Robinhood ICSMK - User Manual
Robinhood ICSMK Ironing System – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Surface Mounting Kit Assembly to IC1300 Ironing Centre
- Page 3 – Monaco Corporation Ltd
- Page 4 – Australia; Shriro Australia Pty Ltd
1
Description:
ROBINHOOD IRONING CENTRE SURFACE MOUNTING KIT
Model Numbers:
ICSMK
Thank you for purchasing a quality Robinhood ironing surface mounting kit. This kit is designed to fit a surface
mounted IC1300 Ironing Centre.
Important:
o
Please read the entire instructions before installing the ironing centre/surface mounting kit.
o
Please allow 100mm clear area on either side of ironing centre for surface mounting kit installation.
o
(Alternatively install surface mounting kit to Ironing Centre before installing to the wall)
o
Should you be fitting a door to the enclosure holding this product, please be mindful of the position of all door
furniture (hinges, handles etc). Specifically ensure the board will operate without obstruction.
o
Do not place EXCESSIVE WEIGHT (weight should not exceed 15kg) on the ironing board when opened, as it is
designed to only accept normal ironing use only.
o
The product is not intended for use by small children or infirm persons without supervision.
Contents of packaging:
2 x collar sides (A)
1 x collar top (B)
1 x collar bottom (C)
1 x instructions
1 x packet of fasteners
- 2 x edge covers(D), 8 x small screws size 6” x ¼”(E), 6 x large screws size 8” x ¾”(F), 1 x edge saddle (G)
Pre-installation
Collar Kit Assembly
ICSMK
Issue: 3
Typical equipment required:
o
electric drill
o
screwdriver
o
tape measure
o
spirit level
A
B
C
D
E
F
G
DIAGRAM 1
EDGE COVER
POSITION
REAR VIEW
IC1300
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Surface Mounting Kit Assembly to IC1300 Ironing Centre Note - this kit is interchangeable to allow the power cord to exit at either the top or bottom of the unit. Just swap part (B) with part (C) during installation and take note of power cord route. Follow the Ironing Centre installation instruct...
3 Warranty Certificate (New Zealand) Terms and Conditions The following conditions apply in respect of the warranty given in this certificate: 1. Monaco Corporation Limited (“Monaco”) warrants the following Robinhood products against manufacturing defects and faulty materials, under normal use and s...
4 Warranty Certificate (Australia) ECN: 07034 Terms and Conditions If you are a consumer under the Australian Consumer Law, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation f...