Poulan PRO 530164694 - Manual
Poulan PRO 530164694 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – SAVE THESE INSTRUCTIONS; ASSEMBLY; CARTON CONTENTS
- Page 5 – HANDLEBAR CLAMP BASE; SHOULDER STRAP ASSEMBLY
- Page 6 – CONFIGURING YOUR UNIT
- Page 7 – PIVOT; ATTACHING THE METAL SHIELD
- Page 8 – OPERATION
- Page 11 – MAINTENANCE; BLADE MAINTENANCE; SERVICE AND ADJUSTMENTS; REPLACING THE LINE
- Page 12 – STORAGE; SEASONAL STORAGE; LIMITED WARRANTY
ENGLISH
ESP
AÑOL
FRANÇAIS
DANGER:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
PELIGRO:
Lea el manual de instrucciones y siga todas las advertencias e
instrucciones de seguridad. El no hacerlo puede resultar en le-
siones graves.
DANGER:
Lire le manuel d’instructions et bien respecter tous les avertisse-
ments et toutes les instructions de sécurité. Tout défaut de le
faire pourrait entraîner des blessures graves.
Instruction Manual
Manual de Instrucciones
Manuel d’Instructions
PPB4000C
Electrolux Home Products, Inc.
250 Bobby Jones Expressway
Augusta, GA 30907
Copyright
E
2003 Electrolux Home Products, Inc.
530164694
12/8/03
NOT DESIGNED FOR USE WITH
ELECTRIC POWERHEADS
NO ESTA DISEÑADO PARA EL USO CON
CABEZAS DE MOTOR ELÉCTRICO
NON CONÇU POUR L’USAGE AVEC
BLOC --- MOTEURS ÉLECTRIQUES
R
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
4 from water heaters, electric motors orswitches, furnaces, etc. S Store unit so the blade cannot accidentallycause injury. S Store unit indoors, out of reach of children. If situations occur which are not covered in thismanual, use care and good judgment. If youneed assistance, call 1--800--554--67...
5 Spacer Tabs HANDLEBAR CLAMP BASE Spacer Tabspositioned for useon 1 " diameter upper shaft 1. Place the shaft clamp over the uppershaft above the arrow on the safety decal. 2. Position the clamp base under the uppershaft and align the shaft clamp and clampbase screw holes (use spacer tabs be-tw...
6 8. Try on shoulder strap and adjust for fitand balance before starting the engine orbeginning a cutting operation. NOTE: It may be necessary to relocate the shoulder strap clamp on the shaft for properbalancing of unit. 30 inches(76 cm) HARNESS ADJUSTMENT FOR BALANCE 6 inches(15 cm)belowwaist 4 --...
