Revolabs 07-stemic-ppp - Manual
Revolabs 07-stemic-ppp – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Rev 1.1 10/07
L
L
L
Line
ine
ine
ine----to
to
to
to----Mic Conver ter
Mic Conver ter
Mic Conver ter
Mic Conver ter
Users Guide
Users Guide
Users Guide
Users Guide
The Revolabs Solo™ Line-to-Mic Converter cable is designed to facilitate Revolabs system installations
requiring attenuation from line level to microphone level as found on many videoconferencing systems
and audio mixers. The cable also blocks phantom power bias voltages up to 48V.
To use the Line-to-Microphone level converter cable:
Step One:
Plug the 2.5mm mini-plug into the Solo Executive Single Channel analog line level input.
Step Two:
Insert the XLR Male connector to a microphone-level (-40dB) input channel on the audio mixer or
video codec.
Step Three:
If desired, use the return audio RCA Female connector to monitor audio from the mixer / video
codec through an earpiece connected to the microphone.
Cable Specifications
Length
: 6 Ft (1.8m)
Connectors
: 2.5mm Male mini-plug, RCA Female, XLR Male with
Phantom-blocking 40 dB signal attenuation circuit
Model
: 07-STEMIC-PPP
Warranty
Revolabs, Inc. warrants this product to be free of manufacturing defects. Repair or replacement of any defective
part or unit (at the discretion of the Seller) will be free of charge for a period of 90 days after purchase.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
