RCA RCR4258 - Manual

RCA RCR4258

RCA RCR4258 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
Page: / 6

Table of Contents:

  • Page 2 – Brand Code Search and Entry; Testing the Code for Maximum
  • Page 3 – Programming the DVD•VCR Key to Control a VCR; Direct Code Entry; Manual Code Search and Entry
  • Page 4 – Testing the Code for Maximum Functionality; Auto Code Search and Entry; Programming the DVR•AUX Key To Control Other Components
  • Page 5 – Code Retrieval; Using the Remote to Control; Exiting a Menu Mode
  • Page 6 – Troubleshooting; Limited Lifetime Warranty
Loading the manual

Four-Component

Universal Remote

Congratulations on your purchase of this four-component
universal remote. This universal remote controls up to four
electronic components and makes juggling remote controls a
thing of the past. Your remote is guaranteed to work with all
brands of components. And, not only is your remote easy to
program, it’s easy to operate, too. We’ve specially designed this
remote with big buttons to give you total control…at the touch
of your fingertips.

SAVE TH IS MAN UAL AN D TH E CODE LISTS!

Remote controls can sometimes lose their programming when you
change the batteries. Make sure you keep the manual and code lists in
a safe place so that you can reprogram the remote if you need to.

Tip:

The four-component universal remote is already programmed

to operate most RCA, GE and PROSCAN branded TVs, VCRs,
DVD players and satellite receivers. Just press the corresponding
key—DVD•VCR for a DVD player, TV for a television, SAT•CBL
for a satellite receiver, DVR•AUX for a DVR.

Component
keys (

TV

,

SAT•CBL

,

DVD•VCR

,

DVR•AUX

)

Dedicated

MENU

and

GUIDE

keys let
you access
advanced
component
functions

Transport

keys for

DVD/DVR

control

CH

and

VOL

keys

have dual
functions:
they can
act as
navigation
keys in
menu
systems
as well as
channel
and volume
controllers
outside the
menus

INFO

key

displays

information

for the

component

you’re

controlling

Battery Installation and Information

Your universal remote requires two AAA alkaline batteries
(batteries may or may not be included, depending on model).

To install the batteries:

1. Press and push the battery

compartment cover to remove it.

2. Insert the batteries, matching the

batteries to the (+) and (–) marks
inside the battery compartment.

3. Push the battery cover back into place.

Note:

If you are replacing batteries, try not to press any buttons after

you’ve taken the old batteries out. Pressing buttons while replacing
batteries causes the remote to lose the devices you’ve programmed. You
will need to program the remote again.

Battery Precautions:

• Do not mix old and new batteries.

• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-

cadmium) batteries.

• Always remove old, weak or worn-out batteries promptly and recycle or

dispose of them in accordance with Local and National Regulations.

Battery Saver

Your universal remote control saves battery power by
automatically turning off if any key is pressed for more than
60 seconds. This saves your battery life should your remote
get stuck in a place where the keys remain depressed, such as
between sofa cushions.

The

INPUT

and

— (dash)

key has three functions:

() it toggles through all the video sources
connected to your TV; (2) when the remote is in
VCR mode, this button toggles between VCR and
the TV input; (3) when you’re entering digital
channel numbers directly, this button lets you
separate the main channel number from the
subchannel number

RCR4258 / RCR4358

Universal Remote Control

Owner’s Manual

Manual del Propietario (parte posterior)

Programming Your Remote

Your universal remote can operate a variety of brands of
components. In order for your universal remote to control your
components, you need to program the remote with the codes
that match the components (See Code Lists enclosed or go to
rca.com/codefinder). These codes enable the remote to
communicate with your components. Each brand and each
component has its own “language,” and, by programming the
correct codes into your remote, you tell the remote to “speak the
same language” as your components.

Actual

model may

vary from

picture

shown

Care and Maintenance

• Keep the remote dry. If it gets wet, wipe it dry immediately.
• Use and store the remote only in normal temperature

environments.

• Handle the remote gently and carefully. Don’t drop it.
• Keep the remote away from dust and dirt.
• Wipe the remote with a damp cloth occasionally to keep it

looking new.

• Modifying or tampering with the remote’s internal components

can cause malfunction and invalidate its warranty.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Brand Code Search and Entry; Testing the Code for Maximum

2 There are four methods you can use to program your remote control to operate your components: • Brand Code Search and Entry • Direct Code Entry • Manual Code Search and Entry • Auto Code Search and Entry Most components can be programmed in one of these four ways. Try them in the order listed. In ...

Page 3 - Programming the DVD•VCR Key to Control a VCR; Direct Code Entry; Manual Code Search and Entry

3 Programming the DVD•VCR Key to Control a VCR The DVD•VCR key defaults to control a DVD player. If you want the DVD•VCR key to control a VCR, you must preprogram the DVD•VCR key. 1. Press and hold the DVD•VCR key. The LED turns on. Keep holding down the DVD•VCR key. 2. While holding down the DVD•VC...

Page 4 - Testing the Code for Maximum Functionality; Auto Code Search and Entry; Programming the DVR•AUX Key To Control Other Components

Testing the Code for Maximum Functionality Different remote control codes can provide different levels of functionality. To confirm that the component key is programmed with the correct code for maximum functionality, follow the steps below. 1. Attempt to control a variety of the component’s functio...

Other RCA Models