RocketFish RF-GPS31104 - Manual
RocketFish RF-GPS31104 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Congratulations on your purchase of the
RF-GPS31104
wireless headset.
This headset represents the state of the art in wireless headset design and
is designed for reliable and trouble-free performance.
Package contents
• Wireless headset
• Charger
• Quick Setup Guide
Product features
Charging the battery
Peel off the protective plastic film on the front of the headset, then charge
the headset before using.
• Connect the smaller end of the micro USB cable (included) to the
opening on the end of the headset. To connect the cable to a power
source, either connect the larger end of the cable to a USB port on
your computer, or to the included wall adapter, which you then plug
into a wall outlet. If you charge with your computer, make sure the
computer is powered on. While the battery is charging, the indicator
lights red. When the battery is fully charged, the indicator lights
yellow-green.
Note:
Charge the headset with attached USB cable and provided wall
charger only.
RF-GPS31104
Turning the headset on and off
1
To turn on the headset, press and hold the power button for about
two seconds. The headset beeps and the indicator blinks yellow-green.
2
To turn off the headset, press and hold the power button for about
four seconds. The headset beeps and the indicator briefly lights red.
“Pairing” Your headset
Your new Rocketfish Bluetooth wireless headset needs to be paired to your PS3
Turn your PS3 off on the back for about 10 seconds and then back on.
Power on your PS3 console with the touch power button on the front of
the PS3.
Find the
Settings
menu and press
X
on
Accessory Settings
.
Press
X
on the icon labeled:
Register Bluetooth® Device
.
Scroll down and press
X
on the icon labeled
Manage Bluetooth Devices.
Select
Yes
to register a new device (if this is the first time registering a
Bluetooth device) then press
X
on
Start Scanning
.
Now prepare your Rocketfish Bluetooth wireless headset to be paired with
the PS3 by holding down the
Power/Send/End button
(the entire top
area) on the Rocketfish Bluetooth wireless headset for about 8 seconds.
The LED on the device will start flashing a continuous green.
Once scan is complete, the PS3 will recognize all Bluetooth devices within
QUICK SETUP GUIDE
Wireless Headset
Power/Send/End button
Indicator light
Charger connector
Volume down
Volume up
Earpiece
Ear loop
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
