Power Acoustik PD-710 - Manual

Page 4 - Accessories

4 Accessories Package contains the following accessories for installation and operation of the unit. (1) Washer, Spring Washer, M5 Nut 1 each (2) Mounting Strap 1 (3) Bolt 1 (4) Screw4*6 4 (5) Mounting Collar 2 (6) Release Key 2 (7) Screw 5*20 1 Note: Product image may vary from the actual delivery....

Page 5 - Push the unit into the Half Sleeve until you hear a click sound

5 INSTALLATION / UN-INSTALLATION Note Before starting installation of the unit, make sure the wiring is connected properly. Use only the parts provided with the unit to ensure proper installation. The use of unauthorized parts may cause malfunction. Install the unit where it does not get in the driv...

Page 6 - car

6 WIRING CONNECTIONS NOTE: Never connect cable to the system while it is connected to the battery power. Whenever the unit is disconnected from the battery, the preset memory will be erased and the unit will go back to its factory defaults. Note: To watch video the parking wire should be connected t...

Page 8 - Press to decrease volume level.

8 Front pane Inner panel 1. IR Sensor IR Remote control signal receiving window. Max distance is 6-8 meters, 45 angels. 2 VOL- button Press to decrease volume level.

Page 9 - Band buttons; → FM2 → FM3 →; Release Button

9 3 VOL+ button Press to increase volume level. 4. POWER/MUTE Button Press it to turn on the unit, press it again to turn the unit off. Short press it to MUTE the volume output, press it again to resume volume when the power is on. 5. MODE Button Press it to select the mode: Radio, DISC (if there is...

Page 10 - REMOTE CONTROL; Power on or off

10 REMOTE CONTROL 1. MODE button Press it to select the mode: Radio, DISC (if there is a disc in unit), USB (if there is a USB device in the unit), CARD (if there is a SD/MMC card in the unit), TV (For PD-710T) and AV IN. 2. POWER Power on or off 3. BAND/ RDM button In Radio mode, press it to change...

Page 11 - SUBTITLE button

11 9. / seek- buttons In DVD mode, Press button to skip to the previous track. Press and hold button for two seconds to activate fast reverse (REW) search in a track. In RADIO mode, press button to start searching automatic, press and hold for two seconds to start manual searching. button Frequency ...

Page 12 - REMOVE BATTERY

12 26. AUDIO/GOTO button In DVD mode press it to select the audio language. In VCD mode, press it to select the sound track in the sequence of MONO L =>MONO R =>STEREO. Go to: in DVD mode ， press and hold for 2 seconds to show TIME SEARCH menu, select number and confirm to go to certain positi...

Page 13 - MAIN MENU; RADIO PLAYER; To start Radio, tap RADIO button on main menu screen.

13 MAIN MENU The best way to discover the program is to explore each screen in detail, and to find out how to move from one to another. Read this chapter for a guided tour. Unit starts by displaying the Main menu. This is the root of the screen hierarchy, and you can simply access all features by ta...

Page 14 - DVD PLAYER; To start DVD Player, tap on DVD button from main menu screen.; TOUCH SCREEN MENU; NOTE; Warning displays if the vehicle is moving for driver's safety.; File Management; STOP button: press it to stop playback.

14 ◆ DVD PLAYER To start DVD Player, tap on DVD button from main menu screen. TOUCH SCREEN MENU You will not see any buttons while DVD is played. Buttons will appear when you tap on TFT screen. Tap the screen again to hide the buttons. Insert DVD disc insert VCD disc NOTE 1. DVD Player will automati...

Page 15 - TV Mode; To sta

15 In DVD mode touch it to enter TITLE MENU (Enable only if the DVD disc with title menu). / Touch it to select previous or next track. ◆ File DISC/USB/SD/MMC interface When a file disc, USB or a memory card is played, the screen will show following interface: Mute the sound. Stop button. Press it t...

Page 16 - SETTING CONTROL; SOUND CONTROL

16 ◆ AV-IN Mode To start AV-IN Mode, tap on AV-IN button from main menu screen. Connect the external audio/video signal source to this unit. Select AV-IN mode in the main menu or by pressing repeat Mode button on the front panel. Note: If there is no external video input, the TFT displays “NO SIGNAL...

Page 18 - WARNING; Code; Kid safe

18 [1]. Subtitle Lang setting: With this option you can select the preferred language for the subtitles. When the selected language is recorded on the disc then this language will automatically be shown. If not, the first language recorded on the disc is displayed. [2]. Audio Lang setting: With this...

Page 19 - Other functions; Subwoofer; Back View Camera

19 [7] NTSC/ PAL: Select this menu item to set up your preferred video output format. PAL is commonly used in Europe, NTSC is commonly used in the USA and Japan. Auto is commonly used. [8] DEFAULT: Factory reset. Set all values to Factory default values including memory and preset stations. SYSTEM I...

Page 21 - Audio; ENTER on remote or tap the screen button to select.

21 Select this menu item is to set TV system: SECAM => NTSC =>PAL ， press NTER button on the remote or tap the screen to select.  Audio Select this menu item is to set the TV sound system: When system setting PAL, press ENTER on remote or tap the screen button to select TV sound system: D/K=&...

Page 23 - Fuse is blown; CD; Clean the compact disc without scratches

23 TROUBLESHOOTING Symptom Cause Remedy G en er a l Power does not turn on. (No sound is produced.) Fuse is blown Replace with fuse of the same amperage. If the fuse blows again, consult your store of purchase In correct wiring Consult your local retailer. No sound output when operating the unit wit...

Page 25 - TECHNICAL SPECIFICATIONS; General; Audio specification

25 TECHNICAL SPECIFICATIONS General Power supply: 11~16V DC Current consumption: max. 15 A Maximum power output: 52W x 4 channels (max) Compatible formats: DVD/SVCD/VCD/HDCD/MP3/MP4/VIDEO/CDDA/Picture CDCD-R/-RW/DVD±R/±RW playback Dimensions (W x D x H) / weight: 165*178*50 mm/2 kg Working temperatu...

Power Acoustik PD-710 - Manual

Table of Contents:

Summary

Other Power Acoustik Models