Russound Contractor Series - Manual
Russound Contractor Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Selecting the proper gauge:; WHERE TO PLACE YOUR CEILING SPEAKERS
- Page 3 – Corners and Reflections:; SPEAKER WIRE PATHS
- Page 5 – No sound from either speaker:
- Page 6 – TAKING CARE OF YOUR NEW CEILING SPEAKERS; The main “killers” of any loudspeaker system are:; MORE ON SPEAKER WIRES AND AMPLIFIER IMPEDANCE
- Page 7 – SPEAKER SPECIFICATIONS
- Page 8 – Nominal Impedance: 8 ohms
- Page 9 – WARRANTY; This Warranty Does Not Cover:
- Page 10 – NOTES
built for sound - priced for value
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 INTRODUCTION Thank you for selecting the Russound Contractor Series In-wall/In-ceil-ing Speakers. Like all Russound speakers, they combine acoustic technol-ogy with durability and will provide years of musical enjoyment. Anadded feature of models SP-C503, SP-C522 and SP-C622 is the dualvoice coil ...
3 Corners and Reflections: When a ceiling speaker is placed close to the corner of a room, bass fre-quencies are emphasized. This is fine if both speakers are mounted nearcorners (while maintaining stereo imaging), but try to avoid placing justone speaker in a corner and another on a long flat surfa...
5 AT THE AMPLIFIER END 1. Cut off excess wire, leaving enough to comfortably reach from the hole in the wall to your stereo system. If there’s a possibility thatyou’re going to move the amplifier to another part of the room, con-sider leaving some excess wire coiled up. If you’ve used sufficientlyth...
