Ryobi P520- User Manual

6 SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-tion of these symbols will allow you to operate the tool better and safer. Read The Operator’s Manual Safety Alert No Hands Symbol No Hands Symbol No Hands Symbol No Hands S...

7 SYMBOLS SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTER for repair. When servic- ing, use only identical replacement parts. WARNING: SAVE TH...

8 PRODUCT SPECIFICATIONS Length of Stroke ............................................................................................................................................................... 1 in.Strokes Per Minute .............................................................................

9 FEATURES KNOW YOUR CORDLESS JIG SAW See Figure 1. Before attempting to use this product, familiarize yourself with all operating features and safety rules. TOOLLESS BLADE CLAMP Your saw has a blade clamp design that does not require the use of a tool (blade wrench) when installing or removing the ...

10 UNPACKING This product requires assembly. n Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. n Inspect the tool carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material...

11 OPERATION you should charge it until the green LED on the front of the charger comes on. NOTE: Batteries will not reach full charge the first time they are charged. Allow several cycles (operation followed by recharging) for them to become fully charged. CHARGING A COOL BATTERY PACK If battery pa...

12 Fig. 4 P110 CHARGER YELLOW LED RED LED Fig. 5 P110 CHARGER BATTERY PACK GREEN LED CHARGING A HOT BATTERY PACK When using the tool continuously, the batteries in the battery pack will become hot. You should let a hot battery pack cool down for approximately 30 minutes before attempting to recharge...

13 OPERATION STARTING / STOPPING THE SAW To turn the saw ON , depress the lock-off button and pull the switch trigger. Release the switch trigger to turn your saw OFF . GENERAL CUTTING See Figure 7. Rest the front of the saw base on the workpiece and align cutting edge of the blade with the line on ...

14 0 15 30 45 15 30 OPERATION Fig. 9 Fig. 11 BASE ANGLE CUTTING (BEVEL CUTTING) See Figures 9 - 10. Bevel cutting angles may be adjusted from 0° to 45° right or left. Angles for cuts from 0° to 45° in 15° increments are marked on a scale on both the left and right side of the base. Notches on the re...

15 OPERATION Fig. 9 Fig. 10 BASE EDGE GUIDE SCREW SCALE BASE BASE PIVOT SCREW SPLINTER-FREE CUTTING See Figure 12. The base of the jig saw has a narrow slot to permit splinter-free cutting. It is especially useful when cutting plywood. This feature should only be used when making straight cuts or ci...

16 MAINTENANCE WARNING: When servicing, use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, als...

RYOBI TECHNOLOGIES, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 Post Office Box 1207, Anderson, SC 29622-1207 Phone 1-800-525-2579 www.ryobitools.com 983000-544 6-05 • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your neares...