RCA RCU600BL - Manual

Program for TV—Direct Entry Method Secondary Key Descriptions For AUDIO Operations Certain keys on the six-component universal remote have dual functions. Secondary key functionsare printed in blue on the remote and are used for AUDIO operations. Not all functions work for allbrands. Experiment with...

Program for VCR—Direct Entry Method 1. Manually turn on the VCR. 2. Locate the enclosed VCR Code List. Find your brand in the VCR Codes. Note : If your brand isn’t listed, use one of the Code Search methods to program this remote control. (See section on Code Search on page 10). 3. Press and hold th...

DVD OR CD CODE 7 Program for SATELLITE—Direct Entry Method In order for the six-component universal remote to control your DBS system, you must program it with the code that matches your SATELLITE receiver. To program your remote to control your DBSsystem, follow these steps: 1. Manually turn on the...

1. Manually turn on the CABLE box. 2. Locate the enclosed CABLE box Code List. Find your brand in the CABLE box Codes. Note : If your brand isn’t listed, use one of the Code Search methods to program this remote control. (See section on CodeSearch on page 10). 3. Press and hold the CODE SEARCH key u...

6. Aim the remote at the AUDIO component. Press the ON•OFF key. If your AUDIO component turns off, you have found thecorrect code. If your AUDIO component does not turn off,repeat steps 3-6 above, entering the next code for your brand. 7. With your AUDIO component on, press the VOL+ ( VOLUME UP ) ke...

Code Search Methods Manual Code Search 1. Manually turn on the component you want the remote to operate. 2. Press and hold the CODE SEARCH key until the indicator light illuminates. Then release the CODE SEARCH key. 3. Press and release the component key that corresponds to the component you want th...

If you used one of the Code Search methods to program your remote, follow the steps below to find out which code is compatible with your component. Finding the actual code and writing it down willsave you time if you ever need to program the remote again (e.g., if programming is lost when youchange ...

This remote cannot access every menu system of all models and brands of consumer electronicscomponents. However, if you’ve successfully programmed the DVD•AUX key to operate a DVD player, you can access DVD disc menus with the MENU key. The MENU key will access TV menu systems for most RCA, GE and P...

13 Problem: The remote can’t be programmed to operate your component. • You may be too far away from the component or at a wrong angle. This remote uses IR (infrared) technology to communicate with components. The remote sends the code and the component’s IR sensor reads the code.Therefore, there mu...

14 Problem: The VCR won’t record. • As a safety feature, you must press the RECORD key twice to begin recording. • Make sure the tape is properly loaded in the VCR.• Make sure the tape is not write-protected. If the safety tab is removed, the tape is write-protected and you cannot record onto that t...

15 THOMSON INC. warrants that, for 90 days from date of purchase, it will replace this product if foundto be defective in materials or workmanship. Return it postage paid to the Product Exchange Centeraddress for prompt, no-charge replacement with a current equivalent. This replacement is THOMSONINC...

Consolidate Six Remote Controls Into One! ©2003 THOMSON INC. 10330 North Meridian Street Indianapolis IN 46290 Made In Indonesia RCU600BL US IB REV A Trademark(s) ®Registered Marca(s) Registrada(s) www.rca.com Home Theatre ™ Keys • Take full advantage of your Home Theatre equipment with Surround Sou...