Page 2 - Product Registration; Important Information
To reduce risk of injury, charge only rechargeable batteries recommended by themanufacturer for this product. Other types of batteries may burst causing damage andpersonal injury. FCC Regulations state that unauthorized changes or modifications to this equipmentmay void the user’s authority to opera...
Page 3 - Table of Contents
1 Table of Contents Table of Contents (continued on the next page) Chapter 1: Connections & Setup Parts Checklist ......................................................................................... 6Buttons and Controls .........................................................................
Page 4 - Chapter 5: Digital Still Camera
2 Table of Contents Recording and Playback Icons ....................................................... 31Other Icons ..................................................................................... 35 Chapter 3: Recording Recording Details ........................................................
Page 5 - Chapter 6: Advanced Features
3 Table of Contents (continued on the next page) Index ............................................................................................... 65Index Playback ................................................................................ 66Protecting Images ..................................
Page 7 - Chapter 1
Chapter 1 Connections & Setup Chapter Overview: • Parts Checklist • Buttons and Controls • Getting Started • Powering the Camcorder • Using the Shoulder Strap • Setting the Date and Time • Setting the Recording Format • Setting the Tape Recording Speed • Setting the Tape Length 5 Changing Entert...
Page 8 - Parts Checklist; Make sure the box includes the items shown here:
6 Chapter 1 Connections & Setup Shoulder strapPart # ACS091 DIG ITAL (DS C IN /OU T) DS C STO P R RET AKE F LIG HT OF F AU TO O N CO UN TE R R/ M F A DE /W IP E P . AE DI GI FE CT CH AR GE VID EO RE FR ES H EJ EC T STEA DY PIX /TBC + + MENU/BRIGHT /TRACKING SNAPSHOT VOL Camcorder Parts Checklist...
Page 9 - Buttons and Controls
Connections & Setup Chapter 1 7 MENU/BRI GHT /TRACKING SNAPSHO T VOL STEA DY P IX/TB C + + DIGI TAL (DSC IN/O UT) PL AY O FF A M ST OP R RE T A KE F LIGHT OFF AU TO ON COU NTE R R /M FAD E/W IPE P. A E DIG IFEC T BATTERYRELEASEswitch S-video jack Audio/Videojacks Viewfinder MENU/BRIGHT/TRACKINGd...
Page 11 - Getting Started; Unpack the camcorder and accessories; appear damaged, contact your dealer immediately.
Connections & Setup Chapter 1 9 Getting Started This section describes the basics on how to set up your camcorder to record for the firsttime. Refer to the other sections for detailed operation and feature options. Unpack the camcorder and accessories • The items shown are packed with the camcor...
Page 12 - Adjust the hand strap; Lift the flap on the hand strap and separate the Velcro strip.; Attach the lens cap
10 Chapter 1 Connections & Setup MENU/BRI GHT /TRACKING SNAPSHO T VOL STEA DY P IX/TB C + + DIGI TAL (DSC IN/O UT) PL AY O FF A M ST OP R RE T A KE F LIGHT OFF AU TO ON COU NTE R R /M FAD E/W IPE P. A E DIG IFEC T Adjust the hand strap 1. Lift the flap on the hand strap and separate the Velcro s...
Page 13 - Attach the power supply; Plug the other end of the power supply into a working AC outlet.
Connections & Setup Chapter 1 11 2 1 DC IN jack AC power supply MENU/BRI GHT /TRACKING SNAPSHOT VOL STEA DY P IX/TB C + + DIGI TAL (DSC IN/O UT) PL AY O FF A M ST OP R RE T A KE F LIGHT OFF AU TO ON COU NTE R R /M FAD E/W IPE P. A E DIG IFEC T Attach the power supply Since the battery must be ch...
Page 14 - Turn on the camcorder; Automatic; recording; Manual; recording mode; Set the video light (
12 Chapter 1 Connections & Setup Turn on the camcorder Set the Power switch to the desired setting, eitherautomatic ( A ) or manual ( M ) record mode, powered off (OFF), or in playback mode ( ). The VIDEO indicator comes on when the camcorderis turned on. Automatic recording A places the camcord...
Page 15 - Insert a cassette tape; With the camcorder set to; PAUSE
Connections & Setup Chapter 1 13 Insert a cassette tape 1. Make sure the camcorder is connected to apower supply. 2. Open the LCD monitor fully or adjust theviewfinder. 3. With the camcorder set to A (automatic record), slide the EJECT switch until thecassette tape holder opens. Don’t force thec...
Page 16 - Using the LCD monitor; Open the monitor 90 ̊ from the camcorder body.; Using the viewfinder; Adjust the viewfinder to a comfortable position.
14 Chapter 1 Connections & Setup Use the LCD monitor or viewfinderto see what’s recording Using the LCD monitor 1. Remove the lens cap. 2. Open the monitor 90˚ from the camcorder body. 3. Tilt the monitor 180˚ forward or 90˚ down asrequired for convenient viewing whilerecording. 4. To adjust the...
Page 17 - Start recording; Play your recording
Connections & Setup Chapter 1 15 Start recording 1. Remove the lens cap. 2. Set the Power switch to A (automatic record). (The VIDEO indicator comes on.) 3. Press and release the Recording Start/Stopbutton to start recording. ( REC appears in the viewfinder or LCD monitor (but won’t show upin th...
Page 18 - Turn off the camcorder; Powering the Camcorder; Charging the Battery; Set the Power switch to OFF.; Tip
16 Chapter 1 Connections & Setup Turn off the camcorder 1. Set the Power switch to OFF. 2. Close the LCD monitor. Powering the Camcorder You can power your camcorder with a battery or ACpower. Charging the Battery 1. Set the Power switch to OFF. 2. Make sure the battery is attached to thecamcord...
Page 19 - Battery; Using the Charge Marker
Connections & Setup Chapter 1 17 Approximate charging time Approximate recording time (in minutes) Note: Recording time is reduced significantly when you use the Zoom or Record- Standby modes repeatedly or when you use the LCD monitor repeatedly. Battery Charging Time 244265 (for CC6384) approx....
Page 20 - Removing the Battery; Refreshing the Battery; Follow steps 1-3 in “Charging the Battery”
18 Chapter 1 Connections & Setup Removing the Battery Slide the BATTERY RELEASE switch and pull out thebattery pack. Refreshing the Battery If you charge a battery before it has been fullydischarged, the battery’s capacity may be reducedover time. We recommend you discharge or “refresh”your batt...
Page 21 - Battery Level Icon; Battery Care and Storage
Connections & Setup Chapter 1 19 Battery Level Icon The battery level icon appears in the viewfinder orLCD monitor and reveals the amount of power left inthe rechargeable battery. Note : The battery level icon is not recorded on the tape. This icon appears when battery is fully charged. The icon...
Page 22 - Using the Power Supply; Removing the power supply; Make sure the Power switch is set to OFF.; Using an Optional Plug Adapter in Foreign Countries; An optional plug adapter might be required in some countries.
20 Chapter 1 Connections & Setup Using the Power Supply The power supply attaches to the camcorder and lets you power it directly from standardhousehold power. The power supply operates on 110-240 volts, 50/60 Hz, so it can beused virtually anywhere in the world to power the camcorder or recharg...
Page 23 - Using the Shoulder Strap; Following the illustration, thread the strap through the eyelet.
Connections & Setup Chapter 1 21 Using the Shoulder Strap The camcorder’s shoulder strap is designed to let you carry the camera from yourshoulder and – when ready– bring the camcorder to shooting position in one quickmovement. 1. Following the illustration, thread the strap through the eyelet. ...
Page 24 - Setting the Date and Time; CAMERA MENU
22 Chapter 1 Connections & Setup Setting the Date and Time You need to set the date and time before they canbe displayed. Date and time information is recorded onto the tapeat all times, but its display can be turned on or offduring playback (see page 89). 1. Set the Power switch to M (manual re...
Page 25 - Setting the Recording Format (for CC6394 only)
Connections & Setup Chapter 1 23 Setting the Recording Format (for CC6394 only) You need to select what kind of tape you are using or type of recording you wish toperform. RD 16 S T DPS NE . - A II N R EC x V PSCA E X Z9 H EPTP T T MO S L US U S OO L ARH R Y D M E EYE O N S E T N T T G E T M H M...
Page 26 - Additional Notes about S-VHS and S-VHS ET Cassette Tapes
24 Chapter 1 Connections & Setup Additional Notes about S-VHS and S-VHS ET Cassette Tapes • Use S-VHS tapes for storing recordings for an extended period or for recordingimportant scenes, as they enable higher-quality recording and playback. • With some tapes, better picture quality may not be o...
Page 28 - Setting the Tape Length; Set the Power switch to
26 Chapter 1 Connections & Setup Setting the Tape Length You need to select the tape length so that the cameracan alert you how much time you have left on thetape. 1. Set the Power switch to M (manual record). (The VIDEO indicator comes on.) 2. Press the MENU dial in. (The CAMERA MENU appears.) ...
Page 29 - Chapter 2; Using the Monitors; Seeing What You Are Recording
27 Chapter 2 Using the Monitors Chapter Overview: • Seeing What You Are Recording • On-screen Icons Changing Entertainment. Again.
Page 30 - Using the LCD Monitor; • Turn the dial toward + to brighten the image.; Cautions
Using the Monitors 28 Chapter 2 180 ° 90 ° Seeing What You Are Recording To see what is recording, use either the LCD monitor or the viewfinder monitor. Whenthe LCD monitor is open more than 25˚, the viewfinder turns off. When you close theLCD monitor, the viewfinder turns on. Using the LCD Monitor ...
Page 31 - Using the Viewfinder; Eyepiece Focus Control
Using the Monitors Chapter 2 29 Using the Viewfinder The camcorder’s viewfinder is a miniature monitorthat displays in black and white (color for theCC6394). For convenient viewing, rotate theviewfinder up or down. Note : When the LCD monitor is open more than 25˚, the viewfinder turns off. Eyepiece...
Page 32 - Warning Icons; HEAD CLEANING REQUIRED USE CLEANING; L UME
Using the Monitors 30 Chapter 2 Recording Menu Icons Playback Menu Icons Warning Icons Indicates the amount of power left in the rechargeable battery. An empty battery icon flashes on screen when the battery’s power isalmost exhausted. Missing Cassette: Appears when the Power switch is set to either...
Page 33 - TAPE END; CONDENSATION, OPERATION PAUSED PLEASE WAIT; Recording and Playback Icons
Using the Monitors Chapter 2 31 TAPE END LENS CAP E01-E06 Condensation: CONDENSATION, OPERATION PAUSED PLEASE WAIT appears if moisture occurs inside the camcorder. When this iconappears, wait at least one hour before using the camcorder again. End of Cassette: Appears when a tape reaches its end dur...
Page 34 - Special Effect Icons
Using the Monitors 32 Chapter 2 Special Effect Icons Appears when you select SEPIA to give your recordings a brown- tone like old photographs. Appears when you select SPORTS to record fast-moving action, such as sporting events. Appears when you select SD:SHADOW to darken the picture and reduce glar...
Page 35 - Preset Titles; TITLE; MWB; Status Icons; Tracking Icons; AT
Using the Monitors Chapter 2 33 Preset Titles • The preset title selected in the TITLE menu appears here. It will be recorded on the tape when it appears. M. W. B. (Manual White Balance) Icons The icon for the manual white balance selected in the M.W.B. menu appears here. Appears when you select :FI...
Page 36 - Zoom Icon; BRIGHT; Exposure Icon; VOLUME
Using the Monitors 34 Chapter 2 Appears when you use the zoom lever. Zoom Icon 4X Bright and Volume Icons BRIGHT VOLUME Exposure Icon +03 B K Fade and Wipe Icons Press the FADE/WIPE button to display the icon for the fade or wipe you want to select. Appears when you adjust the brightness of the moni...
Page 37 - FOCUS; Focus Icons; Other Icons; Steady Pix Icon; SP; Animation and Time-Lapse Recording Icons
Using the Monitors Chapter 2 35 Appear when you are adjusting focus manually using the FOCUS menu. The icons also flash when the auto-focus system cannot operateproperly or you can’t adjust the focus any farther. These icons flash while you adjust manual focus (see page 86). Focus Icons Appears when...
Page 38 - FULL; TBC; Time Counter Icon
Using the Monitors 36 Chapter 2 Appears when the time base corrector is turned on (see page 48). Appears during playback. It is not recorded. An M appears in front of the time counter when memory-stop is on (see page 49). Indicates the approximate time remaining on the tape. Indicates the quality of...
Page 39 - Chapter 3; Recording; Recording Details
Chapter 3 Recording Chapter Overview: • Recording Details • Recording Tips 37 Changing Entertainment. Again.
Page 40 - appears in the; Journalistic Shooting
Recording 38 Chapter 3 Recording Details 1. Remove the lens cap. 2. Set the Power switch to A or M (automatic record or manual record mode). (The VIDEOindicator comes on.) 3. Open the LCD monitor or adjust the viewfinder. 4. Press and release the Recording Start/Stopbutton to start recording. ( REC ...
Page 41 - so that it faces forward, then; Quick Review; You can check the end of the last recording.; Retake; You can also rerecord certain segments.
Recording Chapter 3 39 Self-Recording You can shoot yourself while viewing your ownimage in the LCD monitor. Open the LCD monitorand tilt it upward 180 ° so that it faces forward, then point the lens toward yourself and start recording. Quick Review You can check the end of the last recording. 1. Ma...
Page 42 - Digital and Optical Zooming; Using the Zoom Lever (
Recording 40 Chapter 3 Digital and Optical Zooming You can zoom in and out for close-up or wide-angle shots by moving the zoom lever onthe camcorder. The camcorder automatically focuses at most distances when zooming.Optical zooming is possible up to 16 times, and digital zooming allows up to 400 ti...
Page 43 - Using Digital Zoom; Using Steady PixTM
Recording Chapter 3 41 Using Digital Zoom You can use digital zoom to magnify images to amaximum of 400 times normal magnification. 1. Set the Power switch to M (manual record). If the DSC indicator is on, press REFRESH forapproximately 1 second to select VIDEO. 2. Press in the MENU dial. (The CAMER...
Page 44 - Using the Video Light; Set the LIGHT switch as desired:; OFF; Video Light Details; Even if the battery icon (
Recording 42 Chapter 3 Using the Video Light To brighten the scene when natural lighting is toodim, the camcorder uses a built-in video light. You can turn on the video light at all times, set toturn on automatically when the camcorder sensesadditional light is needed, or turn off altogether. Set th...
Page 46 - Recording Tips; Learn to use the special effects to add variety to your recordings.
Recording 44 Chapter 3 Recording Tips • To improve picture quality and color reproduction, try to make sure indoor scenesare well-lit. • Don’t move the camcorder rapidly from side-to-side while recording. A steady,gradual “pan” avoids blurring and “jitter”. • Use the viewfinder or LCD monitor to mak...
Page 47 - Chapter 4; Playback; Playback Options
Chapter 4 Playback Chapter Overview: • Playback Options • Choose Your Connection 45 Changing Entertainment. Again.
Page 48 - Basic Playback
Playback 46 Chapter 4 Playback Options The camcorder’s playback features include displayingstill images and high-speed shuttle search. In thissection, you’ll also learn how to connect yourcamcorder to a TV, VCR, or computer. Playback features (Play, Pause, Forward, Reverse,Stop) can be handled using...
Page 49 - Adjusting the LCD Monitor Brightness; Tips
Playback Chapter 4 47 • If a blank portion on the tape is playedback, the screen may become black. Thisis not a malfunction. • LCD monitor/viewfinder indications: • When power is supplied from a battery appears. When power is supplied through the power supply, does not appear. • When a tape is stopp...
Page 50 - Adjusting the Tracking
Playback 48 Chapter 4 Adjusting the Tracking You may need to eliminate noise bars that appearon-screen during playback. The default setting isAuto Tracking. 1) Press in the TRACKING dial for approximately 2seconds. (MT appears). 2) Rotate the TRACKING dial until the noise barsdisappear. • To return ...
Page 51 - Using Counter Memory; Still Playback Mode
Playback Chapter 4 49 Using Counter Memory Counter Memory makes it easier to locate a specifictape segment. 1. Press and hold the COUNTER R/M button formore than 1 second. (The counter resets to 0:00:00 .) 2. Press COUNTER R/M for less than 1 second. (M appears.) 3. After recording or playback, pres...
Page 52 - Shuttle Search
Playback 50 Chapter 4 Shuttle Search Shuttle search allows high-speed searching in eitherforward or reverse directions. 1. Press or during playback. 2. To resume normal playback, press / . • During playback, press and hold or . The search continues as long as you holddown the button. Once released, ...
Page 53 - Choose your Connection; Using the Cassette Tape Adapter; Remove battery compartment cover.
Playback Chapter 4 51 Choose your Connection This manual includes information for some basic types of connections. You may alsoneed to refer your TV and VCR user’s guides for specific instructions. Using the Cassette Tape Adapter Before choosing a connection, you may find it easierto use the cassett...
Page 54 - Slide EJECT; Do not
Playback 52 Chapter 4 Inserting the Tape into the Cassette TapeAdapter 1. Before inserting the tape into the adapter,remove any slack in the tape by turning the tapewheel on the side of the tape. 2. Slide EJECT to the right to open the tape compartment lid. 3. Insert the tape with the tape window on...
Page 55 - Gently close the adapter’s tape compartment lid.
Playback Chapter 4 53 Removing the Tape from the CassetteTape Adapter 1. Slide the adapter’s EJECT switch to the right. Theload detector extends from the side and thewhirring sound indicates the tape is beingreleased before the adapter’s tape compartmentlid opens. 2. Use the access hole on the botto...
Page 56 - . If your TV is already; on the side of the camcorder.
Playback 54 Chapter 4 Connecting to a TV (or VCR) with Audio/Video Input Jacks To connect your camcorder to a TV monitor (or VCR) with audio/video input jacks, youneed an optional audio/video cable, such as VH83 (see page 117) . If your TV is already connected to a VCR, attach the camcorder to the V...
Page 57 - Set the Power
Playback Chapter 4 55 Playback on a TV (or VCR) withAudio/Video Input Jacks 1. Turn on the TV and tune it to the video inputchannel or turn on VCR and place it in the “line”or “camera mode”. (If your VCR does not have a“line” or “camera mode”, consult the VCRowner’s manual.) Operate the TV as younor...
Page 58 - Tape Dubbing; Set the camcorder’s Power switch to
Playback 56 Chapter 4 Tape Dubbing 1. Following the illustration in this chapter,connect the camcorder and the VCR. 2. Set the camcorder’s Power switch to , turn on the VCR’s power, and insert the appropriatetapes in the camcorder and the VCR. 3. Make sure the VCR is in the appropriate AUXmode and t...
Page 59 - Chapter 5; Digital Still Camera; Digital Still Camera Recording and Playback
Chapter 5 Digital Still Camera Chapter Overview: • Digital Still Camera Recording and Playback • System Requirements for Picture Navigator • Connecting to a Windows ® PC 57 Changing Entertainment. Again.
Page 61 - Setting the Picture Quality; Picture Quality Mode
Digital Still Camera Chapter 5 59 DSC STOP R RETAKE F LIGHT OFF AUTO ON C O U N TE R R /M FA D E/ W IP E P. A E D IG IF EC T CHARGE VIDEO REFRESH EJECT VIDEO indicator Power switch MENU/BR IGHT /TRACKIN G SNAPSHO T VOL STEA DY P IX/TB C + + DIGI TAL (DSC IN/O UT) PL AY O FF A M ST OP R RE T A KE F L...
Page 62 - Selecting a Snapshot Mode
Digital Still Camera 60 Chapter 5 Selecting a Snapshot Mode You can choose from 4 ways to display your digitalpictures, including full, pin-up, multi-4, and multi-9. 1. Set the Power switch to M (manual record). The VIDEO or DSC indicator comes on. 2. If the DSC indicator is not on, press theREFRESH...
Page 63 - Select
Digital Still Camera Chapter 5 61 • Select FULL to take a full screen snapshot with no frame. • Select PIN-UP to have the snapshot framed like a picture. • Select MULTI-4 to take four snapshots in a quickprogression (giving the illusion of movement)and place all four snapshots within one shot. • Sel...
Page 64 - Taking Snapshots
Digital Still Camera 62 Chapter 5 Taking Snapshots 1. Remove the lens cap. 2. Set the Power switch to M or A (manual or automatic record). (The VIDEO or DSC indicatorcomes on.) 3. If the DSC indicator is not on, press the REFRESHbutton for approximately 1 second. (The DSCindicator comes on.) 4. When...
Page 66 - Normal Playback
Digital Still Camera 64 Chapter 5 Normal Playback The snapshots you take are automatically numbered,then stored in numerical order in the built-inmemory. You can view them using the Index andSlideshow features. 1. Set the Power switch to . (The VIDEO or DSC indicator comes on.) 2. If the DSC indicat...
Page 67 - Slide Show; Index; FINE
Digital Still Camera Chapter 5 65 Slide Show You can automatically look at all the snapshots storedin memory in numerical order. 1. Set the Power switch to . (The VIDEO or DSC indicator comes on.) 2. If the DSC indicator is not on, press REFRESH forapproximately 1 second. (The DSC indicatorcomes on ...
Page 68 - Selected Image; Index Playback
Digital Still Camera 66 Chapter 5 : Protect icon When an image is protected against accidentalerasure, the padlock icon appears next to the picturemode icon. Selected Image The image you have selected is highlighted with abox. Rotate the MENU dial to move the box toanother image. Index Playback 1. S...
Page 69 - Protecting Images
Digital Still Camera Chapter 5 67 Protecting Images The Protect mode helps prevent images from beingerased. When the padlock icon appears next to thePicture Mode icon, that image can’t be deleted. 1. Set the Power switch to . (The VIDEO or DSC indicator comes on.) 2. If the DSC indicator is not on, ...
Page 70 - Unprotecting Images
Digital Still Camera 68 Chapter 5 Unprotecting Images 1. Set the Power switch to . (The VIDEO or DSC indicator comes on.) 2. If the DSC indicator is not on, press REFRESHfor approximately 1 second. (The DSC indicatorcomes on and a snapshot stored in memory isdisplayed.) 3. Press in the MENU dial. (T...
Page 71 - Deleting Images; Deleting Select Images
Digital Still Camera Chapter 5 69 Deleting Images You can delete your snapshots one at a time or all atonce. Deleting Select Images 1. Set the Power switch to . (The VIDEO or DSC indicator comes on.) 2. If the DSC indicator is not on, press REFRESHfor approximately 1 second. (The DSC indicatorcomes ...
Page 72 - Initializing the Built-in Memory
Digital Still Camera 70 Chapter 5 Initializing the Built-in Memory External noise and interference (from a TV, a radio,etc.) might prevent your camcorder from functioningproperly. If images can’t be stored or deleted, youmay need to initialize the memory. This will erase allthe images (including pro...
Page 73 - Deleting All Images
Digital Still Camera Chapter 5 71 Deleting All Images 1. Set the Power switch to . (The VIDEO or DSC indicator comes on.) 2. If the DSC indicator is not on, press REFRESH forapproximately 1 second. (The DSC indicator comeson and a snapshot stored in memory is displayed.) 3. Press in the MENU dial. (...
Page 74 - System Requirements for Picture Navigator
Digital Still Camera 72 Chapter 5 System Requirements for Picture Navigator • 66 MHz or faster (Pentium recommended) for Microsoft ® * Windows ® * 98 or later • CPU 468DX2/50 MHz or faster for Microsoft ® Windows ® 95 or later • 16MB RAM • 6MB free hard disk space • CD-ROM drive • Color display capa...
Page 75 - Connecting To A Windows; PC
Digital Still Camera Chapter 5 73 Connecting To A Windows ® PC Image data stored in the camcorder’s built-in memory can be transferred to a Windows ® PC and saved using the image transfer software, Picture Navigator. To assure safety, make sure all units are turned off before making any connection. ...
Page 77 - Chapter 6; Advanced Features; Using the Menus for Advanced Adjustment
Chapter 6 Advanced Features Chapter Overview: • Using the Menus for Advanced Adjustment • Menu Definitions • Using the Advanced Features 75 Changing Entertainment. Again.
Page 79 - Menu Definitions; System Menu; This menu can’t be accessed while recording.; Camera Menu; Refer to Exposure Control (
Advanced Features Chapter 6 77 Menu Definitions The following charts will help you get acquainted with the various menus and some briefdefinitions of their features. For more detailed explanation, refer to the correspondingsections. System Menu This menu can’t be accessed while recording. REC MODE* ...
Page 80 - Factory Preset: Doesn’t display black bars.
Advanced Features 78 Chapter 6 Factory Preset: Doesn’t display black bars. Allows you to record black bars at the top and bottom ofthe screen to produce a cinema-like wide-screen effect.If you take a snapshot in the 16x9 mode, the snapshot isrecorded without the black bars. Factory preset: Records i...
Page 81 - DEMO MODE; ON
Advanced Features Chapter 6 79 Allows you to select the language (ENGLISH, FRENCH, orSPANISH) of Instant Titles ( see page 90 ). Allows you to set the current date and time ( see page 22 ). Factory Preset: Demonstrates certain functions automatically.When DEMO MODE is set to ON and you have exited a...
Page 82 - Using the Advanced Features; Fades; FADER
Advanced Features 80 Chapter 6 DSC STOP R RETAKE F LIGHT OFF AUTO ON C O U N TE R R /M FA D E/ W IP E P. A E D IG IF EC T CHARGE VIDEO REFRESH EJECT VIDEOindicator Power switch MENU/BR IGHT /TRACKIN G SNAPSHO T VOL STEA DY P IX/TB C + + DIGI TAL (DSC IN/O UT) PL AY O FF A M ST OP R RE T A KE F LIGHT...
Page 83 - Wipes; SHUTTER
Advanced Features Chapter 6 81 Wipes SHUTTER Wipes in as a black screen from the top and bottom,closing over the image like a shutter. Wipes out as anew image, pushing open the black screen verticallyfrom the center. SLIDE Wipes in as a black screen moves in from the left togradually cover the image...
Page 84 - Program AE With Special Effects; SPORTS
Advanced Features 82 Chapter 6 Program AE With Special Effects 1. Set the Power switch to M (manual record). 2. Press REFRESH for approximately 1 second to select VIDEO or DSC. 3. Press P.AE repeatedly until the desired mode’s name and icon appear. (They aredisplayed for approximately 2 seconds, the...
Page 85 - Captures faster action than Sports mode.; Digital Effects; SEPIA; see page
Advanced Features Chapter 6 83 2 S1/2000(1/2000 sec. High Speed Shutter) Captures faster action than Sports mode. Notes: • The screen becomes slightly dark in theHigh Speed Shutter mode. Use in well-litsituations. • In the High Speed Shutter or Sportsmodes, picture color may be adverselyaffected if ...
Page 86 - MOSAIC; Exposure Control
Advanced Features 84 Chapter 6 NEGA POSI (Negative Positive) The colors of a picture are reversed. MOSAIC Turns recorded scenes into a mosaic pattern. STRETCH Doubles the width of the picture horizontally. Note: Digital Effects can be changed during recording or during Record-Standby. Exposure Contr...
Page 87 - Focusing; Auto Focus; When two subjects overlap in the same scene.
Advanced Features Chapter 6 85 Notes: • To return to the factory setting, selectAUTO in step 5. • To readjust exposure, repeat theprocedure from step 3. Focusing Auto Focus The camcorder’s Full Range automatic focus systemoffers continuous shooting ability from close-up toinfinity. However, correct ...
Page 88 - Manual Focus
Advanced Features 86 Chapter 6 Manual Focus Make the necessary viewfinder adjustments to usethe viewfinder ( see page 29 ). 1. Set the Power switch to M (manual record). Press REFRESH for approximately 1 second toselect VIDEO or DSC. 2. Press the MENU dial in. (The CAMERA MENU appears.) 3. Rotate th...
Page 89 - White Balance Adjustment; AUTO
Advanced Features Chapter 6 87 White Balance Adjustment White balance refers to the correctness of color reproduction under various lighting. Ifthe white balance is correct, all other colors will be accurately reproduced. The white balance is usually adjusted automatically. However, more advancedcam...
Page 90 - Manual White Balance; Press in the MENU dial until; Red paper
Advanced Features 88 Chapter 6 Manual White Balance Perform Manual White Balance when shooting undervarious types of lighting. 1. Follow steps 1 through 4 of the white balanceadjustment, and highlight MWB . 2. Hold a sheet of plain white paper in front of thesubject. Adjust zoom or position yourself...
Page 92 - Instant Titles
Advanced Features 90 Chapter 6 Instant Titles The camcorder has 8 preset titles in memory. Youcan superimpose one of them over the video image. Instant Titles can be displayed in English, French,and Spanish. 1. Set the Power switch to M (manual record). If the DSC indicator is on, press REFRESH fora...
Page 93 - Animation
Advanced Features Chapter 6 91 Animation You can shoot a series of pictures, each slightlydifferent, of the same object for a brief period oftime. 1. Set the Power switch to M (manual record). If the DSC indicator is on, press REFRESH forapproximately 1 second to select VIDEO. 2. Make sure the recor...
Page 94 - REC TIME
Advanced Features 92 Chapter 6 Time-Lapse You can record sequentially at preset time spans.Leaving the camcorder aimed at a specific subject,you can record subtle changes over an extendedperiod of time. 1. Set REC TIME using steps 1-7 of Animation ( see page 91 ). 2. Rotate the MENU dial to highligh...
Page 95 - Chapter 7; Other Information
Chapter 7 Other Information Chapter Overview: • Troubleshooting • Final Notes • Care and Cleaning • Traveling Tips • Specifications • Customer Assistance and Service • Limited Warranty • FCC Declaration of Conformity and Industry CanadaInformation • Optional Accessories • Index 93 Changing Entertain...
Page 96 - Troubleshooting; Power Problems; No power is supplied.; Feature and Function Problems; Some menus or features are not available.; Vertical white lines appear when shooting a very bright object.
Other Information 94 Chapter 7 Troubleshooting If you’re having problems with your camcorder, try the solutions in this section. If theproblem still exists, please consult your nearest RCA authorized service center. External noise and interference (from a TV, a radio, etc.) might prevent your camcor...
Page 97 - The eyepiece focus control needs to be adjusted (; LENS CAP; The
Other Information Chapter 7 95 Bright, crystal-shaped spots appear in the LCD monitor and theviewfinder. Sunlight is directly entering the lens. This is not a defect of the camcorder. The rear of the LCD monitor is hot. The light used to illuminate the LCD monitor causes it to be hot. Close the LCD ...
Page 98 - Recording Problems; The camcorder Power Switch has not been set to; Playback Problems; The TV has not been set to its VIDEO input channel.
Other Information 96 Chapter 7 Recording Problems Recording cannot be performed. Make sure the Erase Protection tab is in the position that allows recording. If not, slidethe tab. Some tapes have removable tabs. If the tab has been removed, cover the holewith adhesive tape. If DSC is selected, it is...
Page 99 - Rewinding or fast-forwarding can’t be performed.; The tape is already fully wound on one reel or the other.; The picture is blurred in the Quick Review or Retake mode.; If you have not performed Date/Time Setting (; The tape won’t eject.; The battery pack is running low.
Other Information Chapter 7 97 Rewinding or fast-forwarding can’t be performed. The tape is already fully wound on one reel or the other. The picture is blurred in the Quick Review or Retake mode. This is normal while recording in the SLP mode. Some noise may be present whilerecording in the SP mode...
Page 100 - Digital Still Camera Problems; ALL
Other Information 98 Chapter 7 Digital Still Camera Problems Although SNAPSHOT is pressed, the snapshot isn’t stored in the built-inmemory. When the remaining picture number icon blinks 0 , you must delete some pictures before you can store new ones ( see page 69 ). It isn’t possible to shoot in suc...
Page 101 - Final Notes; Power
Other Information Chapter 7 99 Final Notes Power • Perform charging where the temperature is between 10 ° C and 35 ° C (50 ° F and 95 ° F). 20 ° C to 25 ° C (68 ° F to 77 ° F) is the ideal temperature range for charging. If the environment is too cold, charging may be incomplete. • Charging times ar...
Page 102 - Video Recording
Other Information 100 Chapter 7 Video Recording • When the Power switch is set to A or M and the LCD monitor is opened at an angle of 25˚ or more, the LCD monitor switches on and the viewfinder switches offautomatically to save power. • The cassette tape holder can’t be opened unless a power supply ...
Page 103 - Tapes; A power supply must be attached to load or eject a tape.; Turn the power on before loading or unloading tapes
Other Information Chapter 7 101 Tapes • A power supply must be attached to load or eject a tape. • When loading a tape, it takes a few seconds for the cassette tape holder open. Neverapply force to the holder or door cover as this might result in damage to thecamcorder and void the warranty. • If th...
Page 104 - Care and Cleaning; After Using the Camcorder
Other Information 102 Chapter 7 Care and Cleaning Care and Maintenance After Using the Camcorder 1. Set the Power switch to OFF. 2. Open the LCD monitor at least 60˚. 3. Slide the EJECT switch to open the cassette tape holder, then remove the tape. 4. Press the area marked CLOSE to close and lock th...
Page 105 - Proper Care and Storage; Always cap the lens when the camcorder is not in use.
Other Information Chapter 7 103 Proper Care and Storage • Keep dirt from entering the camcorder’s cassette tape door. Dust and grit are abrasiveand cause excessive wear to both the recording/playback heads and tapes. • Always cap the lens when the camcorder is not in use. • Before handling the camco...
Page 106 - Tape Care and Storage; Never use tapes with damaged or spliced tape.
Other Information 104 Chapter 7 Tape Care and Storage • When finished with a tape, rewind it, remove it from the camcorder, and label it.Protect the tape using the erase protection tab if necessary. • Store tapes vertically in their protective cases at normal room temperatures. Neverleave the camcor...
Page 107 - Things to Avoid; Never aim the camcorder at the sun or other bright objects.
Other Information Chapter 7 105 Things to Avoid • Do not attempt to disassemble the camcorder. There are no user-serviceable partsinside. • Avoid operating the camcorder immediately after moving it from a cold location to awarm location. Give the camcorder 1-1/2 to 2 hours to reach a stable temperat...
Page 108 - Traveling Tips
Other Information 106 Chapter 7 Traveling Tips • Write down your camcorder’s serial number and keep it separate from the camcorderwhen traveling. If your camcorder is lost or stolen, you will be able to identify it. • Use extra care to avoid damage to your camcorder and accessories when operatingthe...
Page 109 - Specifications; Auto/Manual adjustment
Other Information Chapter 7 107 Specifications Camcorder Format S-VHS*/VHS NTSC standard Power source DC 11 V (Using AC power supply) DC 6 V (Using battery pack) Power consumption Viewfinder on:4.7 W (CC6384)4.4 W (CC6394) LCD monitor on:5.2 W (CC6384)5.4 W (CC6394) Video light: 3.0 W Signal system ...
Page 110 - Digital; AC Power Supply; Power requirement
Other Information 108 Chapter 7 Digital ø2.5 mm, 4-pole, mini-head jack S-Video* Y : 1 V (p-p), 75 Ω , analog output C : 0.29 V (p-p), 75 Ω , analog output AC Power Supply Power requirement U.S.A. and Canada: AC 120 V, 60 HzOther countries: AC 110 V to 240 V‘, 50 Hz/60 Hz Output DC 11 V , 1 A Dimens...
Page 111 - You can reach Thomson at the following number:; Returning equipment to Thomson for repair or exchange; Obtain a Service Request (SR) number from the telephone; Customer Assistance and Service
Other Information Chapter 7 109 Customer Assistance and Service You can reach Thomson at the following number: 800-283-6503 (Toll free inside U.S.A.) Our toll-free camcorder number operates from 8 a.m. to 5 p.m. CST Monday – Friday forU.S. customers only Thomson provides a toll-free telephone number...
Page 113 - Limited Warranty; What your warranty covers:; Any defect in materials or workmanship.; For how long after your purchase:; 0 days for labor charges.; During the initial 90 days
Other Information Chapter 7 111 Limited Warranty Limited Warranty What your warranty covers: • Any defect in materials or workmanship. For how long after your purchase: • 90 days for labor charges. • One year for parts. The warranty period for rental units begins with the first rental or 45 days fro...
Page 114 - To receive a replacement Camcorder before you return yours:; Option I; IF; Option II
Other Information 112 Chapter 7 To receive a replacement Camcorder before you return yours: Option I 1. Provide your Discover, MasterCard, or Visa account number and expiration date toour phone representative. This is for security purposes. If we receive your unit,excluding all accessories, within 1...
Page 115 - What your warranty does not cover:
Other Information Chapter 7 113 • A brief note describing your camcorder’s problem. • Your name, address and phone number. Return transportation, storage, handling, and insurance costs are your sole responsibility.We accept no liability in case of damage or loss. 4. The representative will advise th...
Page 116 - How State Law relates to warranty:
Other Information 114 Chapter 7 How State Law relates to warranty: • This warranty gives you specific legal rights and you also may have other rights thatvary from state to state. If you purchased your camcorder outside the United States: • This warranty does not apply. Contact your dealer for warra...
Page 118 - Optional Accessories; To order accessories, contact your local Dealer.; AC201A Soft Carrying Case
Other Information 116 Chapter 7 Optional Accessories We invite you to take a look at some great ideas for sparking creativity and adding to thefun of using your camcorder. The following pages have a selection of accessories to helpmake your memorable moments look and sound even better. These accesso...
Page 119 - Using the Optional AC088 Tripod
Other Information Chapter 7 117 VH83 A/V Cable Cautions: • Before using a tripod, make sure it is stableenough to hold the camcorder withoutfalling over. Do not transport thecamcorder attached to the tripod. • When attaching your camcorder to atripod, be careful not to force the tripodscrew into the...
Page 120 - Video Accessories
Other Information 118 Chapter 7 To order accessories, contact your local Dealer. If a dealer is not nearby, you can also follow the directions below to order by telephoneor direct-by-mail. United States and Canada Orders To place your order by phone, have your Visa, MasterCard, or Discover card read...
Page 121 - Accessories Order Form; Description; Total Amount Enclosed; Detach Here
Other Information Chapter 7 119 Accessories Order Form Description Part No. Price Qty. Total Super Lightweight Tripod AC088 $ 49.95 Soft Camcorder Case AC201A $ 34.95 Shoulder Strap ACS091 $ 12.95 Rechargeable Battery (2 hour) 244265 $ 59.99 (for CC6384) Rechargeable Battery (1 hour) 244427 $ 49.95 ...
Page 122 - USE YOUR CREDIT CARD
Other Information 120 Chapter 7 ¤ r r s TM Charge your order on your VISA,MasterCard, or Discover Card by filling in below USE YOUR CREDIT CARD IMPORTANT: Copy complete account number from your VISA card IMPORTANT: Copy complete account number from your MasterCard Expiration date: Expiration date: C...
Page 123 - This Page Left Blank Intentionally
Page 126 - Snapshots
Index 124 Chapter 7 S S-video and audio connection 54Seeing what you are recording 28Selected image 66Self-recording 39Service 109Shoulder strap 6, 21Shuttle search 50Slide show 65Snapshot icon 36Snapshot mode selecting 60 Snapshots taking 62 Speaker volume 47Specifications 107Start recording 15Stat...
Page 127 - Unprotecting images 68
Index Chapter 7 125 U Unprotecting images 68 V Video light 12, 42Video light details 42Viewfinder 14 W W and T (zoom lever) 40Warning icons 30Warranty 111White balance adjustment 87Wipes 81 Z Zoom level icon 34Zoom lever 34, 40Zooming digital 40optical 40zoom lever 40