RCA WHR120RS - Manual

RCA WHR120RS

RCA WHR120RS – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 2 – • Transmits the stereo audio signal from your audio or video; FEATURES
  • Page 3 – ON THE IR STEREO TRANSMITTER (see figure 1 below); IR transmitting LEDs,to transmit the audio signal to the IR; Figure 1; ON THE STEREO HEADPHONE RECEIVER (see figure 2 below); the IR headphone; Figure 2; EXPLANATION OF CONTROLS
  • Page 4 – Figure 3; INSTALLATION
  • Page 5 – Figure 4; OPERATION; AAA SIZE BATTERY
  • Page 7 – Figure 5; IR TRANSMITTER
  • Page 8 – LIMITED 1 YEAR WARRANTY; SPECIFICATIONS
Loading the manual

Thank you for choosing RCA Wireless Headphones. You have selected
a fine product designed to provide years of performance. Before
attempting to use your Wireless Headphones, please remove all parts
from the box and read the installation and use instructions carefully.

STEREO INFRARED
HEADPHONE

Limited 1 Year Warranty

WHR120RS

wire

less

H E A D P H O N E S

WITH FLAT TRANSMITTER

WHR120RS_IB 7/3/02 8:49 AM Page 1

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - • Transmits the stereo audio signal from your audio or video; FEATURES

2 2 This infrared (IR) wireless headphone system transmits stereo soundsignals throughout the room allowing you to enjoy music or soundprivately from any audio or video device. With a range of up to 25feet, you may have freedom from wires while listening to your TV,video or audio CD in the same room...

Page 3 - ON THE IR STEREO TRANSMITTER (see figure 1 below); IR transmitting LEDs,to transmit the audio signal to the IR; Figure 1; ON THE STEREO HEADPHONE RECEIVER (see figure 2 below); the IR headphone; Figure 2; EXPLANATION OF CONTROLS

3 ON THE IR STEREO TRANSMITTER (see figure 1 below) 1. IR transmitting LEDs,to transmit the audio signal to the IR headphone 2. Power on/off switch3. DC input connector, to power the IR transmitter4. Recharge cable, to charge the batteries of IR headphone5. Input stereo audio signal cable with 3.5 m...

Page 4 - Figure 3; INSTALLATION

4 2. Insert the connector of the AC/DC adapter into the 12V DC input connector on the rear of the IR transmitter (see figure 3 above). 3. Plug the adapter into a 120 Volt wall outlet. 4. Remove the soft earpads from the earcups by gently lifting them up. They have plastic tabs that hold them in plac...

Other RCA Models