Rinnai RSE1S35SP - User Manual
Rinnai RSE1S35SP Heater – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
1
HVAC Guideline Specifications
SE Series
Packaged High Intensity Infrared Radiant Gas Heater
Outdoor/Indoor Commercial/Industrial Applications
Size Range:
35,000 and 50,000 Btuh Input Rating
Models:
Description
Part # NG
Part # LPG Input (Btuh)
RSE1S35BP/N
RSE1S35SP/N
S/S Enclosure; Aluminum Egg Crate
screen
RSE1S35BN
RSE1S35BP
35,000
RSE1S50BP/N
RSE1S50SP/N
S/S Screen; Aluminized Covers
RSE1S50BN
RSE1S50BP
50,000
Part 1
— General
1.01 SYSTEM DESCRIPTION
Outdoor / Indoor approved overhead mounted, electrically controlled patio and high intensity infrared
radiant heating unit utilizing gas combustion as supplied by Rinnai.
1.02 QUALITY ASSURANCE
A. Heater will be tested, approved, and certified by CSA International in accordance with ANSI
Z83.19b / CSA 2.35b High Intensity Gas-Fired Heaters (indoor use), and additionally in
accordance with ANSI Z83.26 / CSA 2.37 Outdoor Gas-Fired Patio Heaters (outdoor use).
B. Each heater will be subjected to run testing on the assembly line.
C. The heater will be warranted by the manufacturer for defects in material and workmanship for a
period of 3 years on the burner assembly and ceramic tiles that comprise the burner panel, and 1
year on all other parts and components.
1.03 DELIVERY, STORAGE, AND HANDLING
Heate
r will be stored to secure against damage and handled per manufacturer’s recommendations.
Part 2
— Product
2.01 EQUIPMENT (STANDARD)
A. General:
Factory assembled, single-piece infrared radiant heating unit for overhead mounted patio, space or
area heating application. Supplied with the heater will be all necessary factory installed wiring,
piping, and controls required prior to field installation and start -up.
B. Heater Enclosure Construction:
a.
Exterior sheet metal enclosure components, and a ll interior sheet metal components
exposed to direct heat from the burner will be constructed of 409 grade stainless steel.
b.
An interior sheet metal divider in the control compartment, and control mounting bracket
will be constructed of high grade aluminize d steel.
c.
All exposed surfaces of exterior sheet metal components will have a coating of high
temperature flat black emissive coating.
C. Burner Construction and Emitting Surface:
1. General:
a.
Burner body will be constructed of high grade aluminized steel
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
