Rheem RGGE- User Manual
Rheem RGGE– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS
- Page 3 – STANDARD EQUIPMENT; WA R N I N G; THIS FURNACE IS NOT APPROVED
- Page 4 – The; Comfort Control; Features of the RGGE Series:
- Page 5 – Physical Data and Specifications—Downflow Models
- Page 6 – Model Number Identification
- Page 7 – Dimensional Data
- Page 8 – Blower Performance Data
- Page 9 – (Available through PROSTOCK; programming; THERMOSTATS; RECOMMENDED MODULATING FURNACE THERMOSTAT; PLENUM DATA FOR “A” COILS; HORIZONTAL TWO PIPE:
- Page 10 – RGGE HIGH ALTITUDE FIELD CONVERSION KITS:
- Page 11 – GENERAL TERMS OF LIMITED WARRANT Y*
Rheem
Prestige Series
™
Communicating
Modulating Downflow Gas Furnace
equipped with the
Comfort Control
2
System
FORM NO. G11-528
RGGE- Series
A.F.U.E. up to 92.3%
Input Rates from 60-120 kBTU
[17.58 to 35.16 kW]
With
Contour Comfort Control
®
✝
A.F.U.E. (Annual Fuel Utilization Efficiency) calculated in accordance with
Department of Energy test procedures.
• The Rheem
Prestige Series
™
90 Plus High Efficiency line of
downflow gas furnaces are designed for utility rooms, closets, or
alcoves, attics or crawl spaces. The design is certified by CSA.
• The
Comfort Control
2
System™
provides 28 on-board
diagnostic and fault history codes on a dual 7-segment LED
display, by detecting system and electrical problems. A “Call
for Service” alert notification is sent via the thermostat to the
homeowner for required service.
• Serial Communication Enhanced – When installed with a
Serial Com muni cat ing Condensing Unit and user interface
control (RHC-TST550CMMS) 500 Series thermostat this unit
offers 4 or 2 wire installation, auto-configuration, and diag-
nostic messaging with full communicating capability.
• Heat exchanger is constructed of all stainless steel for maxi-
mum corrosion resistance and thermal fatigue reliability.
• Modulating Function: when used with a modulating or com-
municating thermostat, modulation rate between 40% and
100% of total capacity.
• Two-stage Function: when used with a two-stage thermostat,
furnace operates at 40% on first stage, and stages up to
65%, then 100% for second stage.
• Multistage Function: when used with a single-stage thermo-
stat, furnace functions as a three stage furnace operating at
40%, 65% and 100% of total capacity.
• Reduced firing rates, electrically efficient ECM2+ motor, and
solid doors provide the ultimate in quiet operation.
• Low speed constant fan.
• Constant temperature rise for superior comfort.
• Seven segment LED for system diagnostics.
• Diagnostic history for troubleshooting.
• Two-speed induced draft motor.
• Direct spark ignition with remote sense.
• Top electrical connections, left or right gas and condensate
drainage connections on downflow models.
• Optional indoor or outdoor combustion air.
• A variety of cooling coils and plenums designed to use with
the Rheem
Prestige Series
™
90 Plus gas furnaces are avail-
able as optional accessories.
Air
Gas Furnaces
RGGE Series
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Air Table of Contents RGGE Series 2 TABLE OF CONTENTS Standard & Optional Equipment ......................................................................3 Model Features ..............................................................................................4 Physical Data & Specifica...
Air Standard & Optional Equipment RGGE Series 3 STANDARD EQUIPMENT Completely assembled and wired; heat exchanger; primary:409 and aluminized 409 stainless steel, secondary: 29-4Cstainless steel; induced draft; pressure switches; redundantmodulating main gas control; blower compartment door safe...
Air Model Features RGGE Series 4 n The Rheem Dual 7-Segment LED Display easily shows system operating status codes and diagnostic codes. n The Status Indication System Diagnostics feature thermostat com-munication capability andbuilt-in diagnostics. The thermostat communicationcapability and alerts ...