RSA Lighting 62-14410001 - Manual
RSA Lighting 62-14410001 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
DESCRIPTION
Catalog #
Type
Project
Comments
Date
Prepared by
SPECIFICATION FEATURES
www.cooperlighting.com
Thermal
Protector
7.45”
4.65”
27.87”
40.46”
29.37”
44.59”
15.01”
6.14”
4.64”
Integral Electronic
Metal Halide Ballasts
45º x 45º
Adjust
Double
Gimbal
A ... Housing
Housing, junction box & trim assembly
are all steel construction. Fixture utilizes
a removable trim sleeve to provide a
0.75” flange around the ceiling opening
and to help conceal the inner hardware
of the fixture from sight below the ceiling.
Can accommodate 0.50” to 1.25” ceiling
thickness. Optional Chicago Plenum
configuration available.
B ... System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
holes in housing provide cooler operation.
C ... Junction Box
Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply con-
ductors or 60º C for end of run. The fixture
is also UL listed as ‘access above ceiling
not required’.
D ... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side wall
of the housing behind removable access
doors. Integral electronic metal halide
ballasts on individually removable “trays”
for easy maintenance. May also be con-
figured for remote power.
E ... Lamps
Six (6) PAR20 Metal Halide lamps mounted
in adjustable double gimbals. Lamp holders
are individually removable and may be re-
gressed 1” for additional cut-off. Lamp can
accept up to three optical accessories
(i.e.
lens + hex louver + snoot)
. 45º x 45º locking
lamp adjustment. Beveled-edge lamp ring
is secured with threadless, bayonet ac-
tion. Optional retractable arm is available
for lamp pulldown and extreme aiming.
Includes Med. base sockets.
F ... Mounting
Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers. Four tabs on housing for
securing to structure.
G ... Labels
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Ceiling Cut-Out: 5.44” x 28.67”
COMBOLIGHT
®
Next Generation
Recessed
Multi-Lamp Fixture
Six (6) Light
PAR20 Metal Halide
New Construction
Housing
w/ 0.75” Trim Flange
ORDERING INFORMATION
An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable
for downlighting and accent applications. Utilizes SIX (6) PAR20 Metal Halide
lamps.
For new construction applications. Insulation must be kept 3” from all sides
and at least 1” above the housing.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
rev 022408
Configuration
C6
=
COMBOLIGHT
Recessed Six (6) Light
Housing
N
=
New Construction
C
=
Chicago Plenum
C6
E
T
Lamp Type / Wattage Label
020M20
=
20 Watt PAR20 Metal Halide
039M20
=
39 Watt PAR20 Metal Halide
Power Supply
E
=
Electronic Metal Halide
Ballast
Power Supply
Voltage
1
=
120V
2
=
277V
Lamp Mechanism
G
=
Double Gimbal
R
=
Retractable Double Gimbal
Trim Finish
W
=
White
B
=
Black
S
=
Industrial Silver
Trim Flange
T
=
0.75” Trim Flange
Housing Interior/Electrical Door/Sleeve
Finish
W
=
White
B
=
Black
S
=
Industrial Silver
For use with 20W or 39W PAR20MH lamps.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
