Page 2 - SAFETY RULES; Safe Operation Practices for Ride-On Mowers; WARNING
2 SAFETY RULES Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. I. GENERAL OPERATION • Read, understand, and follow all...
Page 4 - TABLE OF CONTENTS; CUSTOMER RESPONSIBILITIES
4 TABLE OF CONTENTS SAFETY RULES ......................................................... 2-3 PRODUCT SPECIFICATIONS ....................................... 4 CUSTOMER RESPONSIBILITIES ................................. 4 ASSEMBLY ................................................................. 5-6...
Page 5 - UNASSEMBLED PARTS; Keys; ASSEMBLY; TO REMOVE TRACTOR FROM CARTON; UNPACK CARTON; BEFORE REMOVING TRACTOR FROM
5 UNASSEMBLED PARTS Keys (2) Keys Slope Sheet ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. TO REMOVE TRACTOR FROM CARTON UNPACK CARTON • Remove all accessible loose parts and parts cartons from carton . • Cut along ...
Page 6 - CHECKLIST
6 NOTE: You may now roll your tractor off the skid. Follow the instructions below to remove the tractor from the skid. WARNING: Before start ing, read, un der stand and fol low all in struc tions in the Op er a tion section of this man u al. Be sure tractor is in a well-ventilated area. Be sure the ...
Page 7 - OPERATION
7 OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their mean- ing. DANGER, KEEP HANDS AND FEET AWAY FREE WHEEL (Automatic Models only) OVER TEMP LIGHT KEEP AREA CLEAR SLOPE HAZARDS 15 15 (SEE SAFETY RULES SECTION) BATTERY REVERSE FO...
Page 8 - KNOW YOUR TRACTOR
8 OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. ATTACHMENT CLUTCH LEVER - Used to...
Page 9 - HOW TO USE YOUR TRAC TOR; TO MOVE FORWARD AND BACKWARD
9 OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per form ing any adjustments or repairs. We rec om mend a wide vision safety mask over spec-...
Page 10 - TO ADJUST MOWER CUT TING HEIGHT
10 OPERATION REVERSE OPERATION SYSTEM (ROS) (See Fig. 10) Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" p...
Page 11 - TO STOP MOWER BLADES; BEFORE STARTING THE ENGINE
11 OPERATION TO OPERATE ON HILLS WARNING: Do not drive up or down hills with slopes great er than 15° and do not drive across any slope. • Choose the slowest speed before starting up or down hills. • Avoid stopping or changing speed on hills.• If stopping is absolutely necessary, push clutch/brake p...
Page 12 - MOWING TIPS
12 MOWING TIPS • Mower should be properly leveled for best mowing per for mance. See "TO LEVEL MOWER HOUSING" in the Service and Adjustments section of this manual. • The left hand side of mower should be used for trim- ming. • Drive so that clippings are discharged onto the area that has be...
Page 13 - MAINTENANCE; GENERAL RECOMMENDATIONS; BEFORE EACH USE
13 MAINTENANCE d SPINDLE ZERK d FRONT WHEEL BEARING ZERK c SAE 30 OR 10W30 MOTOR OIL d GENERAL PURPOSE GREASE e REFER TO MAINTENANCE “ENGINE” SECTION d SPINDLE ZERK d FRONT WHEEL BEARING ZERK e ENGINE c GEARSHIFT PIVOTS T RAC T 0 R 1 - Change more often when operating under a heavy load or in high a...
Page 14 - BATTERY; TRACTOR
14 MAINTENANCE BATTERY Your tractor has a battery charging system which is suf fi cient for normal use. However, periodic charging of the battery with an automotive charger will extend its life.• Keep battery and terminals clean.• Keep battery bolts tight.• Keep small vent holes open.• Recharge at 6...
Page 15 - ENGINE; LUBRICATION; TRANSAXLE MAINTENANCE
15 MAINTENANCE V-BELTS Check V-belts for deterioration and wear after 100 hours and replace if necessary. The belts are not adjustable. Re place belts if they begin to slip from wear. ENGINE LUBRICATION Only use high quality detergent oil rated with API service classification SG-SL. Select the oil’s...
Page 16 - CLEANING
AIR FILTER Your engine will not run properly using a dirty air filter. Service air cleaner more often under dusty conditions. See Engine Manual. ENGINE OIL FILTER Replace the engine oil filter every season or every other oil change if the tractor is used more than 100 hours in one year. MUFFLER Insp...
Page 17 - SERVICE AND ADJUSTMENTS
SERVICE AND ADJUSTMENTS WARNING: TO AVOID SE RI OUS IN JU RY, BEFORE PERFORMING ANY SERVICE OR ADJUST- MENTS: • Depress clutch/brake pedal fully and set parking brake. • Place gearshift lever in neutral (N) position. • Place attachment clutch in “DISENGAGED” position. • Turn ignition key to “STOP” a...
Page 19 - TO LEVEL MOWER
19 SERVICE AND ADJUSTMENTS • If adjustment is necessary, see step in Visual Adjust- ment instructions above. • Recheck measurements, adjust if necessary until both sides are equal. FRONT-TO-BACK ADJUSTMENT (See Figs. 27 & 28) IMPORTANT: Deck must be level side-to-side. To obtain the best cutting...
Page 20 - TO REPLACE MOTION BELT DRIVE; TRANSAXLE GEAR SHIFT LEVER NEU TRAL-
20 SERVICE AND ADJUSTMENTS TO REPLACE MOTION BELT DRIVE (See Fig. 30) Park the tractor on level surface. En gage parking brake. For as sis tance, there is a belt installation guide decal on bottom side of left footrest.BELT REMOVAL - • Remove mower (See “TO RE MOVE MOWER” in this section of manual)....
Page 21 - TO REMOVE WHEEL FOR REPAIRS
21 ADJUSTMENT BOLT NEUTRAL LOCK GATE GEARSHIFT LEVER FIG. 31 SERVICE AND ADJUSTMENTS FRONT WHEEL TOE-IN/CAMBER The front wheel toe-in and camber are not adjustable on your tractor. If damage has occurred to affect the front wheel toe-in or camber, contact your nearest authorized service center/depar...
Page 23 - STORAGE; FUEL SYSTEM; ENGINE OIL; OTHER
23 STORAGE Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. WARNING: Never store the trac tor with gas o line in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before stori...
Page 24 - TROUBLESHOOTING POINTS
24 TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” properly. 2. See “TO START ENGINE” in Operation section. 3. Engine flooded. 3. Wait several minutes before attempting to start. 4. Bad spark plug. 4. Replace spark plug. 5. Dir...
Page 25 - TROUBLESHOOTING
25 PROBLEM CAUSE CORRECTION Excessive vibration 1. Worn, bent or loose blade. 1. Replace blade. Tighten blade bolt. 2. Bent blade mandrel. 2. Replace blade mandrel. 3. Loose/damaged part(s). 3. Tighten loose part(s). Replace damaged parts. Engine continues to run when oper- ator leaves seat with att...
Page 26 - SS; GG
1 5 DE G REE S M AX . FOLD ALON G DOTTED LINE THI S I S A 1 5 DE G REE S LOPE ONLY RIDE UP AND DO W N HILL, NOT ACRO SS HILL S U GG E S TED G UIDE FOR S I G HTIN G S LOPE S FOR S AFE OPERATION W ARNIN G : To avo i d s er i o us i n ju ry, operate yo u r tra c tor u p and do w n the fa c e of s lope ...
Page 27 - TONDEZ LES PENTES EN MONTANT OU EN
GUIDE SUGGÈRE POUR L'ÉVALUATION DES PENTES AFIN D'AMÉLIORER LA SÉCURITÉ D'UTILISATION TONDEZ LES PENTES EN MONTANT OU EN DESCENDANT MAIS, JAMAIS EN TRAVERS 15 DEGRÉS MAX PLIEZ SUIVANT LES POINTILLÉS CECI EST UNE PENTE A 15 DEGRÉS
Page 28 - GUIDE DE DÉP ANNAGE
25 GUIDE DE DÉP ANNAGE PROBLÈME CAUSE CORRECTION Vibrations excessives de la tondeuse 1. La lame est usée, tordue, ou lâche. 1. Remplacez la lame. Serrez à fond le boulon de lame. 2. Un mandrin de lame est tordu. 2. Remplacez le mandrin de lame. 3. Des pièces sont lâches ou endommagées. 3. Serrez le...
Page 30 - ENTREPOSAGE; MOTEUR
23 ENTREPOSAGE Préparez immédiatement votre tracteur pour l’entreposage à la fin de la saison ou si le tracteur ne sera pas utilisé pendant une période de 30 jours ou plus. AVERTIS SEMENT : N’entreposez jamais le trac teur dans un bâtiment lorsque le réservoir conteint de l'essence dont les vapeurs ...
Page 31 - RÉVISION ET RÉGLAGES
22 RÉVISION ET RÉGLAGES Fig. 34 POUR REMPLACER L ’AMPOULE DES PHARES • Soulevez le capot. • Dégagez de la douille d’ampoule de l’orifice à l’arrière de la calandre. • Réinstallez l’ampoule dans la douille et poussez à fond la douille d’ampoule dans l’orifice à l’arrière de la calandre. • Fermez le c...
Page 34 - POUR AJUSTER LE NIVEAU L
19 RÉVISION ET RÉGLAGES Fig. 27 Fig. 28 Fig. 25 Fig. 26 AJUSTEMENT AVANT/ARRIÈRE (Voir Figs. 27 et 28 ) IMPORTANT : La plateforme doit être au même niveau d’un côté et de l’autre. Pour obtenir de meilleurs résultats, les lames de la tondeuse doivent être ajustées de sorte que la pointe avant est 1/8...
Page 36 - REVISION ET REGLAGES; INST ALLER L
17 REVISION ET REGLAGES AVERTIS SEMENT : POUR ÉVITER DES DOMMAGES SÉRIEUX, A VANT DE F AIRE TOUS LES RÉVISIONS OU RÉGLAGES. • Appuyez sur la pédale de frein/embrayage et engagez le frein de stationnement. • Placez le levier de changement de vitesse en position point mort (N). • Placez l’embrayage d’...
Page 37 - ENTRETIEN; NETTOYAGE
16 NETTOYER LE T AMIS D’AIR Le tamis d’air doit être libre de saleté et de balle de céréale pour éviter d'endommager le moteur à cause du surchauffage. Net toyez- le avec une brosse en fer ou de l’air comprimé pour enlever toutes les saletés, la paille, et les fibres de gomme séchés. FIL TRE À AIR V...
Page 40 - LES RECOMMANDATIONS GÉNÉRALES; AV
13 ENTRETIEN d GRAISSEUR À PRESSION DE L A BROCHE d GRAISSEUR À PRESSION DU P ALIER DE ROUE ANTÉRIEURE d GRAISSEUR À PRESSION DU P ALIER DE ROUE ANTÉRIEURE e MO TEUR d GRAISSEUR À PRESSION DE L A BROCHE c PIVOTS DE CHAN GE MENT DE VITESSE c HUILE DE MOTEUR SAE 30 OU 10W30 d LUBRIFIANT TOUT USAGE e R...
Page 41 - UTILISATION; CONSEILS DE TONTE
12 UTILISATION POUR DÉMARRER LE MOTEUR (Voir la Fig. 3) Si vous démarrez le moteur pour la première fois ou si le moteur est sans essence, il paut plus de temps pour déplacer l’es sen ce du réservoir au moteur . • Asseyez-vous sur le siège, enfoncez la pédale d'em braya ge/ frein et engagez le frein...
Page 44 - POUR ENGAGER LE FREIN DE STA
9 UTILISATION L ’utilisation d’un tracteur présente le risque de projection des particules dans les yeux qui peuvent causer des bles su res sérieuses. Portez toujours des lunettes de sécurité ou une visière pendant que vous utilisez, ou que vous faites des réglages ou des réparations au tracteur . N...
Page 45 - CONNAISSEZ VOTRE TRACTEUR
8 UTILISATION Fig. 3 CONNAISSEZ VOTRE TRACTEUR AV ANT D’UTILISER VOTRE TRACTEUR, LISEZ CE MANUEL ET LES RÈGLES DE SÉCURITÉ Comparez les illustrations ci-dessous à celles de votre tracteur afin de vou familiariser avec l'emplacement des différentes commandes et avec les réglages. Gardez ce manuel pou...
Page 47 - MONTAGE; LISTE DE CONTRÔLE
6 MONTAGE VÉRIFIER LA PRESSION DES PNEUS Les pneus de votre tracteur ont été surgonflés à l’usine pour l’ex pé di tion. La pression de pneu correcte est importante pour les meilleurs résultats de tonte. • Réduisez la pression de pneu à la pression montrée dans la section “Spécifications du Produit” ...
Page 48 - LES OUTILS EXIGÉS POUR LE; POUR SORTIR LE TRACTEUR DU CAR TON
5 (2) Clés Guide-pente PIÈCES P AS AS SEMBLÉ Votre nouveau tracteur a été monté à l’usine sauf les pièces qui ne sont pas montées pour l’expédition. LES OUTILS EXIGÉS POUR LE MON TA GE DE VOTRE TRACTEUR Un jeu de clé à douille rendra le montage. Les di men sions nor- males des clés sont inscrites. (...
Page 49 - SOMMAIRE; SPÉCIFICATIONS DE PRODUIT; RESPONSABILITÉS DU CLIENT
4 RÈGLES DE SÉCURITÉ ............................................. 2-3 SPÉCIFICATIONS DE PRODUIT ................................4 RESPONSABILITÉS DU CLIENT ................................. 4 MONTAGE .................................................................. 6-7 UTILISATION ...................
Page 50 - RÈGLES DE SÉCURITÉ; Conseils pour l’utilisation en toute sécurité des tracteurs
3 RÈGLES DE SÉCURITÉ Conseils pour l’utilisation en toute sécurité des tracteurs III. ENFANTS Des accidents tragiques peuvent avoir lieu si l’opérateur ne fait pas très attention en présence d’enfants. Les enfants sont sou- vent très attirés par la machine et par la tonte. Ne croyez jamais que les e...
Page 52 - Portez toujours des lunettes de sécurité lors de l’utilisation.; MANUEL IMPORTANT
MANUEL DU PROPRIÉTAIRE MODÈLE: PB19546L T TRACTEUR DE PELOUSE Portez toujours des lunettes de sécurité lors de l’utilisation. Visitez notre site web: www .poulan-pro.com AVERTIS SEMENT : Lisez soigneusement le man uel suivez tous les aver tis se ments et les in struc tions de sécurité. Les bles- sur...