Pro-Ject X1WAL - User Manual
Pro-Ject X1WAL Player – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Controls, features and connections; Turntable accessories
- Page 5 – Safety instructions; Hold the plug when unplugging the power cord. Never handle the
- Page 6 – red
- Page 7 – CARTRIDGE DOWNFORCE ADJUSTMENT; The recommended downforce for the factory fitted cartridge is; ANTI-SKATING FORCE ADJUSTMENT; from bearing rings; 0mN and bigger; CONNECTION TO THE AMPLIFIER
- Page 8 – MAINS POWER CONNECTION; connecting the power supply to the mains; FITTING THE LID; finger
- Page 10 – TECHNICAL SPECIFICATIONS; ’’ Carbon/Alu sandwich tonearm; The platter doesn't turn although the unit is switched on:
- Page 11 – Distorted or inconsistent sound from one or both channels:; Service
INSTRUCTIONS FOR USE
X1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
© Pro-Ject Audio Systems · Pro-Ject X1 · Revision 2019.10.14 3 X1 Controls, features and connections (1) MAIN PLATTER (2) CHASSIS (3) SPEED CONTROL (4) MOTOR WITH MOTOR PULLEY (5) DRIVE BELT (6) SUB-PLATTER (7) TONEARM FLANGE (8) TONEARM COUNTERWEIGHT (9) TONEARM LIFT (10) TONEARM REST AND REMOVABLE...
© Pro-Ject Audio Systems · Pro-Ject X1 · Revision 2019.10.14 5 Dear music lover, Thank you for purchasing a Pro-Ject Audio Systems record player. In order to achieve maximum performance and reliability, please study these instructions carefully. Warning of a hazard for the user, the unit or possible...
© Pro-Ject Audio Systems · Pro-Ject X1 · Revision 2019.10.14 6 SETUP AND INSTALLATION 1. PLATTER AND DRIVE BELT ASSEMBLY Install the drive belt (5) and the main platter (1) as shown in following ilustration. 2. MOUNTING AND CONNECTING THE CARTRIDGE All cartridges with half inch mounting holes can be...
