Page 2 - IMPORTANT SAFEGUARDS
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTREMOVE COVER. NO USER - SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, wit...
Page 3 - TABLE OF CONTENTS; Product Introduction
TABLE OF CONTENTS Product Introduction ..........................................................................................................4-5 Component Guide ST2-XM2 Front Panel ...........................................................................................................6ST2-XM2...
Page 4 - INTRODUCTION; DESCRIPTION
4 INTRODUCTION DESCRIPTION Thank you for choosing the Russound ST2-XM2Dual Smart Tuner. Whether you are adding satel-lite radio to an existing system, expanding a CAiSeries system or taking advantage of theCAV6.6’s robust RNET ® communication link, the ST2-XM2 Tuner is designed to meet your needs. T...
Page 5 - Optional ST2-KP keypads can be used to; RS-232 Controlled System
5 INTRODUCTION Before using the ST2-XM2 tuner with theCAV6.6 or CAM6.6, you must assign sourcenumbers to Tuner 1 and 2 in the ST2 SetupMenu AND complete the CAV6.6 andCAM6.6’s Source Setup procedure to identi-fy the tuner as a “Peripheral“ device andassign Source Numbers. The CAV6.6requires firmware...
Page 6 - COMPONENT GUIDE
6 COMPONENT GUIDE ST2-XM2 FRONT PANEL XM1 XM2 XM1 64 : The Groove 64 : The Groove XM2 MAIN POWER SWITCH - Turns power on and off POWER ON/OFF LED - Indicates power on or off REMOVABLE COVER LENS - Covers the selection buttons on the tuner BANK SELECT BUTTON - Selects bank 1-6 MEMORY SELECT BUTTONS -...
Page 7 - IR INPUT - IR control input (common IR control) for Tuner 2 or Tuner 1; XM TUNER 2
7 RS-232 INTERFACE I N O UT NEWMARKET, NH U.S.A. ST2 Smart Tuner LINK K EYPAD P ORTS Serial# MADE IN KOREA T UNER 1 IR L R A UDIO O UTPUT IR L R A UDIO O UTPUT T UNER 2 A NTENNA A NTENNA 12VDC 1.25A RNET LINK IN/LINK OUT - Links to other Russound components that are RNET compatible, displays frequen...
Page 8 - ST2-RC REMOTE CONTROL
8 TUNE TUNE FAV 1 SEEK ST/ MONO LOC/ DX SEEK TUNE TUNER 1 TUNER 2 4 MEM BANK 1 2 3 5 6 7 8 9 0 PWR MEM TUNE AM/FM FAV 2 OK POWER - Puts the tuner in/out of standby mode TUNER CONTROL - Select TUNER 1 (XM1) or TUNER 2 (XM2) and all subsequent button press-es affect that tuner NUMERIC INPUT - Number b...
Page 9 - ST2-XM2 SETUP AND CONNECTIONS; BASIC CONNECTIONS; Power; ST2-KP keypads are designed for use; Rack Mount Installation
9 ST2-XM2 SETUP AND CONNECTIONS BASIC CONNECTIONS Power To power the tuner, connect the 12VDC externalpower supply by inserting the power supply jackinto the power supply connection on the tuner’srear panel. Audio Output Connect one end of a dual RCA audio cable tothe Tuner 1 Audio Output connection...
Page 10 - ST2 Tuner; RCA Cable
10 ST2 Tuner CAV6.6 UNO-S2keypads RCA Cable 64:The Groove 45:XM Cafe 1.25A Source Connections with CAV6.6 Controller/Amplifier (RNET System) The diagram depicts a typical setup using the ST2-XM2 Tuner with a CAV6.6 amplifier. Each tuner inthe ST2 unit must be connected as a separate source for audio...
Page 11 - CAi SERIES AND ST2-KP CONNECTIONS; Source Connections with CAi Series Controller/Amplifier
ST2-XM2 SETUP AND CONNECTIONS CAi SERIES AND ST2-KP CONNECTIONS RS-232 INTERFACE 12VDC 1.25A I N O UT NEWMARKET, NH U.S.A. ST2 Smart Tuner LINK K EYPAD P ORTS Serial# MADE IN KOREA T UNER 1 IR L R A UDIO O UTPUT IR L R A UDIO O UTPUT T UNER 2 A NTENNA 1 R L 2 1 R L 2 3 4 CA6.4i NEWMARKET, NH U.S.A. ...
Page 12 - ANTENNA CONNECTIONS; XM Antenna; GOOD SIGNAL
12 ST2-XM2 SETUP AND CONNECTIONS ANTENNA CONNECTIONS A NTENNA ST2-XM2 Tuner 12VDC 1.25A XM Antenna Connect the included XM antenna for XM recep-tion to the back panel of the XM module. Theantenna comes with 20 feet of cable. If thislength is not sufficient, there are aftermarketantenna kits availabl...
Page 13 - XM Radio Activation; To activate the XM tuner:; XM Radio Displays; Display Condition; ANTENNA; XM RADIO OVERVIEW
13 XM Radio Activation XM Radio is over 100 channels of radio broadcasts with the signal delivered by satellite and (depend-ing on location) transferred by terrestrial antennas. The radio is a subscription-based service with amonthly provider fee and an activation charge. XM radio broadcasts several...
Page 14 - XM RADIO MODES; XM Radio Modes; Preset; EXIT; For all XM Modes; Operating Mode Toggle; All User Modes; Hold
14 ST2-XM2 OPERATION XM RADIO MODES XM Radio Modes There are four user “modes” for selecting music and viewing music information on the XM Tuner: Preset (default or normal) Category SearchNow PlayingDisplay Preferences . These modes are accessed through certain button and key presses from the tuner ...
Page 16 - Category Search Mode (; AT; Next Category; Previous Category; Category Channel Up; Category Channel Down
16 Category Search Mode ( 1 1..C CA AT T S SE EA AR RC CH H ) XM Radio is organized by Channel Category (e.g., Rock, Country, News ). Within each category is a series of channels (e.g., Top Tracks, Bluegrass Junction, XM Classics). Channel selection in thismode is refined to scrolling only those cha...
Page 17 - Displays the song title or program title.; Display Preference Mode (; Channel Number and Name (
17 ST2-XM ST2-RC ST2-KP UNO-S2 UNO-S1 UNO-LRC1 Display PreferenceMode OK Next Display Preference TUNE MEM MEM Previous Display Preference TUNE MEM MEM ST2-XM2 OPERATION XM RADIO MODES Now Playing Mode ( 2 2..N NO OW W P PL LA AY YN NG G ) This mode displays information about the current XM selection...
Page 18 - Front Panel Operation; FRONT PANEL CONTROLS
18 Front Panel Operation Turning the unit on To turn the unit on, push the On/Off button up on thefront panel. Pushing the On/Off button down turns thetuner off. Selecting the desired tuner From the front panel, use to toggle between the XM tuners. A backlight shows behind the selectedlabel XM1 (gre...
Page 19 - ST2-RC Remote Control Operation
19 ST2-XM2 OPERATION ST2-RC REMOTE CONTROL ST2-RC Remote Control Operation The ST2-RC remote control is the only means ofremote operation of the ST2-XM2 in a non--RNET sys-tem. The ST2-XM2 front panel displays information forthe tuner that is receiving commands from the ST2-RC. However, the ST2-RC c...
Page 20 - ST2-KP KEYPAD CONTROLS; ST2-KP Keypad Operation
20 ST2-XM2 OPERATION ST2-KP KEYPAD CONTROLS ST2-KP Keypad Operation Turning the keypad on/off To activate the ST2-KP, press . Press to power down the keypad display. The keypad remainspowered until the ST2-XM2 Tuner is turned off. Selecting the desired tuner To select a different tuner, press and ho...
Page 22 - SELECT - XM Operating mode toggle
22 ST2-XM2 OPERATION UNO-S2 KEYPAD CONTROLS WITH CAV6.6/CAM6.6 TUNER SELECTION - Select source number assigned to TUNER 1 (XM1) or TUNER 2 (XM2) TUNE UP/DOWN - Used for manual channel selection SELECT - XM Operating mode toggle SEEK - (press) Exit current XM mode SCAN - (press and hold) XM Signal St...
Page 23 - UNO-LRC1 Remote Control Operation
23 UNO-LRC1 Remote Control Operation Turning the unit on The tuner is power managed by the CAV6.6 orother RNET-enabled controller. If the tuner is instandby mode, any button press of the UNO-LRC1 will bring the tuner out of standby modewhen used with the UNO keypad. Selecting the desired tuner To se...
Page 25 - ST2-XM2 TUNER PROGRAMMING; ST2 TUNER SETUP MENU
ST2-XM2 Tuner Setup Menus Note: The Setup Menu procedures must be performed from the ST2-XM2 Tuner front panel. The ST2-XM2 Tuner Setup Menus provide setup and naming procedures for the ST2-XM2 main chas-sis and the XM tuner modules. These procedures include source number assignments, assigning acus...
Page 27 - ST2 Chassis Setup Procedures
27 ST2-XM2 TUNER PROGRAMMING ST2 TUNER SETUP MENU TNR SEL Press and Hold TNR SEL button ST2 Chassis Setup Procedures TNR SEL TNR SEL This Procedure returns the ST2 Tuner to its Factory settings SOURCE NUM Procedure FACTORY INIT Procedure UPDATE FIRMW Procedure SYSTEM INFO Procedure HOLDBAND After up...
Page 28 - A memory preset; XM Setup Menu
Tuner Setup Menu for XM Memory Name A memory preset must be created and saved before it can be named (see page 18). Once it is saved, the preset’s Tuner #, Bank # and Memory# must be entered in the following procedure. 1. Enter the Setup Menu by pressing and holding the TNR SEL button. Press TNR SEL...
Page 30 - Bank Name
30 ST2-XM2 TUNER PROGRAMMING ST2 TUNER SETUP MENU Bank Name A custom name can be assigned to each of thesix banks of Tuner 1 (XM). 1. Enter the Setup Menu by pressing and holding the TNR SEL button. 2. TUNER SETUP appears. Press BAND. 3. MEMORY NAME appears. Press MEM Up/Down until BANK NAME appears...
Page 31 - Backup and Restore
31 ST2-XM2 TUNER PROGRAMMING ST2 TUNER SETUP MENU Press TNR SEL button to select XM Tuner XM Setup Menu Controller, Diagnostics, Factory Initialization and System Info Procedures TNR SEL TNR SEL MEM NAME Procedure TNR SEL BANK NAME Procedure XMSetupMenu FACTORY INIT Procedure CONTROLLR ID Procedure ...
Page 32 - is connected. Press the Play button to enter your choice.; Repeat steps 4 through 7 to configure the second tuner.; PROGRAMMING FOR CAV6.6 USE
32 NOTE: The CAV6.6 firmware must be version 2.00.01 or higher, and UNO-S2 firmware must be version 3.00.01 or higher to control the ST2-XM2 Tuner. Use the System Info Menu of the CAV6.6 to check the firmware version. If the firmware is not the proper revision as noted here, visit the Document Cente...
Page 33 - SOURCE NUM appears again.; PROGRAMMING FOR CAM6.6 USE
NOTE: The CAM6.6 firmware must be version 1.00.11 or higher and UNO-S1 firmware must be version 1.00.21 or higher to control the ST2-XM2 Tuner. Use the System Info Menu of the CAM6.6 to check the firmware version. If the firmware is not the proper revision as noted here, visit the Document Center at...
Page 34 - 0-ohm SMB connection; TECHNICAL SPECIFICATIONS
34 ST2-XM2 Smart Tuner Dimensions: 17"W x 8"D x 1.8"H (43 x 20.3 x 4.4 cm) Weight: 7 lbs. (3.2kg) Power Supply: 12VDC 1.25A XM Band: 2332.5 - 2345 MHz XM Antenna: 50-ohm SMB connection TECHNICAL SPECIFICATIONS It is prohibited to copy, decompile, disassemble, reverse engineer, or manipul...
Page 36 - All trademarks are property of their respective owners.
Russound5 Forbes Road, Newmarket, NH 03857tel 603.659.5170 • fax 603.659.5388e-mail: [email protected] www.russound.comE. & O.E. Copyright © 2005 Russound ® All rights reserved. All trademarks are property of their respective owners. 28-1170 03/23/05 2
