Page 2 - Equipment Approval Information; Notification to the Local Telephone Company; US Number i s located on the cabinet bottom
2 Equipment Approval Information Your telephone equipment i s approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA . 1. Notification to t...
Page 3 - Rights of the Telephone Company; Interference Information
3 2. Rights of the Telephone Company Should your equipment cause trouble on your line which may harm the telephone network , the telephone company shall, where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstance...
Page 5 - IMP ORTANT SAFETY INSTRUCTIONS
5 This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. IMP ORTANT SAFETY INSTRUCTIONS When using your telephone equipment,basic safety precautions should al- ways be followed to reduce the risk of fire, elect...
Page 6 - Table of Contents
6 Table of Contents Equipment Approval Information...........2 Interference Information..........................3 Hearing Aid Compatibility.........................4 Industry Canada (I.C.) Notice... .. .................4 IMPORTANT SA FE T Y INSTRUCTIONS.......5 Introduction............................
Page 7 - Introduction; Short Glossary of Terminology Used in this Manual; Speaker; BeforeYouBegin; Parts Checklist
7 Introduction CAUTION: When using telephone equipment,there are basic safety instructions that should always be followed. Refer to the IMP ORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. Short Glossary of Terminology Used in this Manual Hook switch. The par...
Page 8 - Important Installation Information; BaseLayout
8 (button) Important Installation Information • Never install telephone wiring during a lightning storm. • Never touch uninsulated telephone wires or terminals, unless the telephone line has been disconnected at the network interface. • Use caution when installing or modifying telephone lines. • Nev...
Page 9 - Installation & Setup; Installing the Batteries; Installation; Desktop Installation
9 Installation & Setup CAUTION: Disconnect the phone cord from the wall outlet before installing or replacing the batteries. Installing the Batteries Your Caller ID phone uses 4 AA-size alkaline batteries for receiving and storing Caller ID records and for storing the numbers you use for memory ...
Page 11 - Line 1; Wall Mount Installation; To detach the desktop pedestal:
11 OFF - Telephone will not ring. LO - Sound will be lowest . HI - Sound will be loudest . 6. Press the Line 1 button if the Line 1 telephone cord is connected. Otherwise, press Line 2 . 7. The unit is properly installed if you pick up the handset and hear the dial tone. Otherwise, recheck all insta...
Page 12 - Data Port
12 To connect LINES 1 + 2: There are two possible connections. Refer to Figure 1 at beginning of Installation section if you have one single line (RJ11C) phone jack or one dual-line (RJ14C) phone jack. 1. Connect one end of either straight telephone line cord to the jack marked Line 1+2 on the back ...
Page 13 - Setting Up the Caller ID Menu; Setting the Display Language
13 Setting Up the Caller ID Menu You should not plug the telephone into the modular jack while setting up the Caller ID menu. 1. Press the Menu button to enter the menu feature configuration mode. # 1. >ENG F R A ESP (CID language default English) # 2. CONTRAST (default level is 3). # 3. LOCAL AR...
Page 14 - Review; Setting the Dial M ode; Menu; Caller ID Features; Summary Screen; Receiving and Storing Calls
14 3. Press the Review button to enter digit . NOTE: The local area code may also be entered directly by using the num- ber pad. 4. Press the Menu button to save. Setting the Dial M ode This adjustment allows you to select tone (touch-tone) or pulse (rotary) dialing. 1. Press the Menu button until...
Page 16 - CallerID Display Messages; CALL WAITING
16 pressing the Dial button. For example, sometimes a 7-digit local number can- not be dialed because it requires a 10-digit or 11-digit format . Press the Dial button repeatedly to scroll through the 7, 10, and 11-digit numbers. 7-digits: 7-digit telephone number (i.e. 555-5555) 10-digits: 3-digit ...
Page 17 - Speakerphone Basics; Speakerphone Location; Speakerphone Use; Telephone Basics; Line
17 Speakerphone Basics Speakerphone Location Your phone features a speakerphone for ease of use and convenience during a phone conversation. At any time during a conversation, you can lift the handset to stop using the speakerphone. Likewise, when you are using the handset , press the Speaker button...
Page 18 - Line Status Indicators; When; Making a Phone Call
18 Line Status Indicators This two-line phone is designed for use at multiple stations. The indicator light tells you what is happening on each line. When the Icon Means: indicator light is: on the is: Off Off not in use. Off call being received. Green On in by this phone. Flashing call on hold. Off...
Page 19 - Additional Telephone Features; Redial; Hold
19 Using the Speakerphone To use the speakerphone feature, press a line button and then press the Speaker button. For more information refer to Speakerphone Basics. Placing a Call While Talking on Another Line To place a call without hanging up on the first call: 1. Press the Hold button to put the ...
Page 20 - Conference Calls; To connect and conference:; Flash
20 1. Press the Hold button to place a call on hold (the line indicator is red). 2. Press the Line button and pick up the handset or press the Speaker button to resume the conversation. Conference Calls You can use the conference call feature when you have calls on both lines and want to have a thre...
Page 21 - Temporary Tone Dialing; Message Waiting; Delete; Memory; Storing a Name and Number in Memory; Store
21 1. Press the Mute button. The mute indicator comes on. 2. Press Mute again to turn it off. Temporary Tone Dialing If you have pulse (rotary) service and want to access customer calling services (such as telebanking and long distance services) that require tone dialing, you can use this feature to...
Page 24 - Chain Dialing; For example; Storing a Pause in Memory; Replacing the Batteries
24 Chain Dialing Chain dialing allows you to dial a sequence of stored numbers from separate memory locations. For example Memory location Local access number A Long distance company B Authorization code ID C Long distance phone number 1. Select the line you want to use by pressing the corresponding...
Page 25 - TroubleshootingTips; No Dial Tone
25 3. Remove the 4 AA-size alkaline batteries from the battery compartment as show n on the diagram. 4. Insert 4 AA-size alkaline batteries in the battery compartment. 5. Snap the battery compart- ment door back into place and replace the mounting bracket. 6. If the line cord was previ- ously connec...
Page 26 - WarrantyAssistance
26 area. See paragraph 1 of the Equipment Approval Information section of this User ’s Guide for more information). • See No Dial Tone. Incoming Voice Volume Low • Are other phones off hook at same time? If so, this is normal condition as volume drops when additional phones are used at once. • Check...
Page 27 - Limited Warranty
27 For instructions on how to obtain warranty service, you may call Customer Care at 1-877-722-4908 or you may visit our website at www.rca4phones. com. If you prefer, you may write to us at: Supreme Power USA LLC PO Box 501045 Indianapolis IN 46250-1045 Please do not send products to this address a...
Page 28 - Limitation of Warranty:
28 • Ship your product prepaid, to the address we provide. We suggest shipping your product via a traceable carrier, as we are not responsible for lost,mis- directed or damaged shipm ents. You may want to write the date shipped, carrier and tracking number here: • Upon receipt of your product we wil...
