Ricoh AP400N - Manual

Replace Maintenance Kit 4 1 Preparing to replace the parts You should replace all the parts included in Maintenance Kit at the same time.Be sure to replace them in the following order: AAAA Check the contents of the box for the following items: • Friction pad• Paper feed roller• Transfer roller• Fus...

Replacing Parts 5 1 Replacing Parts Replacing the Friction Pad Replace all the friction pads in thetray. The following procedure showshow to replace the tray's friction pad(Tray1). AAAA Pull out the paper tray until it stops. BBBB While lifting the front side of thetray, pull it out of the printer. ...

Replace Maintenance Kit 6 1 EEEE Return the paper tray to its origi-nal position, and remove the fric-tion pad from the tray. Note ❒ The friction pad spring maycome off. Be careful the springd o e s n o t f al l o f f a n d be c o m elost. FFFF Insert the new friction pad in thepaper tray. Attach th...

Replacing Parts 7 1 Important ❒ Be sure to move the printer hor-izontally. Moving the printerfacing up on down may causethe toner to scatter. ❒ Do not put the printer on an un-stable or tilted surface. Note ❒ If the printer is equipped withthe optional Paper Feed Unit,do not move the printer and the...

Replace Maintenance Kit 8 1 Replacing the Transfer Roller AAAA While holding the front coverwith both hands on the left andright sides, press the release but-ton to open it. BBBB Pull the toner cartridge out of thep r in te r, w h i le li ft in g t h e fr o n tside. Note ❒ Be sure to place the used ...

Replacing Parts 9 1 Important ❒ Do not insert the roller on theback of the socket, or the printermight be damaged. ❒ Insert the metallic part of theroller on the socket. If you insertthe sponge part of the roller, theroller might be damaged. GGGG Push down the green parts ofboth sides of th e r olle...

Replace Maintenance Kit 10 1 Replacing the Fusing Unit R CAUTION: AAAA If the rear cover is attached to theprinter, remove it. Note ❒ Proceed to step B if the optional Duplex Unit was rem oved inste p A , "R ep lacing the Paper Feed Rollers". A Place a finger in the printer'srear cover finge...

Replacing Parts 11 1 EEEE Replace the new fusing unit intothe printer. FFFF Push the lock levers of the fusingunit down until it clicks. GGGG Reinstall the rear cover removedin step AAAA . Note ❒ Proceed to step H if the optional Duplex Unit was rem oved inste p A , "R ep lacing the Paper Feed R...

12 INDEX F friction pad , 5 fusing unit , 10 P paper feed roller , 6 T transfer roller , 8 CassisP1GBmaintenance-F2_FM.book Page 12 Friday, May 23, 2003 10:04 AM

Paper type: Wood Free 80g/m2, Paper Thickness=100 µ m // Pages in book=16 // Print scale=81% Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 0 mm MAINTENANCE KIT Type 400 Operating Instructions Printed in China GB GB EN USA G830-8600