RCA ANT1275F QSG 00 - Manual

RCA ANT1275F QSG 00

RCA ANT1275F QSG 00 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
Page: / 2
Loading the manual

DO NOT RETURN this product to the store!

Please call our

toll-free help line at 1-800-768-1969 or visit RCAAntennas.net

Note:

If your TV’s antenna input

is already connected to a satellite

receiver, cable box, or digital

converter, connect the antenna’s

coaxial cable to the antenna input

jack on that device.

Quick

Start Guide

ANT1275F Amplified Indoor Antenna

STOP!

Insert the power adapter into the

antenna’s DC jack. Plug the other end

into a wall outlet or power strip.

Different channels may require different antenna

adjustments. If you find that you’re not receiving

channels you normally receive, try the following

adjustments in the order listed here:

> Extend the antenna’s dipoles (rods) and rotate them

until you get the best picture. (Depending on the

channel’s frequency, this may or may not have any

effect.)

> Try the channel without the antenna’s amplifier—set

the amplifier on/off switch on the antenna’s back

panel to OFF. (Don’t forget to turn the amplifier back

on for other channels!)

> Rotate the base of the antenna until you get the best

picture. (Don’t forget to move it back to its original

position for the other channels.)

Check out setup videos at

www.RCAAntennas.net/Setup

Versión

en español

al dorso

Out to TV

DC

Set the amplifier on/off switch (on the

antenna’s back panel) to ON.

Amplifier On/Off switch

Find the best location for your
antenna.

1

TV antennas perform

best when pointed in

the direction of the

broadcaster’s tower.

For help finding your local

broadcast towers, go to

www.RCAAntennas.net

Antenna Placement Tips

Avoid metal surfaces (like a metal stand).

Move the antenna close to or in a window.

Position the antenna as high as possible.

Connect the antenna to your TV.

2

Plug in the antenna.

3

Turn on the amplifier.

4

Adjust your antenna for best
reception.

5

Most TVs have a channel scan option in their menu

system, many times in a SETUP or CHANNEL menu

under ANTENNA.

For detailed instructions on performing a channel scan,

see the owner’s manual that came with your TV.

Scan for channels on your TV.

6

ANT1275F QSG 00

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other RCA Models