Page 2 - A tuner function is included; Owner’s Manual; Guitar Amplifi er
Por tuguês Italiano Deutsch N eder lands Español Fr anç ais English Two-channel switchable design with JC CLEAN channel and LEAD channel, plus a Solo function (p. 12) • The JC CLEAN channel delivers clean sounds, and the LEAD channel gives you acoustic, clean, crunch, high-gain, and an original “dyn...
Page 3 - CAUTION; USING THE UNIT SAFELY; ALWAYS OBSERVE THE FOLLOWING
2 WARNING (for CUBE-80XL only)Connect mains plug of this model to a mains socket outlet with a protective earthing connection.Do not open or perform any internal modifica- tions on the unit.Do not attempt to repair the unit, or replace parts within it (except when this manual provides specific instr...
Page 4 - IMPORTANT NOTES
3 Por tuguês Italiano Deutsch N eder lands Español Fr anç ais English Power Supply • Do not connect this unit to same electrical outlet that is being used by an electrical appliance that is controlled by an inverter (such as a refrigerator, washing machine, microwave oven, or air conditioner), or th...
Page 5 - JC CLEAN Channel; Panel Descriptions; Control Panel
4 1. INPUT Jack Connect your electric guitar here. 2. [SELECT] Switch Switches between the JC CLEAN and LEAD channels.The indicator shows you which channel is selected.Channels can be switched using optional BOSS FS-5U, FS-5L or FS-6 foot switches. 3. [TUNER] Switch Use this when you want to tune yo...
Page 6 - LEAD Channel; SOLO Function
5 Por tuguês Italiano Deutsch N eder lands Español Fr anç ais English LEAD Channel 6. Type switch Use this to select the COSM amp type.If the Tuner function is on, use this to select the string that you’re tuning. Type Description ACOUSTIC SIM This is an original amp type that includes an acoustic s...
Page 7 - Setting the Delay Time for Short Delay; To use the Looper function
6 EQUALIZER 11. [BASS] Knob This adjusts the sound level of the low-frequency range. 12. [MIDDLE] Knob This adjusts the sound level of the middle-frequency range. 13. [TREBLE] Knob This adjusts the sound level of the high-frequency range. * When the LEAD channel Type switch is set to BLACK PANEL, DL...
Page 8 - POWER; Switching the Power On and Off
7 Por tuguês Italiano Deutsch N eder lands Español Fr anç ais English [REVERB] 19. [REVERB] Knob You can switch between use of two types of reverb by changing the position of the knob. You can adjust the intensity of the eff ect by varying the knob position.The indicator lights up when reverb is on ...
Page 9 - Rear Panel; Settings for momentary-type foot
8 Rear Panel Speaker Cable Recorder, etc. CD PlayerDigital Audio Player etc External Speaker INPUT SOLO REVERB EFX CH SELECT Foot switches Mixer, etc. Headphones CUBE-80XL 1 2 3 4 6 7 5 8 DELAY/REC/PLAY/DUB DELAY/REC/PLAY/DUB TAP/STOP TAP/STOP Recorder, etc. CD PlayerDigital Audio Player etc SOLO RE...
Page 10 - FOOT SW; When using as an output jack for recording; AUX IN
9 Por tuguês Italiano Deutsch N eder lands Español Fr anç ais English FOOT SW By connecting a foot switch (BOSS FS-5U or FS-6; sold separately), you’ll be able to use your foot to switch between channels, turn EFX, Reverb, and Delay on/off , and control the Looper function. The connection diagram at...
Page 11 - Using a Latch-type Foot Switch; FOOT SW TYPE setting; Foot Switch Settings; Important Notes When Using a Latch-type Footswitch Pedal; Convenient Applications; Foot switch priority mode
10 Using a Latch-type Foot Switch The CUBE-40XL/CUBE-80XL also support latch-type foot switches. If you’re using a latch-type foot switch, make the following settings. FOOT SW TYPE setting There are two types of foot switches. Type Operation Momentary type (BOSS FS-5U, etc) This type remains on (or ...
Page 12 - Using the Tuner Function; Manual Tuning; Chromatic Tuning
11 Por tuguês Italiano Deutsch N eder lands Español Fr anç ais English Using the Tuner Function CUBE-40XL and CUBE-80XL are equipped with a tuner function. In addition to manual tuning, you can also use it as a chromatic tuner. * Use manual tuning when the strings are substantially out of tune (such...
Page 13 - Saving the Panel Settings; Recalling the Saved Sound; Using the SOLO Function
12 You can save and call up the panel settings (those enclosed by the line in the fi gure) for sounds you create. On this unit, this function is called “SOLO.” This is a convenient way to switch between a backing sound and a solo sound. You can save one setting each for the JC CLEAN channel and for ...
Page 14 - Switching the SOLO Function and the LEAD; Returning to the Factory-default Settings
13 Por tuguês Italiano Deutsch N eder lands Español Fr anç ais English Switching the SOLO Function and the LEAD and JC CLEAN Channels You can use the [SELECT] switch and the SOLO [ON/OFF] switch to switch between the following four sounds • Current JC CLEAN panel settings • The SOLO sound you create...
Page 15 - Using the LOOPER; Recording a Phrase; Playing back the phrase
14 Using the LOOPER This function lets you record a phrase you perform, and then play it back repeatedly. You can also overdub additional phrases onto the recording.On the CUBE-40XL and CUBE-80XL, this is called the Looper function.You can also operate the LOOPER function using optional foot switche...
Page 16 - Using the LOOPER Function and Delay at the; Copyright
15 Por tuguês Italiano Deutsch N eder lands Español Fr anç ais English Using the LOOPER Function and Delay at the Same Time By taking advantage of the SOLO function, you can use the Looper function and the delay at the same time.Normally, you cannot use the delay when the [DELAY/LOOPER] knob is in t...
Page 17 - Sample Settings; Extreme; Space Clean; Surf Line
16 Sample Settings * For information on how to set the delay time, refer to “DELAY/LOOPER” (p. 6) Extreme [SELECT] switch=LEAD CUBE-40XL CUBE-80XL [SELECT] switch=LEAD This is an extreme sound with intense distortion. This is a high-gain sound that packs a lot of punch in the low end, while deliveri...
Page 18 - Rockabilly Slap; Loud Metal; Dynamic Style
17 Por tuguês Italiano Deutsch N eder lands Español Fr anç ais English Rockabilly Slap Delay time = approx. 90 ms (reference) [SELECT] switch=LEAD CUBE-40XL CUBE-80XL Delay time = approx. 90 ms (reference) [SELECT] switch=LEAD This is the slapback-echo sound used in rockabilly and country. The BLACK...
Page 20 - Specifications
19 Por tuguês Italiano Deutsch N eder lands Español Fr anç ais English CUBE-40XL/CUBE-80XL: Guitar Amplifier CUBE-40XL CUBE-80XL Rated Power Output 40 W 80 W Nominal Input Level (@ 1 kHz) INPUT: -10 dBu/ 1 MΩ INPUT: -10 dBu/1 MΩ AUX IN: -10 dBu AUX IN: -10 dBu Speaker 25 cm (10 inches) 30 cm (12 inc...
Page 22 - Information
Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. AFRICA EGYPT Al Fanny Trading Offi ce 9, EBN Hagar Al Askalany Street, ARD E1 Golf, Heliopolis, Cairo 11341, EGYPT TEL: (022)-417-1828 REUNION MARCEL FO-...
Page 24 - NOTICE; FEDERAL COMMUNICATIONS COMMISSION; WARNING
This product complies with the requirements of EMCD 2004/108/EC and LVD 2006/95/EC. For EU Countries For Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règ...
Page 26 - IMPORTANT SAFETY INSTRUCTIONS
CAUTION 5,6.2)(/(&75,&6+2&. '212723(1 $77(17,21 5,648('(&+2&(/(&75,48(1(3$62895,5 CAUTION 725('8&(7+(5,6.2)(/(&75,&6+2&. '21275(029(&29(525%$&. 1286(56(59,&($%/(3$576,16,'( 5()(56(59,&,1*7248$/,),('6(59,&(3(56211(/ 7KH OLJKWQLQJ IODVK ZLWK ...
