Page 3 - IMPORTANT SAFETY INSTRUCTIONS; READ ALL INSTRUCTIONS BEFORE USING
3 IMPORTANT SAFETY INSTRUCTIONS WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or carbon monoxide poisoning which will cause death or serious personal injury. READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT n KNOW...
Page 4 - SPECIFIC SAFETY RULES
4 SPECIFIC SAFETY RULES n NEVER DIRECT A WATER STREAM TOWARDS P E O P L E O R P E T S , O R A N Y E L E C T R I C A L DEVICE. n BEFORE STARTING ANY CLEANING OPERATION, close doors and windows. Clear the area to be cleaned of debris, toys, outdoor furniture, or other objects that could create a hazar...
Page 5 - SYMBOLS
5 SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-tion of these symbols will allow you to operate the tool better and safer. Read The Operator’s Manual Safety Alert SYMBOL NAME DESIGNATION/EXPLANATION Do not expose to rain ...
Page 6 - SERVICE; SAVE THESE INSTRUCTIONS
6 SYMBOLS SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTER for repair. When servic-ing, use only identical replacement parts. WARNING: SAVE THE...
Page 7 - FEATURES; PRODUCT SPECIFICATIONS
7 FEATURES Fig. 1 PRODUCT SPECIFICATIONS Engine Size................................................................................................................................................................... 211 ccEngine Output, Horsepower........................................................
Page 8 - KNOW YOUR PRESSURE WASHER; SUBARU
8 FEATURES KNOW YOUR PRESSURE WASHER See Figure 1. Before attempting to use this product, familiarize yourself with all ope rating features and safety rules. ACCESSORIES STORAGE Safely stores accessories (not included) within easy reach. DETERGENT BUCKET The removable detergent bucket holds up to tw...
Page 9 - ASSEMBLY; UNPACKING
9 ASSEMBLY UNPACKING This product requires assembly. n Carefully cut the box down the sides then remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. NOTE: This tool is heavy. To avoid back injury, lift with your legs, not your back, and...
Page 10 - ATTACHING THE RESTING FOOT; ATTACHING INJECTION HOSE
10 ASSEMBLY ATTACHING THE RESTING FOOT See Figure 3. To attach the resting foot to the pressure washer: n Lift the mach ine sligh tly. Slide the resting foot into the bottom of the spray wand storage tube. n Push the resting foot into the storage tube until the base of the machine rests in the groov...
Page 11 - ADDING OIL TO THE ENGINE
11 ASSEMBLY ADDING OIL TO THE ENGINE See Figure 7. NOTE: This machine has been shipped with approximately 2 oz. of oil in the enginge from testing. You must add oil to the engine before starting it the first time. CAUTION: Any attempt to start the engine without adding oil will result in engine fail...
Page 12 - OPERATION
12 ASSEMBLY CONNECTING THE HIGH PRESSURE HOSE TO THE PUMP See Figure 9. ������After the high pressure hose has been uncoiled and attached to the spray wand: n Pull back and hold the spring loaded collar on the pump. n Insert the nozzle on the end of the high pressure hose into the collar. n Release ...
Page 13 - APPLICATIONS
13 OPERATION APPLICATIONS This product has been designed for the purposes listed below: n �Removing dirt and mold from decks, cement patios, and house siding n �Cleaning cars, boats, motorcycles, and grills S TA RT I N G / S T O P P I N G T H E P R E S S U R E WASHER See Figures 11 - 13. CAUTION: Do...
Page 14 - USING THE SPRAY WAND TRIGGER
14 OPERATION Fig. 14 To stop the engine using the fuel valve: n Close the fuel valve and wait for the engine to stop. NOTE: Avoid letting fuel remain in the carburetor for long periods as this can clog carburetor passages with impuri-ties resulting in malfunctions. SELECTING THE RIGHT QUICK-CONNECT ...
Page 15 - MOVING THE PRESSURE WASHER; RINSING WITH THE PRESSURE WASHER
15 OPERATION Fig. 17 MOVING THE PRESSURE WASHER See Figure 17. n Loosen the pivot knob located halfway down the spray wand storage pipe. n Grasp the handle at the rear of the pressure washer. Turn the top section of the pressure washer until it is fully ex- tended as shown in figure 17. Retighten th...
Page 16 - MAINTENANCE; GENERAL MAINTENANCE; CLEANING THE AIR FILTER
16 MAINTENANCE WARNING: When servicing, use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, als...
Page 18 - STORING THE PRESSURE WASHER
18 MAINTENANCE STORING THE PRESSURE WASHER It is important to store this product in a frost-free area. Always empty water from all hoses, the pump, the fuel tank, and the detergent bucket before storing. NOTE: Use of a fuel stabilizer and pump saver will give you better performance and increase the ...
Page 19 - TROUBLESHOOTING; PROBLEM CAUSE SOLUTION
19 TROUBLESHOOTING PROBLEM CAUSE SOLUTION Engine fails to start 1. Engine switch is in the off position 1. Move switch to start. 2. No fuel in tank 2. Fill tank. 3. Spark plug shorted or fouled 3. Replace spark plug. 4. Spark plug is broken (cracked 4. Replace spark plug. porcelain or electrodes bro...
Page 20 - NOTES
Page 21 - WARRANTY; FEDERAL EMISSIONS COMPONENT DEFECT WARRANTY
21 WARRANTY EMISSION COMPONENT DEFECT WARRANTY PERIODThe warranty period for this engine begins on the date of sale to the initial purchaser and continues for a period of 2 years. PARTS COVERED Listed below are the parts covered by the Emission Components Defect Warranty. Some of the parts listed be...
Page 22 - CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT
22 WARRANTY A. COMMENCEMENT DATE The warranty period begins on the date the engine is delivered to a first retail purchaser. B. LENGTH OF COVERAGE FUJI warrants to a first retail purchaser and each subsequent purchaser that the engine is free from defects in materials and workmanship that cause the ...
Page 24 - ENGINE WARRANTY
24 LIMITED ROBIN/SUBARU ® ENGINE WARRANTY (Effective with engines purchased from Robin America, Wood Dale, IL, after November 15, 1993)Robin America, Inc., a division of Fuji Heavy Industries, Ltd. (herein “Robin”), warrants that each new engine sold by it will be free, under normal use and service,...
Page 25 - LIMITED NON-ENGINE WARRANTY STATEMENT
25 WARRANTY LIMITED NON-ENGINE WARRANTY STATEMENT Ryobi Technologies, Inc. warrants to the original retail purchaser that this Ryobi Technologies, Inc. product is free from defect in material and workmanship and agrees to repair or replace, at Ryobi Technologies, Inc.’s discretion, any defective pro...
Page 26 - • MODEL NUMBER; OPERATOR’S MANUAL; GASOLINE PRESSURE WASHER
RYOBI TECHNOLOGIES, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 Post Office Box 1207, Anderson, SC 29622-1207 Phone 1-800-860-4050 www.ryobipressurewashers.com 983000-617 2-05 • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact y...
