Page 2 - Wiytamo; TABLE OF CONTENTS; SYMBOLS FROM THE UNIT AND USER MANUAL
Wiytamo [email protected] [email protected] Wiytamo 2 TABLE OF CONTENTS 1. BEFORE YOU BEGIN ................................................................................................3 1.1. CUSTOMER SERVICE ...........................................................................................
Page 3 - WELCOME
Wiytamo [email protected] [email protected] Wiytamo 3 1. BEFORE YOU BEGIN WELCOME Thank you for purchasing this Wiytamo product. All Wiytamo products aremanufactured with great care and are DOE 、 ETL certified. In addition, our products are tested and inspected strictly prior to shipment to ensure p...
Page 4 - Required Information
Wiytamo [email protected] [email protected] Wiytamo 4 information will delay the processing of the problem. Please contact us: [email protected] Required Information ① Nature of malfunction(as accurately as possible) Damaged: includes picture and video about damage parts Quality Problem: include...
Page 5 - improve the shipping box's strength from your information.; The Process of Receiving and Inspection; Please check the outer shipping box and product carefully.
Wiytamo [email protected] [email protected] Wiytamo 5 improve the shipping box's strength from your information. 1.2.2 The Process of Receiving and Inspection Step 1 Please check the outer shipping box and product carefully. Step 2 If there is any problem, please take some photos and videos for ...
Page 6 - Take some pictures about all the labels on the shipping box.; How to take a useful video:; To show the outer packaging box is damaged but not unpacked; If the unit is delivered by a truck, please take the receipt with
Wiytamo [email protected] [email protected] Wiytamo 6 3 Take some pictures about all the labels on the shipping box. 4 Take some videos to show the condition of the shipping box and inner product more intuitively. How to take a useful video: To show the outer packaging box is damaged but not unpac...
Page 7 - CAUTION; To prevent any electrical shock hazards, do not disconnect; please
Wiytamo [email protected] [email protected] Wiytamo 7 CAUTION To prevent any electrical shock hazards, do not disconnect the power cord plug from the wall outlet with wet hands. ① The unit is not operating. Check the power connection in securely. Check if the water level indicator lights up? C...
Page 9 - warning; THE FOLLOWING SHOULD ALWAYS BE OBSERVED FOR SAFETY
Wiytamo [email protected] [email protected] Wiytamo 9 1.4. SYMBOLS FROM THE UNIT AND USER MANUAL warning This unit uses a flammable refrigerant.If refrigerant leaks and comes in contact with fire or heatingpart, it will create harmful gas and there is risk of fire. Read the USER MANUAL carefully bef...
Page 10 - It collects first in low areas but can be circulated by the fans.; FAILURE TO ABIDE BY THIS WARNING COULD RESULT IN AN
Wiytamo [email protected] [email protected] Wiytamo 10 It collects first in low areas but can be circulated by the fans. If propane gas is present or even suspected, do not allowuntrained personnel to attempt to find the cause. The propane gas used in the unit has no odor. The lack of smell ...
Page 11 - for detailed information.
Wiytamo [email protected] [email protected] Wiytamo 11 1.5. PRODUCT DIAGRAM 1 Control panel 4 Air inlet with air filter 7 Drain opening with sealing plug 2 Air outlet with adjustable louver 5 Recessed handle 8 Castor 3 Front Panel 6 Air Exhaust Note: The appearance is only for reference. Please see ...
Page 13 - Your safety is the most important thing we concerned!; WARNING- to reduce the risk of fire, electric shock or injury to; Always use a power outlet that is grounded.; WARNING; Please read this manual carefully and fully
Wiytamo [email protected] [email protected] Wiytamo 13 2. FOR YOUR SAFETY Your safety is the most important thing we concerned! 2.1. OPERATIONAL PRECAUTIONS WARNING- to reduce the risk of fire, electric shock or injury to persons or property: If the supply cord is damaged, it must be replaced by t...
Page 15 - Keep any required ventilation openings clear of obstruction.; contact the dealer services.; servicing an appliance with R32.
Wiytamo [email protected] [email protected] Wiytamo 15 Keep any required ventilation openings clear of obstruction. The appliance shall be stored in a well-ventilated area where the roomsize corresponds to the room area as specified for operation. WARNING Any person who is involved with working ...
Page 16 - Checking for presence of refrigerant
Wiytamo [email protected] [email protected] Wiytamo 16 2.2.2 Work procedure Work shall be undertaken under a controlled procedure so as to minimizethe risk of a flammable gas or vapor being present while the work is beingperformed. 2.2.3 General work area All maintenance staff and others working in ...
Page 17 - Checks to the refrigeration equipment
Wiytamo [email protected] [email protected] Wiytamo 17 refrigerant can possibly be released to the surrounding space. Prior towork taking place, the area around the equipment is to be surveyed tomake sure that there are no flammable hazards or ignition risks. “NoSmoking” signs shall be displayed. 2....
Page 18 - The manufacture may provide other suitable example or
Wiytamo [email protected] [email protected] Wiytamo 18 constructed of materials which are inherently resistant to being corrodedor are suitably protected against being so corroded. 2.2.9 Checks to electrical devices Repair and maintenance to electrical components shall include initialsafety checks a...
Page 19 - If there are any problems or missing parts, please contact us
Wiytamo [email protected] [email protected] Wiytamo 19 3. INSTALLATION 3.1. UNPACKING Unpack the carton and take the appliance and accessories out. Check the device after unpacking for any damage or scratches on it. Accessories: Part Description Quantity Part Description Quantity Exhaust hose ...
Page 20 - If tipped more than 45°, allow
Wiytamo [email protected] [email protected] Wiytamo 20 3.2. CHOOSE YOUR LOCATION If tipped more than 45°, allow the unit to set upright for at least 24 hours before start up. Place the unit on a firm, level surface in an area with at least 70cm of free space around it to allow for proper air cir...
Page 21 - efficiency, even worse shut down the unit due to low backpressure.
Wiytamo [email protected] [email protected] Wiytamo 21 3.3. ATTACH THE EXHAUST HOSE The air conditioner requires being vented outside so that the exhaust air can escape the room which coming from the appliance contains waste heat and moisture. Do not replace or extend exhaust hose which will result ...
Page 22 - Close your window to secure the kit in place. It needs to hold
Wiytamo [email protected] [email protected] Wiytamo 22 Step 4: Close your window to secure the kit in place. It needs to hold the windows kit firmly in place, secure the window kit with duct tape ifrequired. It is recommended that the gap between the adapter and thesides of the window should be seal...
Page 23 - Adjusting the length of the flexible exhaust hose, to make
Wiytamo [email protected] [email protected] Wiytamo 23 Step 6: Adjusting the length of the flexible exhaust hose, to make sure the distance between the unit and the window will bemore than 70cm, height from exhaust hose to the floor will bemore than 90cm. And avoid bends in the hose. Then place ACne...
Page 24 - OPERATION
Wiytamo [email protected] [email protected] Wiytamo 24 4. OPERATION 4.1. CONTROL PANEL AND DISPLAY ① Press the key to set timing value. ② Toggle between high, medium, and low fan speeds. ③ LED for fan speed (high, medium, low) and wifi status ④ Automatic swing mode of air outlet plate ⑤ Displays tim...
Page 25 - Information on the App; The; “Smart Life”; app is available for android and iOS.; Information on How to Use the App
Wiytamo [email protected] [email protected] Wiytamo 25 4.2. WIFI CONNECTED Information on the App “Smart Life” The “Smart Life” app is available for android and iOS. Scan the corresponding QR code to get directly to the download. Information on How to Use the App This appliance allows you to operate...
Page 26 - If the WIFI indicator flash slowly, press “; Go to Connect; ” to
Wiytamo [email protected] [email protected] Wiytamo 26 ● Method 1 1. First, power on the device, the device is under networkconfiguration mode as default within the 3 minutes after power on.2. Turn on your phone or other device's Bluetooth and connect toyour home WIFI.3. Click "Add" on the c...
Page 28 - B. Ventilating your room; In ventilation mode the room air is circulated, but not cooled.
Wiytamo [email protected] [email protected] Wiytamo 28 4.4. SETTINGS 4.4.1. Start-up and Shutdown Press the to turn the unit on. The unit runs in in FAN as default.Press MODE button to select the desired operation mode.Press the again to turn off the power. 4.4.2. Operation mode The unit has four ...
Page 30 - The timer has two ways of operation:; POWER; In the event of a power loss, to protect the compressor there is a 3-
Wiytamo [email protected] [email protected] Wiytamo 30 4.4.3. TIMER SETTING （ 1hour-24hours ） : The timer has two ways of operation: To turn off (When power on) To turn on (When power off) Cancel timer 4.4.4. Automatic Defrost At low room temperatures, frost may buildup at the evaporator during oper...
Page 31 - When the machine stops after the water is full, please unplug the
Wiytamo [email protected] [email protected] Wiytamo 31 4.5. DRAINAGE Manual drainage: 1 ） When the machine stops after the water is full, please unplug the power plug.Notes: Please move the machine carefully, so as not to spill the water in the water pan at the bottom of the body.2 ） Place the water...
Page 32 - Continuous drainage; can be automatically flow into a bucket or drain by gravity.; To avoid water spillage:
Wiytamo [email protected] [email protected] Wiytamo 32 Continuous drainage The self-evaporating system uses the collected water to cool the condenser coils for better efficient performance. It is no need to empty the drainage tank in cooling operation except in heating operation, drying operation an...
Page 33 - easy cleaning. Do not operate the unit without an air filter, or the; Do not touch the evaporator surface with bare-hand, or
Wiytamo [email protected] [email protected] Wiytamo 33 5. CLEANING AND CARE 5.1. CLEANING THE AIR FILTER (every two weeks) Dust collects on the filter and restricts the airflow. The restricted airflow reduces the efficiency of the system and if it becomes blocked it can cause damage to the unit.The ...
Page 34 - particularly at or below ground level.
Wiytamo [email protected] [email protected] Wiytamo 34 5.2. CLEANING UP OF REFRIGERANTGeneral Measures: 1. Gas/vapor heavier than air. May accumulate in confined spaces, particularly at or below ground level. 2. Eliminate every possible source of ignition.3. Use appropriate personal protection equip...
Page 35 - Symptom
Wiytamo [email protected] [email protected] Wiytamo 35 6. OPERATION Symptom Inspection Solution The unit is not operating. Check the power connection in securely . Insert the power cord securely into the wallOutlet. Check if the water level indicator lights up? Empty the drain pan by remove ...
Page 36 - Releasing refrigerant into atmosphere is strictly
Wiytamo [email protected] [email protected] Wiytamo 36 7. DECOMMISSIONING 7.1. STORAGE Long-Term Storage - If you will not be using the unit for an extended period of time (more than a few weeks) it is best to clean the unit and dry it out completely. Please store the unit per the following steps: 7...
