Poulan PRO 545058737 - Manual

Page 2 - SAFETY RULES; OPERATOR SAFETY

2 SAFETY RULES WARNING: When using gardening appliances, basic safety precautions must al- ways be followed to reduce the risk of fire and serious injury. DANGER: This power tool can be dan- gerous! This unit can cause serious injury in- cluding amputation or blindness to the operator and others. Th...

Page 4 - ASSEMBLY; CARTON CONTENTS

4 screen. If you operate in a locale where such regulations exist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law. For normal homeowner use, the muffler and spark arresting screen will not require any ser- vice. After 50...

Page 5 - CONFIGURING YOUR UNIT

5 Screw Mounting Bracket Handlebar Bracket Cover ASSEMBLY OF SHOULDER STRAP WARNING: Proper shoulder strap and handlebar adjustments must be made with the engine completely stopped before using unit. 1. Insert your right arm and head through the shoulder strap and allow it to rest on your left shoul...

Page 8 - OPERATION; HELPFUL TIP

8 OPERATION KNOW YOUR UNIT READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. Line Limiter Blade Primer Bulb Handl...

Page 10 - OPERATING INSTRUCTIONS; OPERATING POSITION

10 Coupler Primary Hole Upper Shaft Locking/ Release Button Attachment Guide Recess WARNING: Make sure the locking/ release button is locked in the primary hole and the knob is securely tightened before op- erating the unit. All attachments are designed to be used in the primary hole unless otherwis...

Page 12 - ADDITIONAL SAFETY RULES; FOR OPTIONAL ATTACHMENTS; EDGER SAFETY

12 S Do not swing unit with such force that you are in danger of losing your balance. Bring the engine to cutting speed before enter- ing the material to be cut.If the blade does not turn when you squeeze the throttle trigger, make sure shaft is fully inserted into the engine.Always release the thro...

Page 14 - SNOW THROWER SAFETY; MAINTENANCE; CHECK FOR LOOSE

14 S Always stop the unit when work is delayed or when walking from one cutting location to another. S If you strike or become entangled with a foreign object, stop the engine immediately and check for damage. Have any damage repaired by an authorized service dealer before attempting further operati...

Page 15 - SERVICE AND ADJUSTMENTS

15 INSPECT AND CLEAN UNIT AND DE- CALS S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild deter- gent. S Wipe off unit with a clean dry cloth. CLEAN AIR FILTER A dirty air filter decreases engine perform- ance and increases fu...

Page 16 - Idle Speed Adjustment; STORAGE; SEASONAL STORAGE; ENGINE

16 The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions: S Engine will not idle when the throttle is released. S The trimmer head, blade or optional attachment moves/spins at idle. Make adjustments with the unit supported so...

Poulan PRO 545058737 - Manual

Table of Contents:

Summary

Other Poulan PRO Models