Poulan PRO 530165213 - Manual

Page 2 - SAFETY RULES; KNOW YOUR UNIT

-- 2 -- SAFETY RULES WARNING: Failure to follow all Safety Rules and Precautions can result in serious injury. KNOW YOUR UNIT S Read your instruction manual carefully until you completely understand and can follow all warnings and safety rules before operat- ing the unit. D Restrict unit to users wh...

Page 3 - MAINTAIN YOUR UNIT PROPERLY; ASSEMBLY; BLOWER TUBE ASSEMBLY

-- 3 -- plug disconnected. Keep vents and dis- charge tubes free of debris which can ac- cumulate and restrict proper air flow. D Never place any object in the air intake opening as this could restrict proper air flow and cause damage to the unit. D Never use for spreading chemicals, fertil- izers, ...

Page 4 - VACUUM TUBE ASSEMBLY; HOW TO CONVERT UNIT FROM

-- 4 -- NOTE: Make sure edge of the small opening is flush against the flared area of the elbow tube, and the rib on the elbow tube is on the bottom. 3. Close the zipper on the bag. Make sure the zipper is closed completely. 4. Remove blower tube from engine. Rib Groove 5. Insert the elbow tube into...

Page 5 - SHOULDER STRAP ADJUSTMENT; OPERATION; KNOW YOUR BLOWER

-- 5 -- SHOULDER STRAP ADJUSTMENT 1. Hold the unit as shown with the muffler side facing away from your body and clothes. 2. Pass the shoulder strap over your head and onto your right shoulder. 3. Extend your left arm toward the rear of the vacuum bag. 4. Adjust shoulder strap until the vacuum bag/s...

Page 6 - HELPFUL TIP

-- 6 -- OPERATING POSITION Blower Eye Protection Vacuum OPERATING TIPS S While vacuuming or blowing debris, hold the unit with the muffler side facing away from your body and clothes (see OPERAT- ING POSITION illustration above). S To reduce the risk of hearing loss associated with sound level(s), h...

Page 7 - STARTING A COLD ENGINE

-- 7 -- D Hold the unit in the starting position as shown. Make sure the blower end is di- rected away from people, animals, glass, and solid objects. Blower Vacuum STARTING POSITION WARNING: When starting engine, hold the unit as illustrated. Do not set unit on any surface except a clean, hard area...

Page 8 - MAINTENANCE

-- 8 -- MAINTENANCE WARNING: Avoid touching muffler unless engine and muffler are cold. A hot muffler can cause serious burns. WARNING: Stop engine and be sure the impeller blades have stopped turning be- fore opening the vacuum inlet door or at- tempting to insert or remove the vacuum or blower tub...

Page 9 - STORAGE

-- 9 -- Fuel Line Fuel Filter CHECK MUFFLER MOUNTING SCREWS Once each year, ensure muffler mounting screws are secure and tightened properly to prevent damage. Mounting Screw Holes Muffler Cover Screws 1. Loosen and remove the 2 screws from the muffler cover. 2. Remove the muffler cover. 3. Tighten ...

Page 10 - ENGINE

-- 10 -- HELPFUL TIP During storage of your gas/ oil mixture, the oil will sepa- rate from the gas. We recommend that you shake the gas can weekly to insure proper blending of the gas and oil. ENGINE S Remove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark p...

Poulan PRO 530165213 - Manual

Table of Contents:

Summary

Other Poulan PRO Models