RSA Lighting TXP4-X - Manual
RSA Lighting TXP4-X – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
DESCRIPTION
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
www.cooperlighting.com
Thermal
Protector
4.65”
9.29”
10.12”
10.79”
12.09”
7.95”
9.27”
6.15”
4.65”
7.45”
Required
above
ceiling
45º x 45º
Adjust
Double
Gimbal
Wiring
Compartment
A ... Housing
Housing and junction box are aluminum,
trim assembly is steel with powder coated
finish. Fixture utilizes a removable trim
sleeve to provide a 0.75” flange around
the ceiling opening and to help conceal
the inner hardware of the fixture from sight
below the ceiling. Can accommodate
various ceiling thickness.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through branch
wiring, 6 #12 90º C supply conductors or
60º C for end of run. The fixture is also UL
listed as ‘access above ceiling not required’.
D ... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side
wall of the housing behind removable
access doors. Electrical components on
individually removable “trays” for easy
maintenance.
E ... Lamps
Two (2) PAR20 120V lamps mounted in
adjustable double gimbal. Lamp holders
are removable and may be regressed 1”
for additional cut-off. Lamps can accept
up to three optical accessories
(i.e. lens
+ hex louver + snoot)
. 45º x 45º locking
lamp adjustment. Beveled-edge lamp
ring is secured with threadless, bayonet
action. Optional retractable arm is avail-
able for lamp pulldown and extreme aim-
ing. Includes Med. Base sockets.
F ... Mounting
A mounting frame is provided which
inserts into the ceiling opening. The
housing is then pushed through the
mounting frame and secured with
screws.
G ... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 5.90” x 10.38”
COMBOLIGHT
®
Next Generation
Recessed
Multi-Lamp Fixture
Two (2) Light
PAR20 120V
Remodel Housing
w/ 0.75” Trim Flange
ORDERING INFORMATION
An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable for
downlighting and accent applications. Utilizes TWO (2) PAR20 120V lamps.
For remodel applications. Insulation must be kept 3” from all sides and at least
1” above the housing.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
rev 072908
For use with 50W PAR20 120V lamps.
Configuration
C2
=
COMBOLIGHT
Recessed Two (2) Light
Housing
R
=
Remodel
C2
R
N
120
T
Lamp Type / Wattage Label
050P20
=
50 Watt max. PAR20 120V
Power Supply
N
=
None - Line Voltage Lamp
Primary Voltage
1
=
120V
Lamp Mechanism
G
=
Double Gimbal
R
=
Retractable Double Gimbal
Trim Finish
W
=
White
B
=
Black
S
=
Industrial Silver
Trim Flange
T
=
0.75” Trim Flange
Housing Interior/Electrical Door/Sleeve
Finish
W
=
White
B
=
Black
S
=
Industrial Silver
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
