RCA MAF30BKR - Manual

Follow these precautions to ensure safe installation and mounting of your fl at panel TV.

1.

Be sure you have purchased the correct wall mount for your TV. Recheck the

size and weight constraints.

2.

Gather all necessary tools before you begin installation. You will need a #3 bit

Phillips screwdriver, electric drill, drill bit (included), level (integrated level on

product), stud fi nder, and hammer (for brick and concrete installations).

3.

It is essential for the wall mount plate to be attached to wall studs.

(Use a stud fi nder.)

4.

Use the included hardware for mounting purposes. This hardware has been

provided to ensure a safe and secure mount.

5.

Hire a licensed electrician to relocate an electrical outlet, if needed.

6.

Be sure to purchase wires long enough to connect the TV to the audio and

video components in your installation.

7.

We recommend you hire a professional installer, if you have any concerns

about installing the TV wall mount yourself.

Keep your sales receipt to obtain warranty parts and service and for proof of

purchase. Attach it here and record the model number.

Model No. _____________________________________________________________

Purchase Date: _________________________________________________________

Dealer/Address/Phone __________________________________________________

Safety precautions

Product diagram

Attaching wall mount plate

Drywall Installation

1.

Use a stud fi nder to locate a wood stud where you want to install the mount.

NOTE :

It is required that the wall mount plate be attached to wall studs.

2.

Locate center of stud.

3.

Place the wall mount plate against the wall, with the cord management

channel towards the bottom. Level it using the bubble guide. Mark the

locations on the wall where the mount is to be installed.

4.

Drill holes at each marked location using the enclosed wood drill bit.

5.

Secure the wall mount plate to the wall, using one drywall screw, but do not

completely tighten it yet.

6

. Using the integrated bubble level, carefully adjust the wall mount plate until it

is level.

7.

Insert the remaining screws and tighten all three screws completely.

Concrete/Brick Installation

1.

Place the wall mount plate against the wall with the cord management

channel towards the bottom.

2.

Using the integrated bubble level, mark off the position of the holes that will be

used for securing the mount.

3.

Place the wall mount plate aside.

4.

Using an electric drill and a 5/16" (8mm) masonry bit, drill holes in the marked

locations.

5.

Remove any excess dust from the holes.

6.

Insert a concrete anchor into each hole. If necessary, use a hammer to lightly

tap each anchor into place so they are fl ush with the wall.

7.

Once all anchors are in place, place the wall mount plate back into position.

Using the integrated bubble level, carefully adjust the wall mount plate until it

is level.

8.

Attach the wall mount plate, using the drywall screws provided.

9.

Make sure all screws are tightened and secure.

1.

Unplug your fl at panel TV before starting this step of the installation.

IMPORTANT:

NEVER lay the TV face down as this may cause damage to the

viewing surface.

2.

Before attaching the TV mount plate to the TV, determine which hardware to

use. Examine the back of your TV. If the back is fl at, use the M4x12mm bolts.

If your TV has a recessed back, use the longer M4x30mm bolts and 1/2"

spacers.

3.

After you have determined which bolts to use, attach the TV mount plate to

the back of your TV.

NOTE :

Be careful not to over-tighten the bolts.

Attaching the TV mount plate

1.

To complete the installation, slide the TV mount plate with your TV attached

into the wall mount plate.

2.

The retainer clip on the top of the wall mount plate should click, indicating that

the mount is secure.

3.

To remove the TV, push in on the clip and slide the TV mount plate up.

4.

For additional security and stability, insert the security bolt into the hole

located at the base of the unit.

5.

Tighten, using the Allen Wrench provided.

Attaching the TV mount plate to the wall
mount plate

Model:

MAF30BKR

Two-piece, low-profi le design

Description:

RCA Universal LCD TV Wall

Mount with Swing Arm Extension

TV Size Range:

13" – 27"

Max. Load:

40 lbs. (18kg)

Min. Profi le:

2.6" (6.6 cm)

Max. Extension:

6.2" (15.7 cm)

Tilt:

+/- 0-15°

Swivel:

180°

VESA Compliant:

100/100

Integrated Bubble Level / Cord Management System

Specifi cations

Your RCA Flat Panel TV Wall Mount features an adjustable 15-degree tilt and

180-degree pan and swivel action for easy viewing.

To adjust the tilt :

1.

Locate the adjustment knob directly behind the TV mounting point.

2.

Loosen the knob by turning it counter-clockwise.

3.

Adjust the tilt to the desired level and re-tighten the knob to lock the

adjustment in place.

To adjust the swivel :

1.

Simply move the extension arm into the desired position.

2.

If the joint is too tight or too loose, adjust the tightness of the joint.

3.

Locate the knob closest to the wall.

4.

Turn the knob counter-clockwise to loosen and clockwise to tighten.

Operation and adjustment

TV Mount Plate

Before beginning the installation process, verify that you have all the necessary tools

on hand. The following tools are required for proper installation:

Tools

#3 bit Phillips screwdriver
Stud fi nder
Electric drill
Drill bit (included)
5/16" (8mm) masonry drill bit for concrete/brick installation
Level (integrated level on product)
Allen Wrench (included)
Hammer (for concrete installations)

Package Contents

Make sure all the hardware has been included with your mount.

(1) Drill Bit
(3) 1-7/8" Drywall Screws
(3) Concrete Anchors
(2) Allen Wrenches
(4) M4x12mm Bolts
(4) M4x30mm Bolts
(4) 1/2" Spacers
(1) Security Bolt
(1) Phillips-Head Driver

Preparing to install

Adjustment Knob

Swing Arm Extension

Wall Mount

Plate

Integrated Bubble Level

Retainer Clip

Security Bolt Position

Thank you for choosing a Universal Flat
Panel TV Wall Mount from RCA. This
mount can be used for all major brands
of 13" - 27" fl at panel TVs, 40 lbs (18
kg) or under. This wall mount features
a 0-15-degree tilt, 180-degree pan and
swivel. Before attempting to mount
your television set, please remove all
parts from this package and read the
installation instructions carefully.

MAF30BKR

WARNING : Use of this mount with a TV weighing over 40 lbs. or with a

screen larger than 27" could cause the mount to fail causing property

damage and /or personal injury.

fl at panel

solutions

LCD TV Wall Mount
Installation Manual

Fits TVs 13"- 27"
Maximum Load Capacity – 40 lbs. (18 kg)

Cord Management Channel

Modèle :

MAF30BKR

Design en deux pièces surbaissé

Description :

Fixation murale pour téléviseur à écran plat universelle

RCA à bras d'extension pivotant

Dimensions de téléviseur : 13 à 27 po
Charge maximale :

40 lb (18 kg)

Profi l min. :

2,6 po (6,6 cm)

Extension max. :

6,2 po (15,7 cm)

Inclinaison :

+/- 0-15 °

Pivotement :

180 °

Conforme VESA :

100/100

Niveau à bulle intégré / Système guide-cordon

Fiche technique

Suivez ces précautions pour installer et la fi xer au téléviseur à écran plat en toute sécurité.

1.

Assurez-vous que la fi xation murale achetée convient à votre téléviseur. Vérifi ez

de nouveau les limites de dimensions et de poids.

2.

Rassemblez les outils nécessaires avant d'entreprendre l'installation. Vous

aurez besoin d'un tournevis Phillips à lame no 3, d'une perceuse électrique,

d'une mèche (incluse), d'un niveau (intégré au produit), d'un localisateur de

montants et d'un marteau (pour les installations sur brique et béton).

3.

Vous devez absolument fi xer la fi xation murale aux montants du mur. (Utilisez

un localisateur de montants.)

4.

Utilisez le matériel fourni pour la fi xation. Ce matériel garantit une installation

sûre et sécuritaire.

5.

Demandez à un électricien compétent de déplacer une prise de courant

au besoin.

6.

N'oubliez pas d'acheter des fi ls suffi samment longs pour raccorder le téléviseur

aux appareils audio et vidéo dans votre installation.

7.

Nous recommandons de faire appel aux services d'un installateur professionnel

si vous craignez de ne pouvoir installer la fi xation murale du téléviseur seul.

Conservez votre coupon de caisse pour obtenir les pièces et le service sous
garantie et comme preuve d'achat. Fixez-le ici et inscrivez le numéro de modèle.

No de modèle ___________________________________________________________

Date d'achat : ___________________________________________________________

Détaillant/adresse/téléphone ______________________________________________

Mesures de précaution

Schéma du produit

Merci d'avoir choisi une fi xation murale
pour téléviseur à écran plat universelle
RCA. Cette fi xation est compatible avec
toutes les grandes marques de téléviseurs
à écran plat de 13 à 27 po, de 40 lb (18 kg)
et moins. Cette fi xation murale comprend
un dispositif d'inclinaison de 0-15 degrés et
de panoramique et de pivotement de 180
degrés qui facilite le visionnement. Avant de
tenter de fi xer le téléviseur en place, retirez
toutes les pièces de l'emballage et lisez
attentivement les instructions d'installation.

AVERTISSEMENT : Toute utilisation de ce support avec un téléviseur d’un

poids supérieur à 40 lb (18 kg), ou dont la taille de l’écran est supérieure à

27 po, peut provoquer une défaillance du support et par conséquent des

dommages matériels et (ou) des blessures corporelles.

Avant d'entreprendre l'installation, assurez-vous d'avoir tous les outils nécessaires en

main. Les outils suivants sont nécessaires pour réaliser une installation appropriée :

Outils

Tournevis Phillips à lame n

o

3

Localisateur de montants
Perceuse électrique
Mèche (incluse)
Mèche à maçonnerie de 5/16 po (8 mm) pour béton/brique
Niveau (intégré au produit)
Clé Allen (incluse)
Marteau (pour installations sur béton)

Contenu de l'emballage

Assurez-vous que tout le matériel est inclus avec la fi xation.

(1) Mèche
(3) Vis à placoplâtre de 1 7/8 po
(3) Ancrages de béton
(2) Clé Allen
(4) Boulons M4 x 12 mm
(4) Boulons M4 x 30 mm
(4) Entretoises de 1/2 po
(1) Boulon de sécurité

(1) Outil pour vis Phillips

Préparation pour l'installation

Limited Lifetime Warranty

Audiovox Electronics Corporation (the “Company”) warrants to you the original

retail purchaser of this product that should it, under normal use and conditions,

be proven defective in material or workmanship during its lifetime while you own

it, such defect(s) will be repaired or replaced (at the Company’s option) without

charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product is to

be delivered with proof of warranty coverage (e.g. dated bill of sale), specifi cation

of defect(s), transportation prepaid, to the Company at the address shown below.

Do not return this product to the Retailer.
This Warranty does not cover product purchased, serviced or used outside the

United States or Canada.
This Warranty is not transferable and does not extend to costs incurred for

installation, removal or reinstallation of the product. This Warranty does not apply

if in the Company’s opinion, the product has been damaged through alteration,

improper installation, mishandling, misuse, neglect, or accident.
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS

LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO

EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE

PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED

WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO DURATION

OF THIS WARRANTY. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY

CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person or

representative is authorized to assume for the Company any liability other than

expressed herein in connection with the sale of this product.
Some states/provinces do not allow limitations on how long an implied warranty

lasts or the exclusion or limitation of incidental or consequential damage so the

above limitations or exclusions may not apply to you. This Warranty gives you

specifi c legal rights and you may also have other rights which vary from state/

province to state/province.
U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd.,

Hauppauge, New York 11788
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door

16, Mississauga, Ontario L5T 3A5
Trademark(s) Registered

All other brands and product names are trademarks or registered trademarks of

their respective owners.

© 2010 Audiovox Accessories Corporation

www.rcaaccessories.com

MAF30BKR_US_IB_02

MAF30BKR

solutions

écran plat

Support mural pour TV LCD
Manuel d'installation

Pour téléviseurs de 13 à 27 po
Capacité de charge maximale – 40 lb (18 kg)

Plaque de fi xation du téléviseur

Bouton d'ajustement

Bague de maintien

Bras d'extension pivotant

Niveau à bulle intégré

Plaque de

fi xation

murale

Position de boulon

de sécurité

Guide-cordon

CAUTION:

This wall mount is intended for use only with the maximum weight of

18 kg/40 lbs. Use with heavier than the maximum weights indicated may

result in instability causing possible injury. Follow the installation and

operation instructions carefully.

Ce support mural est conçu pour supporter un poids maximal de
18 kg/40 lb. Son utilisation avec un poids supérieur au maximum
indiqué pourrait causer de l’instabilité et des blessures. Respectez
soigneusement les instructions d’installation et d’utilisation.

MISE EN GARDE :