RCA WP4UWR - Manual

USB wall plate charger
WP4UWR/WP4UAR User’s Guide

The RCA USB wall plate charger turns any standard home dual AC

power outlet into a USB outlet in seconds, with fast, full-speed charging

for smartphones or tablets.
The 4 USB charging outlets support a wide range of USB-powered

portable devices. The outlets labeled 2.1 are optimized for devices that

require extra current, such as tablets. These outlets can output 2.1 Amps

of power.
The bottom 2.1 outlet is switchable, to support tablet products with

different charging circuitries. If you notice that your tablet is not

charging correctly on the top 2.1 outlet, follow the instructions below to

charge it on the switchable 2.1 outlet.
All four outlets support regular USB-powered devices, such as most

smartphones.

Using the Switchable 2.1 USB Outlet

The bottom 2.1 USB outlet

is switchable to support

the different charging

circuitries used by different

tablet manufacturers. This

outlet can charge smart

phones with non-standard

USB as well as tablets.

Before using this outlet, make sure you have the switch below this outlet

set to the right position for your device, as shown here. You must have it

set BEFORE you plug in your device. As a rule of thumb, leave this switch

in the B position unless you have an Apple (A) or Samsung (C) product.

Notes:

•

These are general guidelines for setting the switch—they might not work for all

models of all brands listed. If your device is still not charging correctly, unplug it

and try a different setting.

•

If your device does not start charging after plugged in, remove the USB cable

from the outlet. Set the switch to a different position and reinsert the USB cable

to the outlet. You may need to try all three positions.

A: Optimized for iPad and other Apple

products (except for iPod Classic and nano)

2.1

B: Works for most

other devices

C: Optimized for

Samsung tablets

©2012 Audiovox Accessories Corporation

A wholly-owned subsidiary of VOXX International Corporation

Indianapolis, IN

WP4UWR/WP4UAR US QSG 00

Limited Lifetime Warranty

Audiovox Accessories Corporation (the “Company”) warrants to you the original retail

purchaser of this product that should it, under normal use and conditions, be proven

defective in material or workmanship during its lifetime while you own it, such defect(s)

will be repaired or replaced (at the Company’s option) without charge for parts and

repair labor.To obtain repair or replacement within the terms of this Warranty, the

product is to be delivered with proof of warranty coverage (e.g. dated bill of sale),

specifi cation of defect(s), transportation prepaid, to the Company at the address shown

below. Do not return this product to the Retailer.This Warranty does not cover product

purchased, serviced or used outside the United States or Canada.This Warranty is

not transferable and does not extend to costs incurred for installation, removal or

reinstallation of the product. This Warranty does not apply if in the Company’s opinion,

the product has been damaged through alteration, improper installation, mishandling,

misuse, neglect, or accident. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS

WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND,

IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE

PAID BY PURCHASER FOR THE PRODUCT.This Warranty is in lieu of all other express

warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL

BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL THE COMPANY

BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER.

No person or representative is authorized to assume for the Company any liability

other than expressed herein in connection with the sale of this product.Some states/

provinces do not allow limitations on how long an implied warranty lasts or the

exclusion or limitation of incidental or consequential damage so the above limitations

or exclusions may not apply to you. This Warranty gives you specifi c legal rights and

you may also have other rights which vary from state/province to state/province.

U.S.A.:

Audiovox Return Center, 150 Marcus Blvd., Hauppauge,

New York 11788

CANADA

: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door 16,

Mississauga, Ontario L5T 3A5

•

The switch controls the bottom 2.1 outlet only. It does not control the other

charging outlets.

•

When this charger is providing maximum charging power (like with two fully

discharged tablets, four fully discharged phones), it is not unusual for the

outside case of the wall plate charger to become warm to the touch. This is

normal. You should not hold on to the case when it is warm, although it is safe

to touch.

Note about tablet charging:

This wall plate charger has 2 banks of 2 USB charging outlets each. Each bank

provides enough power for full-speed charging for 1 tablet or 2 smartphones. In

other words, the wall plate charger can provide full-speed charging for up to 2

tablets or 4 smartphones at the same time. For full-speed charging of tablets, you

should charge it by itself in its bank--you can still use the other bank for either a

single tablet or 2 smartphones, as shown here.

2.1

2.1

2.1

2.1

2.1

2.1

1 tablet and 2 smartphones

2 tablets

4 smartphones

Cargador de placa para pared
WP4UWR/WP4UAR Guía del Usuario

El cargador de placa para pared USB RCA convierte cualquier toma

de pared CA dual doméstica estándar en una toma USB en segundos,

proporcionando una carga rápida a toda velocidad para teléfonos

inteligentes o tabletas.
Las 4 tomas de carga USB soportan una amplia variedad de dispositivos

portátiles alimentados vía USB. Las tomas etiquetadas 2.1 están

optimizadas para dispositivos que requieran corriente extra, tales como

tabletas. Éstas tomas pueden dar salida a 2.1 Amperes de corriente.
La tabla 2.1 inferior es conmutable, para dar soporte a productos de

tabletas con diferentes circuitos de carga. Si usted nota que su tableta

no está cargando correctamente en la toma 2.1 superior, siga las

instrucciones a continuación para cargarla en la toma 2.1 conmutable.
Las cuatro tomas soportan dispositivos alimentados vía USB regulares,

tales como la mayor parte de los teléfonos inteligentes.

Uso de la toma USB 2.1 conmutable

La toma USB 2.1 inferior es

conmutable para soportar

los diferentes circuitos de

carga usados por diferentes

fabricantes de tabletas.

Esta toma puede cargar

teléfonos inteligentes con

USB no estándar así como

tabletas. Antes de usar esta

toma, asegúrese de que tenga el interruptor bajo esta toma establecido

en la posición correcta para su dispositivo, tal como se muestra aquí.

Esto debe ser efectuado ANTES de conectar su dispositivo. Como regla

general, deje este interruptor en la posición B a menos que usted tenga

un producto de la marca Apple (A) o Samsung (C).

Notas:

•

Estos son lineamientos generales para confi gurar el interruptor - pueden no

funcionar para todos los modelos de todas las marcas listadas. Si su dispositivo

aún no está cargando correctamente, desconéctelo e intente con una

confi guración diferente.

•

Si su dispositivo no comienza a cargar después de ser conectado, retire el

cable USB de la toma. Confi gure el interruptor para una posición diferente y

reinserte el cable USB en la toma. Puede ser que usted necesite intentar con

las tres posiciones.

•

El interruptor controla solamente la toma 2.1 inferior. No ejerce control sobre

las otras tomas de carga.

•

Cuando este cargador esté suministrando máxima potencia de carga

(como con dos tabletas completamente descargadas, cuatro teléfonos

completamente descargados), no es inusual que el estuche exterior del

cargador de placa de pared se caliente al toque. Esto es normal. Usted no

deberá sostener el estuche cuando esté caliente, aunque sea seguro tocarlo.

Nota acerca de la carga de una tableta:

Este cargador de placa de pared tiene 2 bancos de carga USB cada uno. Cada

banco proporciona sufi ciente corriente para carga a velocidad total para 1 tableta

o 2 teléfonos inteligentes. En otras palabras, el cargador de placa de pared puede

suministrar carga a toda velocidad hasta para 2 tabletas o 4 teléfonos inteligentes

al mismo tiempo. Para carga de máxima velocidad de tableta, usted deberá

cargarla en su banco-, y todavía puede usar el otro banco ya sea para una sola

tableta o 2 teléfonos inteligentes, como se muestra aquí.

2.1

2.1

2.1

2.1

2.1

2.1

1 tableta y 2 teléfonos

inteligentes

2 tabletas

4 teléfonos inteligentes

A: Optimized for iPad and other Apple

products (except for iPod Classic and nano)

2.1

B: Works for most

other devices

C: Optimized for

Samsung tablets

A: Optimizada para iPad y otros productos

Apple (excepto iPod Classic y nano)

C: Optimizada para

tabletas Samsung

B: Funciona para la

mayoría de los otros

dispositivos.