RCA RCU600M - Manual

Program for TV—Direct Entry Method Secondary Key Descriptions For AUDIO Operations In order for the six-component universal remote to control your TV, you mustprogram it with the TV code that matches your TV. These instructions explainthe preferred method of programming the remote—the Direct Entryme...

Program for VCR—Direct Entry Method 1. Manually turn on the VCR. 2. Locate the enclosed VCR Code List. Find your brand in the VCR Codes. Note : If your brand isn’t listed, use one of the Code Search methods to programthis remote control. (See section on Code Search on page 10). 3. Press and hold the...

6. Aim the remote at the component. Press the ON•OFF key. If your DVD/CD system turns off, you havefound the correct code. 7. Enter the code in the box provided on this page for future reference. 8. If your DVD/CD system does not turn off, repeat steps 3-6 above, entering thenext code for your brand...

1. Manually turn on the CABLE box. 2. Locate the enclosed CABLE box Code List. Find your brand in the CABLE box Codes. Note : If your brand isn’t listed, use one of the Code Search methods to programthis remote control. (See section onCode Search on page 10). 3. Press and hold the CODE SEARCH key un...

Operating AUDIO System Functions 6. Aim the remote at the AUDIO component. Press the ON•OFF key. If your AUDIO component turns off, youhave found the correct code. If yourAUDIO component does not turn off,repeat steps 3-6 above, entering the nextcode for your brand. 7. With your AUDIO component on, ...

Code Search Methods Manual Code Search 1. Manually turn on the component you want the remote to operate. 2. Press and hold the CODE SEARCH key until the indicator light illuminates.Then release the CODE SEARCH key. 3. Press and release the component key that corresponds to the component youwant the ...

If you used one of the Code Search methods to program your remote, followthe steps below to find out which code is compatible with your component.Finding the actual code and writing it down will save you time if you everneed to program the remote again (e.g., if programming is lost when youchange th...

13 Problem: The remote can’t be programmed to operate your component. • You may be too far away from the component or at a wrong angle. This remote uses IR (infrared) technology to communicate with components. The remotesends the code and the component’s IR sensor reads the code.Therefore, there mus...

14 Problem: The VCR won’t record. • As a safety feature, you must press the RECORD key twice to begin recording. • Make sure the tape is properly loaded in the VCR.• Make sure the tape is not write-protected. If the safety tab is removed, the tape is write-protected and you cannot record onto that t...

15 THOMSON INC. warrants that, for 90 days from date of purchase, it will replacethis product if found to be defective in materials or workmanship. Return itpostage paid to the Product Exchange Center address for prompt, no-chargereplacement with a current equivalent. This replacement is THOMSON INC...

Consolidate Six Remote Controls Into One! ©2004 THOMSON INC. 10330 North Meridian Street Indianapolis IN 46290 Made In Indonesia RCU600M NA IB REV A Trademark(s) ®Registered Marca(s) Registrada(s) www.rca.com Home Theatre™ Keys • Take full advantage of your Home Theatre equipment with Surround Sound...