PVI Industries PV 6382 07 - Manual
PVI Industries PV 6382 07 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
LOW NOx MAXIM
▪
PACKAGED GAS WATER HEATER
NICKELSHIELD
®
NICKEL-PLATED STORAGE TANK
PVI reserves the right to change
the design and specification
without notice.
PV 6382 11/07
PVI INDUSTRIES, LLC
FORT WORTH, TEXAS 76111
(800) 784-8326
▪
(817) 335-9531
▪
www.pvi.com
STANDARD FEATURES AND EQUIPMENT
•
82% thermal efficiency
•
SCAQMD compliant
•
NOx emissions certified at <55 ppm at 3% 0
2
and/or less than 40 nanograms per joule (199 to 399 MBtu/h)
•
NOx emissions certified at <30 ppm at 3% 0
2
(above 399 MBtu/h)
•
NICKELSHIELD
®
nickel-plated tank with 10-year warranty, three-year scale failure warranty and one-year cost-free service policy
•
Nonferrous, removable fittings at all tank connections
•
Nickel-plated, copper-clad steel firetubes
•
SCALEGUARD
®
tubesheet protection
•
Upper and lower immersion operating thermostats
•
Immersion temperature limiting device (high limit control)
•
ASME-rated temperature and pressure relief valve
•
Drain
valve
•
Handhole tank cleanout
•
Power combustion burner
•
Spark
ignition
•
Electronic combustion sequencer and flame safeguard with pre-purge
•
Combustion sequence indicating lights (> 399,000 Btu/h)
•
Differential pressure air flow switch
•
Second main gas valve (> 399,000 Btu/h)
•
Compliant with ASHRAE 90.1 for thermal efficiency and standby loss
•
Fiberglass insulated tank
•
Draft regulator (barometric damper)
•
Steel jacket panels with industrial-grade finish
•
Factory-authorized start up
•
ASME stamped—150 psi MAWP
•
National Board Registered for 150 psi working pressure
•
UL listed to safety standard UL 795 “Commercial-Industrial Gas Heating Equipment”
•
FM compliant
OPTIONAL FEATURES AND EQUIPMENT
Long-life service policy
AGA-rated temperature and pressure relief valve(s)
2,500,000 Btu/h FM controls package. Adds electronic low-water cutoff, manual-reset high limit, single-try firing control and high-low
gas pressure switch. (not required for FM compliance below 2,500,000 Btu/h) (available only on 540,000 and 650,000 Btu/h)
CSD-1 / IRI compliant components include manual reset electronic low water cut off, manual reset temperature limiting device and
Hi-Lo gas pressure switch (as required)
Electronic combustion sequencer and flame safeguard with pre– and post-purge
Electronic low-water cutoff
Manual-reset, temperature limiting device
DUO-SET
™
controls for dual-temperature applications
Dial temperature and pressure gauges
Tridicator
Alarm bell with silencing switch
Seven-day time clock
Digital seven-day time clock with battery backup
Air intake assembly for remote combustion air (requires field connection to ductwork supplied by others)
Consult factory for other codes
See complete warranty and/or service policy for details
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
