Rinnai EHFA250S36 - User Manual
Rinnai EHFA250S36 Hot Water System – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – This page is intentionally blank
- Page 3 – TABLE OF CONTENTS; Important Information; To fill & turn ‘ON’ the water heater; Contacts
- Page 5 – REGULATORY; with the manufacturer’s instructions.
- Page 6 – SAFETY; Thisapplianceis; To meet regulatory requirements the temperature of stored water; MUST NOT; be less than 60°C� The thermostat; suitablyqualifiedtradesperson.; DANGER BEWARE OF
- Page 7 – SAFETY DEVICES; and an over-temperature cut out for each heating element�; DO NOT; inspection by a qualified person.; Gently lift lever
- Page 8 – ANODE; Single Element Model:; Turning Water Heating System ‘OFF’; is available�; DRAINING; Draining; in the water heater�; IMPORTANT INFORMATION
- Page 9 – SAVE A SERVICE CALL; you still require assistance; PERIODIC MAINTENANCE & SERVICING; inspected and serviced by a qualified person every 12 months.; MUST BE; replaced by a qualified person in order
- Page 10 – APPLIANCE COMPONENTS; Copper only drain in accordance with AS/NZS 3500.4; Removalandconnectionbyqualifiedpersons; SPECIFICATIONS
- Page 11 – All dimensions are in mm unless otherwise stated; APLVisnotsuppliedwiththesemodels.APLV
- Page 12 – HOT WATER PLUMBING SYSTEM EXAMPLE - NO TLD; as shown�; INSTALLATION METHODS
- Page 13 – HOT WATER PLUMBING SYSTEM EXAMPLE / FLOW & RETURN PIPE WORK - NO TLD
- Page 14 – installed by a qualified person in accordance with:; LOCATION; fitted on the cold water line between the non‐return valve and the; MAINS PRESSURE; INSTALLATION
- Page 15 – THERMOSTAT SETTING; MUST ONLY; fitted in the cold water supply to the water heater so the water; Water Pipes
- Page 17 – ELECTRICAL SUPPLY; A water heater; Electrical Connections; Isolate all
- Page 18 – have the thermostat preset to 70°C�; Ensurethepowersupplyisswitched; TWIN ELEMENT; Earth; Earth
- Page 19 – Commissioning activities; COMMISSIONING
- Page 20 – CONTACTS; Head Office
This Appliance complies
with cusrrent AS 3498
SAI GLOBAL LIC. WMKA00169
This appliance must be installed in accordance with:
• Manufacturer’s Installation Instructions
• Current AS/NZS 3000 Wiring Rules
• Municipal Building Codes
• Current AS/NZS 3500.4 Plumbing and Drainage - Heated Water Services
• All local regulatory requirements, including all local OH&S requirements
This appliance must be installed, maintained and removed by a Qualified Person.
For continued safety of this appliance it must be installed and maintained in
accordance with the manufacturers instructions.
Installation Manual
HOTFLO (EHFA/EHFD) Series
Mains Pressure Vitreous Enamel
Electric Storage Water Heater
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Rinnai 2 EHFA/EHFD HW IM This page is intentionally blank
Rinnai 3 EHFA/EHFD HW IM TABLE OF CONTENTS Warnings & Safety 5 Regulatory ����������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 5Notice To Victorian Consumers �����������������...
Rinnai 5 EHFA/EHFD HW IM READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. Always comply with the following precautions to avoid dangerous situations and to ensure optimum performance.Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property d...
