Rolls SX45 - Manual
Rolls SX45 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
SX45 Stereo T wo
-W
ay Crossover
Rolls Corporation
Salt Lake City, UT
10/06
- Studio
- Live
- Install
... anywhere you need compact, accurate
frequency separation.
SX45 Crosso
ver
WARRANTY
For information on the Rolls One Year Limited Warranty, and
to register this product, visit our website at
www.rolls.com
SPECIFICATIONS
Input Impedance:
10K Ohm
Output Impedance:
1K Ohm
Headroom:
+10 dBV
Power Requrements:
12 - 16 VDC, 150 mA;
Rolls part number PS27
Size:
4.25" x 3.625" x 1.5"
Weight:
1 lb.
SX45
Stereo Two-Way Crossover
The SX45 is a unique frequency dividing device for small
sound reinforcement applications. The unit features a 12
dB/Octave rolloff rate, a frequency dividing range of 50Hz to
2.5kHz, and an external power supply for noise reduction. All
this in a compact package with a compact price.
• 12 dB/Octave rolloff
• Stereo RCA Input and Outputs
• 50Hz to 2.5 kHz crossover range
• Mono Sub Output
INTRODUCTION
Thank you for your purchase of the SX45 Tiny Two-Way Cross-
over. The SX45 is desgned and manufactured to provide years of
service. Modern sound reinforcement applications require clean,
precise signal dividing for maximum efficiency and best sound. The
SX45 circuitry provides just that function.
Please review this manual to get the best performance from this
unit.
DESCRIPTION
FRONT PANEL
INPUT: Adjusts the input level to the SX45.
FREQUENCY: Selects the crossover frequency from 50Hz to
2.5kHz.
LOW LEVEL: Adjusts the amount of output signal from the LOW
OUT jacks.
HIGH LEVEL: Adjusts the amount of output signal from the HIGH
OUT jacks.
CLIP LED: Indicates overload in the SX45. This LED lights 3 dB
before actual circuit clipping occurs.
PWR LED: Indicates the SX45 power supply is connected to the
unit and an AC outlet.
REAR PANEL
(Note: The rear panel jacks are labeled on the top of the unit.)
INPUT: Dual RCA jacks for connecting to the output of a mixer or
other device containing the signals to be divided.
HIGH OUT: Dual RCA jacks containing the signal of frequencies
above
the crossover frequency.
LOW OUT: Dual RCA jacks containing the signal of frequencies
below
the crossover frequency.
MONO LOW OUT: Dual RCA jacks with a mono, combined signal
from the stereo Low Out jacks.
DC IN: For connection to an external power supply, 12-16 volts DC,
150 mA; Rolls model PS27.
SX45 Crosso
ver
SX45 Crosso
ver
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
