Roland RD-700GX - Manual
Roland RD-700GX – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – MIDI Implementation; Program Change
- Page 3 – Pitch Bend Change; Channel Mode Messages; Reset All Controllers (Controller number 121); System Realtime Message; Timing Clock; System Exclusive Message; Universal Non-realtime System Exclusive Messages
- Page 4 – Universal Realtime System Exclusive Messages
- Page 5 – Data Transmission
- Page 6 – Channel Voice Messages; Note off
- Page 13 – Decimal and Hexadecimal Table; Examples of Actual MIDI Messages
- Page 14 – How to calculate the checksum; ASCII Code Table
Digital Piano
Model: RD-700GX
Date: Feb. 1, 2008
Version: 1.00
1
MIDI Implementation
1. Receive data
■
Channel Voice Messages
●
Note off
Status
2nd byte
3rd byte
8nH
kkH
vvH
9nH
kkH
00H
n = MIDI channel number:
0H - FH (ch.1 - 16)
kk = note number:
00H - 7FH (0 - 127)
vv = note off velocity:
00H - 7FH (0 - 127)
*
Some instruments are not received in Rhythm set.
●
Note on
Status
2nd byte
3rd byte
9nH
kkH
vvH
n = MIDI channel number:
0H - FH (ch.1 - 16)
kk = note number:
00H - 7FH (0 - 127)
vv = note on velocity:
01H - 7FH (1 - 127)
●
Control Change
❍
Bank Select (Controller number 0, 32)
Status
2nd byte
3rd byte
BnH
00H
mmH
BnH
20H
llH
n = MIDI channel number:
0H - FH (ch.1 - 16)
mm, ll = Bank number:
00 00H - 7F 7FH (bank.1 - bank.16384)
*
Not received when the Rx Bank Select (EDIT: Part Parameter: Rx Bank Select) is OFF.
*
The SETUP, Rhythms, and Tones corresponding to each Bank Select are as follows.
*
The SRX series corresponding to each Bank Select are to see the SRX series owner’s
manual.
BANK SELECT | PROGRAM | GROUP | NUMBER
MSB | LSB | NUMBER | |
-----+---------+-----------+----------------------+-----------
000 | | 001 - 128 | GM Tone |
: | | | |
032 | | 001 - 128 | GM Tone |
085 | 000 | 001 - 100 | SETUP | 001 - 100
086 | 064 | 001 - 005 | Rhythm Set | 263 - 267
087 | 064 | 001 - 026 | Tone (PIANO) | 001 - 026
| 065 | 001 - 021 | Tone (E.PIANO) | 037 - 057
| 066 | 001 - 031 | Tone (CLAV/MALLET) | 058 - 088
| 067 | 001 - 022 | Tone (ORGAN) | 099 - 120
| 068 | 001 - 026 | Tone (STRINGS) | 121 - 146
| 069 | 001 - 024 | Tone (PAD) | 147 - 170
| 070 | 001 - 038 | Tone (GTR/BASS) | 171 - 208
| 071 | 001 - 028 | Tone (BRASS/WINDS) | 209 - 236
| 072 | 001 - 026 | Tone (VOICE/SYNTH) | 237 - 262
| : | | : |
092 | 000 - | 001 - | SRX Rhythm | 001 -
| : | | : |
093 | 000 - | 001 - | SRX Patch | 001 -
| : | | : |
112 | 000 | 001 - 010 | TW-Organ | 089 - 098
113 | 000 | 001 - 010 | S.NaturlEP | 027 - 036
120 | | 001 - 057 | GM2 Rhythm | 268 - 276
121 | 000 - | 001 - 128 | GM2 Tone | 277 - 532
❍
Modulation (Controller number 1)
Status
2nd byte
3rd byte
BnH
01H
vvH
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Modulation depth:
00H - 7FH (0 - 127)
*
Not received when the Rx Modulation (EDIT: Part Parameter: Rx Modulation) is OFF.
❍
Portamento Time (Controller number 5)
Status
2nd byte
3rd byte
BnH
05H
vvH
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Portamento Time:
00H - 7FH (0 - 127)
*
The Portament Time parameter (Tone Info: Portament Time) will change.
❍
Data Entry (Controller number 6, 38)
Status
2nd byte
3rd byte
BnH
06H
mmH
BnH
26H
llH
n = MIDI channel number:
0H - FH (ch.1 - 16)
mm, ll = the value of the parameter specified by RPN/NRPN
mm = MSB, ll = LSB
❍
Volume (Controller number 7)
Status
2nd byte
3rd byte
BnH
07H
vvH
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Volume:
00H - 7FH (0 - 127)
*
Not received when the Rx Volume (EDIT: Part Parameter: Rx Volume) is OFF.
*
The Part Level parameter will change.
❍
Panpot (Controller number 10)
Status
2nd byte
3rd byte
BnH
0AH
vvH
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Panpot:
00H - 40H - 7FH (Left - Center - Right),
*
Not received when the Rx Pan (EDIT: Part Parameter: Rx Pan) is OFF.
*
The pan parameter (EDIT: Part Parameter: Pan) will change.
❍
Expression (Controller number 11)
Status
2nd byte
3rd byte
BnH
0BH
vvH
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Expression:
00H - 7FH (0 - 127)
❍
General Purpose Controller 1 (Controller number 16)
Status
2nd byte
3rd byte
BnH
10H
vvH
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Control value:
00H - 7FH (0 - 127)
❍
Hold 1 (Controller number 64)
Status
2nd byte
3rd byte
BnH
40H
vvH
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Control value:
00H - 7FH
*
Not received when the Rx Hold-1 (EDIT: Part Parameter: Rx Hold-1) is OFF.
❍
Portamento (Controller number 65)
Status
2nd byte
3rd byte
BnH
41H
vvH
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Control value:
00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON
*
The Portamento Sw parameter (Tone Info: Portament Sw) will change.
❍
Sostenuto (Controller number 66)
Status
2nd byte
3rd byte
BnH
42H
vvH
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Control value:
00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON
❍
Soft (Controller number 67)
Status
2nd byte
3rd byte
BnH
43H
vvH
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Control value:
00H - 7FH (0 - 127)
❍
Legato Foot Switch (Controller number 68)
Status
2nd byte
3rd byte
BnH
44H
vvH
n = MIDI channel number:
0H - FH (ch.1 - 16)
vv = Control value:
00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON
Copyright © 2008 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 MIDI Implementation ❍ Resonance (Controller number 71) Status 2nd byte 3rd byte BnH 47H vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv= Resonance value (relative change): 00H - 7FH (-64 - 0 - +63) * The Resonanse parameter (Tone Info: Resonance) will change. ❍ Release Time (Controller number ...
3 MIDI Implementation ● Pitch Bend Change Status 2nd byte 3rd byte EnH llH mmH n = MIDI channel number: 0H - FH (ch.1 - 16) mm, ll = Pitch Bend value: 00 00H - 40 00H - 7F 7FH (-8192 - 0 - +8191) * Not received when the Rx Bender parameter (EDIT: Part Parameter: Rx Bender) is OFF. ■ Channel Mode Mes...
4 MIDI Implementation ❍ GM2 System On Status Data byte Status F0H 7EH 7FH 09H 03H F7H Byte Explanation F0H Exclusive status 7EH ID number (Universal Non-realtime Message) 7FH Device ID (Broadcast) 09H Sub ID#1 (General MIDI Message) 03H Sub ID#2 (General MIDI 2 On) F7H EOX (End Of Exclusive) * Not r...
