Rinnai EHF400T48 - User Manual
Rinnai EHF400T48 Hot Water Storage – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; Important Information
- Page 3 – REGULATORY; with the manufacturer’s instructions.
- Page 4 – SAFETY; Thisapplianceis; To meet regulatory requirements the temperature of stored water; MUST NOT; be less than 60°C� The thermostat; suitablyqualifiedtradesperson.; DANGER BEWARE OF
- Page 5 – SAFETY DEVICES; and an over-temperature cut out for each heating element�; DO NOT; inspection by a qualified person.; Gently lift lever
- Page 6 – ANODE; Single Element Model:; Turning Water Heating System ‘OFF’; is available�; DRAINING; Draining; in the water heater�; IMPORTANT INFORMATION
- Page 7 – SAVE A SERVICE CALL; you still require assistance; PERIODIC MAINTENANCE & SERVICING; inspected and serviced by a qualified person every 12 months.; MUST BE; replaced by a qualified person in order
- Page 8 – APPLIANCE COMPONENTS; Removalandconnectionbyqualifiedpersons; SPECIFICATIONS
- Page 9 – INLETS; Plumbing connections are duplicated
- Page 11 – INSTALLATION METHODS
- Page 12 – HOT WATER PLUMBING SYSTEM EXAMPLE WITH FLOW & RETURN PIPE WORK
- Page 13 – HOT WATER PLUMBING SYSTEM EXAMPLE WITH FLOW & RETURN PIPE WORK & TLD
- Page 14 – installed by a qualified person in accordance with:; LOCATION; fitted on the cold water line between the non‐return valve and the; MAINS PRESSURE; INSTALLATION
- Page 15 – THERMOSTAT SETTING; MUST ONLY; fitted in the cold water supply to the water heater so the water; Water Pipes
- Page 16 – Pressure and Temperature Relief (PTR) Valve
- Page 17 – ELECTRICAL SUPPLY; A water heater; Electrical Connections
- Page 18 – Wiring Diagrams; be set at 65°C, this temperature is sufficient for most users.; Ensurethepowersupplyisswitched; TWIN ELEMENT; Earth
- Page 19 – Commissioning activities; COMMISSIONING
- Page 20 – CONTACTS; Product Sales & Service National Help Line
This appliance shall be installed in accordance with:
• Manufacturer’s Installation Instructions
• Municipal Building Codes
• AS/NZS 3000 Wiring Rules
• AS/NZS 3500.4 Plumbing and Drainage
• Any other local relevant Statutory Regulation
• All local regulatory requirements, including all local OH&S requirements
This appliance must be installed, maintained and removed only by a Qualified Person.
For continued safety of this appliance it must be installed and maintained in
accordance with the manufacturers instructions.
AS3498 Lic WMKA 21244
Operation & Installation Manual
‘HOTFLO
®
’ (HFE Series)
Mains Pressure Vitreous Enamel
Electric Storage Water Heater
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Rinnai 2 HOTFLO (HFE Series) Electric Storage Water Heater OIM TABLE OF CONTENTS Warnings & Safety 3 Regulatory ����������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 3Notice To...
Rinnai 3 HOTFLO (HFE Series) Electric Storage Water Heater OIM READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. Always comply with the following precautions to avoid dangerous situations and to ensure optimum performance.Failure to carefully read and follow all instructions in this manual can resul...
Rinnai 4 HOTFLO (HFE Series) Electric Storage Water Heater OIM SAFETY WARNING Thisapplianceis NOT intendedforusebypersons(includingchildren)withreducedphysical, sensoryormentalcapabilities,orlackofexperienceandknowledgeunlesstheyhavebeengiven supervision or instruction concerning use of the applianc...
