RCA 200KITNA1800 - Manual

Fits TVs With 100mm x 200mm VESA Hole Pattern

Adapter for

Flat Panel TV Wall Mount

User’s Manual - English

This adapter fits TVs with mounting holes that are further

apart than the holes on the wall mount's TV mounting

plate. This adapter makes it possible to mount those TVs

on the TV mounting plate and, then, on the wall, using the

RCA Universal Flat Panel TV Wall Mount (sold separately).
Please remove all parts from this package and read the

installation instructions carefully.

In this section, you will use the hardware that comes with

the Wall Mount package.

1.

Unplug your flat panel TV before starting this step of

the installation.

IMPORTANT:

NEVER lay the TV face down as this

may cause damage to the viewing surface.

2.

Before attaching the TV mount plate and adapter to the

TV, determine which hardware to use. Examine the

back of your TV. If the back is flat, use the M4x12mm

bolts. If your TV has a recessed back, use the longer

M4x30mm bolts and 1/2" spacers.

3.

After you have determined which bolts to use, attach

the TV mount plate and adapter to the back of your TV

(use the outermost holes on the adapter).

NOTE :

Be careful not to over-tighten the bolts.

Continue with wall mount installation:

Follow the instructions that come with the wall mount for

attaching the wall mount plate to the wall and attaching

the TV mount plate to the wall mount plate.

Attaching the TV mount plate

MAF200KIT

Limited Lifetime Warranty

Audiovox Electronics Corporation (the “Company”) warrants to you the

original retail purchaser of this product that should it, under normal use

and conditions, be proven defective in material or workmanship during

its lifetime while you own it, such defect(s) will be repaired or replaced (at

the Company’s option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the

product is to be delivered with proof of warranty coverage (e.g. dated bill

of sale), specification of defect(s), transportation prepaid, to the Company

at the address shown below. Do not return this product to the Retailer.
This Warranty does not cover product purchased, serviced or used

outside the United States or Canada.
This Warranty is not transferable and does not extend to costs incurred for

installation, removal or reinstallation of the product. This Warranty does

not apply if in the Company’s opinion, the product has been damaged

through alteration, improper installation, mishandling, misuse, neglect,

or accident.
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS

WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT

PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S

LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER

FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE

SHALL BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE

SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR

INCIDENTAL DAMAGES WHATSOEVER. No person or representative is

authorized to assume for the Company any liability other than expressed

herein in connection with the sale of this product.
Some states/provinces do not allow limitations on how long an implied

warranty lasts or the exclusion or limitation of incidental or consequential

damage so the above limitations or exclusions may not apply to you. This

Warranty gives you specific legal rights and you may also have other

rights which vary from state/province to state/province.

U.S.A. :

Audiovox Electronics Corporation, 150 Marcus Blvd.,

Hauppauge, New York 11788

CANADA:

Audiovox Return Center, c/o Genco, 6685 Kennedy Road,

Unit 3, Door 16, Mississauga, Ontario L5T 3A5

Trademark(s) Registered

All other brands and product names are trademarks or registered

trademarks of their respective owners.

© 2007 Audiovox Accessories Corporation
111 Congressional Blvd., Suite 350
Carmel, IN 46032

www.rcaaccessories.com

MAF200KIT_NA _IB_00

for models MAF10, MAF20, MAF30, MAF40, and MAF50

Attaching the adapter

Before you can attach the TV mount plate to your TV,

you need to attach the adapters in this package to the TV

mount plate.
The package comes with the bolts, washers you'll use to

attach the adapter to the TV mount plate.

NOTE :

Use the included hardware for mounting

purposes. This hardware has been provided to ensure

a safe and secure mount.

1.

Place one of the adapter plates against the face of the

TV mount plate. Make sure the side of the plate with

two recessed holes is facing you.

2.

Line up the inside holes on the adapter with the

outermost holes on the top of the TV mount plate.

Insert two of the included bolts through these holes.

3.

Place the lock washers on the exposed ends of the

bolts, as close as you can to the TV mount plate.

4.

Screw the nuts onto the exposed ends of the bolts.

5

. Repeat steps 1-4 with the other adapter plate on the

outermost holes on the bottom of the TV mount plate.

6.

Tighten all four bolts completely.