Rose Electronics 4XE - Manual
Rose Electronics 4XE – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – UltraMatrix Single unit Installation; Connect a KVM station to the KVM 1 DB25F connector using the
- Page 3 – Operating Instructions
- Page 4 – Keyboard commands; Command
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
UltraMatrix Single unit Installation The following installation procedure features the 4XE model. Installation for other models (2, 4, or 8 computers) follow the same basic procedure. It is recommended that power to all monitors, computers, and UltraMatrix be off until all connections have been made...
Operating Instructions With all cabling in place and power applied to all equipment, the video monitor connected to KVM port #1 should display the video from computer #1 (default). Switching to other computers is accomplished by: 1. Keyboard commands (press and release left Ctrl key + CPU #) (LCtrl ...
Copyright Rose Electronics 2007. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transcribed in any form or any means, electronic or mechanical, including photocopying and recording, without the prior written permission of Rose Electronics. Rose E...
