RCA Stereo Receiver with Remote Control - Manual

Page 2 - CONTENTS

2 CONTENTS Introduction .................................................................................................................................................................................... 3 The FCC Wants You To Know ......................................................................

Page 3 - THE FCC WANTS YOU TO KNOW

3 INTRODUCTION Your RCA 200 Watt Stereo Receiver operates as the perfect control center for your audio system. It combines 100 watts-per-channel of clean power with modern styling. It provides connections for one tape deck, a turntable, a CD player, and one other audio source, such as audio from a d...

Page 5 - PREPARATION; POSITIONING SPEAKERS

5 PREPARATION Caution: Make all the necessary connections before you plug in or turn on the receiver. POSITIONING SPEAKERS Speaker (not supplied) placement can make a noticeable difference in your system’s sound. The guidelines in this section will help you choose the best locations. After you use y...

Page 6 - CONNECTING PROGRAM SOURCES; CONNECTING THE ANTENNAS

6 3. Connect the ridged or color-coded conductor’s loose end to the speaker’s positive (+) terminal. 4. Connect the remaining loose conductor to the speaker’s negative (–) terminal. CONNECTING PROGRAM SOURCES Note: Use shielded audio cables with phono connectors for all audio connections. You can co...

Page 9 - OPERATION; USING THE SLEEP TIMER

9 OPERATION Warning: To prevent possible hearing loss, turn VOLUME to MIN before you turn on the receiver or change the program source. After you turn on the receiver or change the program source, adjust VOLUME to a comfortable listening level. You can use the supplied remote control by pointing it ...

Page 10 - TUNING THE RADIO; Manual and Automatic Tuning; Memory Tuning

10 TUNING THE RADIO Your receiver has four types of electronic tuning — manual, automatic, direct, and memory. Note: To listen to stations with weak signals, we recommend manual tuning. Manual and Automatic Tuning 1. Press FM or AM on the front panel (or on the remote control) to select the desired ...

Page 11 - ADJUSTING BALANCE; Listening Safely; CASSETTE DECK FEATURES; Using the Tape Monitor Button; USING THE RESET BUTTON

11 T T T Tu u u un n n niiiin n n ng g g g tttto o o o a S a S a S a Stttta a a attttiiiio o o on n n n iiiin n n n M M M Me e e em m m mo o o orrrry y y y 1. Press FM or AM on the front panel (or on the remote control) to select the desired band. The receiver tunes to that band and the last selecte...

Page 12 - TROUBLESHOOTING

12 TROUBLESHOOTING If the receiver is not working as it should, the following suggestions might help. If you follow the suggestions in this chart and the receiver still does not work properly, contact your local RadioShack store for assistance. Problem Cause Suggestion Power does not turn on. Power ...

Page 13 - CARE

13 CARE Keep the receiver dry; if it gets wet, wipe it dry immediately. Use and store the receiver only in normal temperature environments. Handle the receiver carefully; do not drop it. Keep the receiver away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new. Mod...

Page 14 - SPECIFICATIONS; Amplifier; FM Tuner

14 SPECIFICATIONS Amplifier Power Output ................................................................................................................................................. 100 Watts per Channel into 8 Ohms From 40 to 20,000 Hz, With No More than 0.5% Total Harmonic Distortion Measured...

Page 15 - NOTES

RCA Stereo Receiver with Remote Control - Manual

Table of Contents:

Summary

Other RCA Models