Ryobi 4070177- User Manual
Ryobi 4070177– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TOUPILLAGE AVEC BAGUES DE GUIDEAGE; Voir les figures 1 et 2.; Débranchez votre toupie.; PIÉCE
- Page 3 – RANURADO CON BUJE DE GUIA
- Page 4 – ROUTER TEMPLATE GUIDE BUSHING KIT - 4070177; Special Instructions for use with router model; See Additional information on the previous; Instructions spéciales pour l’emploi avec les; Voir l’information à la page précédente.; JUEGO DE BUJE DE GUIA DE PLANTILLA DE TUPI; Instrucciones especiales para uso con los
ITEM NO. 4070177
ROUTER TEMPLATE
GUIDE BUSHING KIT
For Use On Ryobi Routers R160, R165, R175,
R180, R181D, R181FB, R181PF, R1801M,
RE170, RE175, RE1802M, RE185 and RE600.
Sizes:
5/16 in., 7/16 in. (Short), 7/16 in. (Long),
1/2 in., and 5/8 in.
ROUTING WITH GUIDE BUSHING
You can accurately duplicate curves and complex
shapes by fitting your router with a template guide
bushing that extends below the subbase. The
router bit passes through the guide bushing. The
guide bushing then rides against a template.
TO INSTALL TEMPLATE GUIDE
BUSHING.
See Figures 1 and 2.
•
Unplug your router.
WARNING:
Failure to unplug your router
could result in accidental starting causing
serious injury.
• Place router upside down on workbench.
• Place template guide bushing in recessed
portion of router base as shown in figure 1.
• Align the cutouts in guide bushing with threaded
holes in base.
• Secure guide bushing to router base with
screws provided.
• Tighten screws securely.
WARNING
:
Failure to tighten screws could
cause bit to come in contact with bushing
resulting in serious injury.
Secure template to the workpiece. Set router to
desired depth of cut and turn it on. Place router
base on the template with the collar of the guide
bushing against the edge of the template. Lower
cutter into the workpiece and proceed around
template, keeping guide bushing pressed against
template edge. When routing with template
guide bushings it is necessary to allow for size
differences between the cutting edge of the cutter
and the face of the guide bushing collar. When
making templates, always allow for this size
difference.
See Figure 2.
TEMPLATE
GUIDE
WORKPIECE
ALIGN
CUTOUTS
WITH
HOLES IN
BASE
Fig. 2
ROUTER BASE
TEMPLATE GUIDE
BUSHING COLLAR
ROUTER BIT
SUBBASE
SIZE DIFFERENCE
ROUTER BIT
COLLAR
SCREW
SUBBASE
RECESS IN
BASE
SCREW
TEMPLATE GUIDE
BUSHING
HOLES
IN BASE
Fig. 1
RYOBI AMERICA CORP.
1428 Pearman Dairy Rd Anderson, SC 29625
Post Office Box 1207 Anderson, SC 29622
Telephone 1-800-525-2579
RYOBI CANADA INC.
P.O. Box 910
Cambridge, Ontario N1R 6K2
Telephone 1-800-265-6778
®
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
ARTICULE Nº 4070177 NÉCESSAIRE DE BAGUES DE GUIDAGE DE GABARIT DE TOUPIE S’utilise sur les toupies Ryobi modéles R160, R165, R175, R180, R181D, R181FB, R181PF, R1801M, RE170, RE175, RE1802M, RE185 y RE600. Formats: 5/16 po, 7/16 po (court), 7/16 po (long), 1/2 po, 5/8 po TOUPILLAGE AVEC BAGUES DE GU...
972000-500 8-03 ARTICULO Nº 4070177 JUEGO DE BUJE DE GUIA DE PLANTILLA DE TUPI Para usar en los Modelos Ryobi R160, R165, R175, R180, R181D, R181FB, R181PF, R1801M, RE170, RE175, RE1802M, RE185 y RE600. Tamaños: 5/16 pulg., 7/16 pulg. (Corto), 7/16 pulg. (Largo), 1/2 pulg. y 5/8 pulg. RANURADO CON B...
ROUTER TEMPLATE GUIDE BUSHING KIT - 4070177 Special Instructions for use with router model Nos. R160, R165, RE170, R180, R181D, R181FB, R 1 8 1 P F, R 1 8 0 1 M , R E 1 8 0 2 M a n d R E 1 8 5 . • Unplug your router. WARNING: Failure to unplug your router could result in accidental starting causing ...
