Remington Side-By-Side Cocking Hammer Shotgun - Manual

Page 2 - Safety is Critical to Performance.; s t C O M M A N D M E N T; Always Keep the Muzzle Pointed in a Safe Direction.; n d C O M M A N D M E N T

2 3 2 Safety is Critical to Performance. A superbly crafted gun is only as good as the hands that hold it. You can never be too careful. Shooting accidents are often caused by careless oversights such as failing to control the direction of the muzzle, failing to fully engage the safety, leaving ammu...

Page 3 - Know Your Target and What’s Beyond It.; Use Proper Ammunition.; t h C O M M A N D M E N T

3 3 3 r d C O M M A N D M E N T Never Rely on Your Firearm’s Safety Mechanism to Justify Careless Handling. If your firearm is equipped with a manual safety mechanism , do not rely on the safety as an excuse for improp- er or careless handling of the firearm. The safety mechanism is merely a supplem...

Page 4 - Always Wear Eye and Ear Protection.; t h C O M M A N D M E N T; Be Sure the Barrel is Clear of Obstructions Before Shooting.; t h C O M M A N D M E N T; Learn How Your Firearm Operates.; LEAD EXPOSURE WARNING

4 7 t h C O M M A N D M E N T Always Wear Eye and Ear Protection. Wear protective shooting glasses and hearing protection when shooting. Be sure to wear eye protection when disassembling or cleaning a firearm to protect your eyes from springs and other tensioned parts. Continued exposure to shooting...

Page 5 - Use the Security Lock Provided with your Shotgun; Pictures 1 and 2

5 Use the Security Lock Provided with your Shotgun This shotgun comes with a security lock to assist in protecting against unauthorized use. (See Picture 1A ). The shotgun must be unloaded when the security lock is in place on the shotgun. WARNING : Using the security lock cannot substitute for secu...

Page 6 - Use the Security Lock Provided with your Shotgun (cont’d); DO NOT TIGHTEN THE NUT TOO TIGHT OR YOU COULD DAMAGE THE LOCK SCREW

7 6 Use the Security Lock Provided with your Shotgun (cont’d) 3. Screw the Trigger Lock Nut on the Trigger Lock Screw (clockwise) and tighten the nut with the key. DO NOT TIGHTEN THE NUT TOO TIGHT OR YOU COULD DAMAGE THE LOCK SCREW (See Picture 4 ). 4. To remove the Trigger Lock, unscrew the Trigger...

Page 7 - Important Parts of the Firearm; External Control Parts; Picture 6

7 Important Parts of the Firearm Congratulations on your choice of a Remington ® Model 220H Side-By-Side Cocking Hammer shotgun. With proper care and if used in accordance with the Ten Commandments of Firearm’s Safety and this owner’s manual, your shotgun should give you many years of dependable use...

Page 8 - Picture 9

8 External Control Parts (cont’d) Top Lever: The top lever is located just forward of the safety mechanism. (See Picture 8 ). The top lever is used to break open the action to load and/or unload the shotgun, and to assemble and disassemble the shotgun. To break open the action, fully push the top le...

Page 10 - Instructions For Assembly Of Shotgun

10 Instructions For Assembly Of Shotgun WARNING Before you begin to assemble the shotgun, you MUST (1) look down the barrel from the breech end toward the muzzle end to make sure there is no ammunition in the chambers or obstruction in the barrels, and (2) make sure the safety is in the “safe” posit...

Page 12 - Loading and Unloading Your Shotgun (cont’d)

Loading and Unloading Your Shotgun (cont’d) TO LOAD: 1. Make sure the ammunition that you are using is the correct size and gauge. The barrels are marked with the gauge and chamber size. Barrels marked 3” (76mm) will use only 2 3 / 4 ” (70mm) or 3”(76mm) shot shells and must not be used with 3 1 / 2...

Page 14 - Cocking and Uncocking Your Shotgun (cont’d); Firing Your Shotgun

Cocking and Uncocking Your Shotgun (cont’d) TO UNCOCK: 1. While holding the shotgun firmly by the stock’s pistol grip, break open the shotgun by using the top lever. Remove any live rounds (see Unloading Procedures). (See Pictures 25A and 25B ). Repeat this step with the other trigger. 2. With the s...

Page 16 - Instructions For Disassembly Of The Shotgun; FOLLOW UNLOADING INSTRUCTIONS

17 Instructions For Disassembly Of The Shotgun 1. Make sure the shotgun is unloaded ( FOLLOW UNLOADING INSTRUCTIONS ) and pointed in a safe direction. 2. Make sure the trigger block safety is engaged in the “on” or “safe” position. (See Picture 30 ). 3. Remove the fore end from the barrel by pulling...

Page 17 - Manufacturer’s Warning; THE GUN OWNER MUST ACCEPT FULL; To Clean and Maintain Your Shotgun; USE CAUTION

17 Manufacturer’s Warning This firearm was manufactured to properly perform with the original parts as designed. It is your duty to make sure any parts you buy are correctly installed and that neither replacements nor originals are altered or changed. Your shotgun has many parts that must relate cor...

Page 19 - One Year Limited Warranty; Implied Warranty; Your Owner’s Manual

PARTS AND SERVICE (cont’d) One Year Limited Warranty Transportation to and from our repair facilities, government fees, damage caused by failure to perform normal maintenance, sales outside the United States, damage caused by use of high velocity, high pressure, reloaded or other nonstandard ammunit...

Page 20 - Choke Tubes; Screw in Chokes Symbols/Markings; MAKE SURE YOU FULLY TIGHTEN THE CHOKE TUBE.; Additional Information On Screw Choke Tubes:

21 Choke Tubes WARNING Never install or remove choke tubes while the firearm is loaded. Only install or remove choke tubes with the firearm unloaded, the action open and the trigger block safely engaged. Screw in Chokes Symbols/Markings (This is an option – not all Model 100 shotguns have this featu...

Page 21 - Notes on Shot Material and Chokes:

21 Notes on Shot Material and Chokes: 1. Shells using Bismuth or Tungsten-Matrix shot are subject to the same barrel and choke tube limitations as lead shot. Shells using Tungsten-Iron shot or Hevi-Shot are subject to the same barrel and choke tube limitations as steel shot. 2. On fixed choke guns, ...

Page 22 - PARTS LIST

23 PARTS LIST Model 210/220 Exploded View 1. barrel assembly 29. cam pin 55. safety 2. stock swivel base 30. sear pin 56. screw 3. extractor pin 31. sear, LH 57. bush 4. woodscrew 32. left hammer base 58. screw 5. extractor 33. plug 59. plate, LH 6. screw 34. plug screw 60. plate, RH 7. swivel pin 3...

Remington Side-By-Side Cocking Hammer Shotgun - Manual

Table of Contents:

Summary

Other Remington Models