Russound DIM-1 - Manual
Russound DIM-1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – system. You will be making open wire connections to the doorbell.; Figure 1
- Page 3 – CAi Series Connection:; /8” mini plug into the Mute Input connection. Refer to Figure 4.; CAV Series Connection:; mini plug into the Page Trigger Input connection. Refer to Figure 5.; Figure 2; Figure 4; CAi Series
- Page 4 – Operating Instructions; should be on. After 6 seconds the green LED will go out.; Limited Warranty
DIM-1
Doorbell Interface Module
Instruction Manual
TRIG OUT
TRIG
+12VDC
DB3
DB2
DB1
TRANS
POWER
DOORBELL INTERFACE
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Product Overview The DIM-1 Doorbell Interface Module’s primary purpose is to mute a multi-source/multi-zone audio system so a preexisting doorbell can be heard when itrings. The DIM-1 does not generate an audible chime, but provides a six-second12V trigger to the multi-zone system which is used to m...
switched contacts at the doorbell chime module to the connectionslabeled “DB1,” “DB2” and “DB3” on the DIM-1. This connects up to 3separate doorbell buttons to the DIM-1. Refer to Figure 1. Note that theconnectors can be unplugged for easy wiring. 4) Connection to Multi-zone System: The trigger outp...
Operating Instructions 1) Power the doorbell system and your audio distribution system.2) Plug the 12VDC power supply into the DIM-1. The red and green LED should be on. After 6 seconds the green LED will go out. 3) Ring the doorbell. The green LED on the DIM-1 should illuminate for 6 seconds and th...
