Ryobi D41- Manual

6 7 SYMBOLS SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to the nearest AUTHORIZED SERVICE CENTER for repair. When servic- ing, use only identical replacement parts. WARNING: To avo...

6 7 EXTENSION CORDS When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the tool will draw. An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power. Use the chart...

8 9 FEATURES Fig. 1 PRODUCT SPECIFICATIONS Chuck Capacity ....................................... 1/16 in. to 3/8 in. Switch ............................. VSR ( Variable Speed Reversible) No Load Speed ..............................................0-1,600/min.Input ............................... 12...

8 9 WARNING: If any parts are damaged or missing do not operate this tool until the damaged or missing parts are replaced. Failure to do so could result in possible serious personal injury. WARNING: Do not attempt to modify this tool or create accesso-ries not recommended for use with this tool. Any...

10 11 INSTALLING BITS See Figure 3 - 4. n Unplug the drill. n Open or close the chuck jaws to a point where the open- ing is slightly larger than the bit size you intend to use. Also, raise the front of the drill slightly to keep the bit from falling out of the chuck jaws. n Insert the drill bit. WA...

10 11 UNLOCK (RELEASE) DRILL B IT CHUCK JAWS CHUCK BODY LOCK (TIGHTEN) Fig. 3 RIGHT CHUCK COLLAR OPERATION Fig. 4 WRONG REMOVING BITS See Figure 3. n Unplug the drill. n Rotate the chuck sleeve clockwise to open the chuck jaws. NOTE: Rotate the chuck body in the direction of the ar- row marked UNLOC...

12 13 OPERATION LEVEL Fig. 6 LEVEL Fig. 7 DRILLING See Figure 6 - 7. Levels are located on the top and end of the motor housing to help keep the drill bit level during use. n Depress and release the switch trigger to be sure the drill is in the OFF position before connecting it to a power supply. n ...

12 13 WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear a dust m...

14 15 MAINTENANCE CHUCK REMOVAL See Figures 8 - 9. The chuck may be removed and replaced with a new one. n Unplug the drill. n Insert a 5/16 in. or larger hex key into the chuck of the drill and tighten the chuck jaws securely. n Tap sharply with a mallet in a counterclockwise direction. This will l...

16 983000-80911-15-05 (REV:02) RYOBI TECHNOLOGIES, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 Post Office Box 1207, Anderson, SC 29622-1207 Phone 1-800-525-2579 www.ryobitools.com • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply cont...