RCA L3239E - Manual
RCA L3239E – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation; NOTE; Tools required
- Page 3 – English; Part 1B – Mounting to the Wall (Concrete); Do not; Part 2 – Attaching the Mount Arms to the Display; Only use a spacer if necessary.
- Page 4 – Part 3 – Final Assembly; Do not release the
1.
Read these instructions before you begin.
If
you are unsure of any part of the process, contact
a professional contractor or installer for assistance.
Improper installation can result in injury or damage.
2.
The wall or mounting surface must be capable of
supporting the combined weight of the mount and
the display; if not, the structure must be reinforced.
3.
Locate pipes, wires, or any other hazards in the wall
where you wish to install the mount before drilling.
4.
Safety gear and proper tools must be used. Failure
to do so can result in injury or damage.
5.
Two people are recommended for installation.
Do not attempt to lift a heavy display without
assistance.
6.
Follow all instructions and recommendations
regarding adequate ventilation and suitable
locations for mounting your display. Consult the
owner‘s manual for your particular display for more
information.
Warnings
CAUTION:
This wall mount is intended for use only with the
ma ximum weight of 60 kg (130 lbs). Use with heavier
than the ma ximum weights indicated may result in
instability causing possible injur y.
Specifi cations
Display Size:
32” to 60”
Ma ximum Load:
130 lb ( 60kg)
Mounting Pattern:
600 mm x 400 mm (23.6” x 15.7” ) ma x
Profi
le:
1.2”
( 3.0
cm)
fl at panel
solutions
Fixed Wall Mount for LCD, Plasma,
and LED Displays
Instruction Manual
MS60BKR
Fits TVs 32”- 60”
Maximum Load
Capacity – 130 lb (60kg)
Continues on next page...
Pour des instructions
en français, se
reporter à la page 5.
Para obtener
instrucciones en
español, consulte la
página 9.
Box contents
Wall Plate (x1)
Mount Arm (x2)
Safety Rod (x1)
Instruction Manual (x1)
Hardware Kit (x1)
Template (x1)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Installation Part 1A – Mounting to the Wall (Drywall) IMPORTANT! For safety reasons, this mount must be secured to at least two wood studs no less than 16” apar t. The studs must be capable of suppor ting the combined weight of the mount and display. 1. Use a high quality stud fi nder to locate tw...
English 3 Part 1B – Mounting to the Wall (Concrete) IMPORTANT! For safety reasons, the concrete wall must be capable of suppor ting the combined weight of the mount and the display. The manufacturer takes no responsibility for failure caused by walls of insuf fi cient strength. 1. Place the mounting...
4 Part 3 – Final Assembly 1. With the help of another person, carefully lift your display and place it on the wall plate. Do not release the display until the mount arms have securely hooked onto the wall plate. 2. Insert the safety rod through the wall plate to prevent the display from being lifted...
