Robomow RX20 (Up to 1/20 Acre) - User Manual

8 9 G. Maintenance and special instructions 1. Always switch the mower off and remove the Disabling Device before clearing blockage/ checking/cleaning/working on it, or after striking a foreign object to inspect the machine for damage. Never attempt to service or adjust the mower while it is in oper...

8 9 H. Product end of use 1. The mower and its accessories should be collected separately at the end of their life to prevent waste electrical and electronic equipment from ending up in landfill sites, and to protect and improve the quality of the environment. 2. Do not dispose of the mower or any o...

10 11 WARNING! Your mower is equipped with numerous built-in safety features. However, the mower is a hazardous device with a sharp blade, which can cause major injury to anyone who comes in contact with it. Therefore, it is absolutely forbidden to be on the lawn while the mower is working. Alternat...

10 11 D. Tilt Sensor If the mower is tilted up towards a vertical position, the blade will stop immediately. E. Obstruction Sensor Your mower detects interfering obstacles in its way during operation. When the mower collides with an obstacle, it will stop the rotation of the blade immediately, will ...

12 13 Installation Congratulations on purchasing your new mower! Your new mower will move randomly within its working area, as defined by the Perimeter Wire. This kind of random movement provides the perfect cut and ensures complete coverage of your lawn. At the end of each mowing ride, your mower w...

14 15 So where are we heading? Get started Choose Base Station location Lay the wire Wire your lawn Power up Connect Everything GO! Your mower is ready Set base Install the Base Station Correct installation of your mower will ensure maximum results. This is what it takes to prepare it to do a perfec...

16 17 The Base Station is where your mower recharges, and where the Perimeter Wire starts and ends. Follow these simple guidelines to find a proper location for your Base Station Get started Up to 10 meters / 33 feet away from a power outlet A min. of 1 meter / 3.3 feet straight wire before and afte...

18 19 Lay the Perimeter Wire (“virtual boundary”),which defines the working area for the mower. Lay the wire Combination pliers • Have mower’s package nearby.• Before you start wiring, use your old mower to cut your grass to the height no more than 6 cm (2.5”) one last time. This will make inserting...

22 23 TIP Well done! This was the most complex part of the wire installation. Let’s move on… SLOPES Slopes along the edge To ensure your mower doesn’t slip off the lawn, especially when the grass is wet, the Perimeter Wire must exclude a slope along the edge of your lawn with an incline of over 10% ...

22 23 • The Perimeter Wire is secured to the ground by the pegs supplied with the product. • Pull the wire tight while hammering the pegs to their final depth in the ground. • Take care not to damage irrigation pipes. • Place the pegs every few tens of centimeters. • Add pegs where necessary to keep...

OR If your lawn has additional areas as shown below, see Appendix B. 24 25 D. Protect obstacles Hard obstacles Obstacles that are vertical, rigid and higher than 15 cm (6 in), such as trees or telephone poles, do not need to be protected by the Perimeter Wire. The mower will bump into them and turn ...

24 25 F. Complete wire setup • Arrive back to the base location until the two wire ends meet each other • Put the last peg very close to the first one

26 27 Set base 3 • Place the Base Station in its planned location• Properly align the center of the Base Station with the Perimeter Wire • Fix the base to the ground with the 4 supplied metal stakes Be careful not to damage irrigtion pipes when hammering down the stakes.

32 33 Well Done! Now relax, and let your mower do the work.

32 33 Quick reference Knowing your mower Single-button operation Additional options with the mobile app Taking care of your mower Troubleshooting FAQs

34 35 In order to fully enjoy your mower, learn about its different parts and messages. Understanding how it works and interacts will lead to smooth and easy operation. Knowing your mower Front side Floating deck Carrying handle Front drive wheel Rear side Mowing height adjustment knob Operating pan...

34 35 Bottom view Floating mowing deck Rugged drive wheels Mowing blade Glider surface

36 37 Operating panel STOP / Home button Lock indication: Steady orange: child protection is active Blinking orange: theft protection is active ON-OFF indication: Steady green: mower is switched on / mower is in operation Blinking green: mower is returning to the Base Station / mower is driving to a...

38 39 Before anything else Single-button operation • Clean the lawn from stones, fallen branches or other foreign objects before using the mower. • Set the mowing height to the desired level. We recommend setting the mowing height to the maximum during the first mowing operation or at the beginning ...

40 41 Starting a mowing operation Starting a mowing operation is super easy! If you wish to start a regular mowing operation (up to 2 hours of continuous mowing), all you need to do is to press the GO button once. If the regular mowing duration is too long for your lawn, you can initiate a short mow...

42 43 Along with a totally exciting experience, it brings additional options and capabilities to your small and clever mower: • Setting automatic mowing schedule • Activating theft protection • Defining additional starting points • Remote controlling with manual mowing • Remote diagnostics by a serv...

42 43 Taking care of your mower Once a month: • Inspect the underside of the mower. Clean if necessary. Carefully scrape the collected grass debris (using a small stick or similar object) from under the mowing deck. • Check the Perimeter Wire and add pegs where it is loose and not tight to the groun...

44 45 Operating the Disabling Device • The Disabling Device prevents the operation of your mower when it is removed. • If the Disabling Device is pulled out, the current operation will be immediately halted, the Lock indication will blink three times and the ON/OFF LED will switch off. • If any butt...

46 47 Winter storage The mower • Charge the mower fully in its base • Switch it off by pressing the GO button for 2 seconds • Store in dry indoor conditions at ambient temperatures above 0˚C. Base Station • No winter storage is required for a Base Station. It can be left on the lawn during the winte...

46 47 Battery replacement 1. Make sure the mower is not in the Base Station.2. Power the mower off by pressing GO button for 2 seconds.3. Remove the Disabling Device.4. Ensure that only a replacement battery of the right type (Part No. MRK9101A) is used. 5. Warning! Do not use a non-rechargeable bat...

No. of beeps ON-OFF indication Meaning Corrective action • Blinking red Mower crossed outside / mower is stuck in place / lift event detected/ wrong wire connection • Check that the Perimeter Wire is not too close to the edge or not on a sloped area. • Move the mower inside the lawn or away from thi...

Special indications Indication Meaning Periodic beeps + ON/OFF LED is red The mower has been lifted or tilted up. Error sound + Battery LED blinks red two times Mowing attempt while the battery is low. Need to recharge battery first. Error sound + Lock LED blinks two times Mowing attempt while child...

54 55 Requires configuring starting points via the a pp (not applicable for models under 2 00 m 2 / 2150 ft 2 ) Appendix B Secondary areas Connected secondary areas If your lawn has additional areas connected with a passage and the mower is able to drive through it, then you should bear in mind the ...

54 55 What to do Switch ON/OFF Send the mower to the Base Station Blinking green: The mower is charging in the Base Station. Blinking red: There is a fault; go to the“Troubleshooting” section of this guide or connect with the mobile app for more information. Blinking red fast: The perimeter wire is ...