Ryobi AG402- User Manual

Page 3 - GENERAL SAFETY RULES; SAVE THESE INSTRUCTIONS

3 GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS WORK AREA  Keep your work area clean and well lit. Cluttered benches and dark areas invit...

Page 4 - SERVICE

4 SERVICE  Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury.  When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use o...

Page 5 - SYMBOLS; SYMBOL

5 SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes T...

Page 7 - EXTENSION CORDS; ELECTRICAL; DOUBLE INSULATION; ELECTRICAL CONNECTION

7 EXTENSION CORDS When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the tool will draw. An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power. Use the chart t...

Page 8 - FEATURES; PRODUCT SPECIFICATIONS

8 FEATURES Fig. 1 PRODUCT SPECIFICATIONS Wheel Size ............................................................. 4 1/2 in.Cord Length ............................................................... 10 ft.Arbor Size ................................................ 5/8 in. x 11 UNC No Load Speed .......

Page 9 - ASSEMBLY; UNPACKING

9 ASSEMBLY Fig. 2 UNPACKING This product requires assembly.  Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.  Inspect the tool carefully to make sure no breakage or damage occurred during shipping.  Do not discard the p...

Page 10 - APPLICATIONS; CAUTION; WARNING; OPERATION

10 Fig. 3 SLIDE SWITCH WARNING: Do not allow familiarity with tools to make you care-less. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating power tools. Failure to do so could...

Page 11 - GRINDING AND SANDING

11 OPERATION FLANGE NUT GRINDING WHEEL DISC FLANGE SPINDLE SPINDLE LOCK BUTTON FLAT(S) WRENCH TO TIGHTEN TO LOOSEN Fig. 4 GRINDING AND SANDING See Figures 4 - 5.  Always carefully select and use grinding wheels that are recommended for the material to be ground.  Make sure that the minimum operati...

Page 12 - ADJUSTMENTS; GUARD ADJUSTMENT

12 INCORRECT LOCATION OF GUARD Fig. 7 Fig. 8 B Fig. 6 CORRECT LOCATION OF GUARD IS BETWEEN POINTS A AND B A ADJUSTMENTS GUARD ADJUSTMENT See Figure 6 - 8. Never use the angle grinder without the guard in place and properly adjusted.  Unplug the angle grinder.  Using the wrench provided, loosen and...

Page 13 - MAINTENANCE; GENERAL MAINTENANCE

13 To replace the guard:  Unplug the angle grinder.  Depress spindle lock button and rotate flange nut with provided wrench until spindle locks.  Using the wrench provided, loosen and remove nut, grinding or accessory wheel, and disc flange from spindle if necessary. NOTE: To preve nt damage to t...

Page 14 - • SERVICE; The model number of this tool will be found on a plate attached to; • HOW TO ORDER REPAIR PARTS; • MODEL NUMBER; OPERATOR’S MANUAL

14 ONE WORLD TECHNOLOGIES, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 Phone 1-800-525-2579 www.ryobitools.com • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Authorized Service Center. Be sure to provide all per...

Table of Contents:

Other Manuals for Ryobi AG402

Summary

Other Ryobi Models