60 Hz, AC

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Manuals for Ryobi R10632

Summary

Page 2 - TABLE OF CONTENTS

Page 2 Look for this symbol to point out important safety precautions. It means attention!!!Your safety is involved. The following recommended accessories are current and were available at the time this manual was printed. ■ 5-1/2 in. (140 mm) Thin Kerf Blade ■ Table of Contents .......................

Page 3 - READ ALL INSTRUCTIONS; RULES FOR SAFE OPERATION

Page 3 WARNING: Do not attempt to operate this tool until you have readthoroughly and understand completely all instructions,safety rules, etc. contained in this manual. Failure tocomply can result in accidents involving fire, electricshock, or serious personal injury. Save operator's manualand revi...

Page 5 - Blades coast after turn off.

Page 5 RULES FOR SAFE OPERATION (Continued) I M P O R T A N T S A F E T Y I N S T R U C T I O N S F O RCIRCULAR SAWS ■ KEEP GUARDS IN PLACE AND IN WORKINGORDER. Never wedge or tie lower blade guard open. Check operation of lower blade guard before each use.Do not use if lower blade guard does not cl...

Other Ryobi Models