Poulan PRO 2750 - Manual
Poulan PRO 2750 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAFETY RULES; PLAN AHEAD; HANDLE FUEL WITH CAUTION
- Page 3 – KICKBACK
- Page 4 – ANSI
- Page 5 – ASSEMBLY
- Page 6 – FUELING & LUBRICATION; FUELING ENGINE; BAR AND CHAIN LUBRICATION
- Page 7 – STARTING; IGNITION SWITCH; START; ON; CUTTING METHODS
- Page 8 – TREE FELLING TECHNIQUES; Plan a clear retreat path
- Page 9 – IMPORTANT POINTS; Overcutting; BUCKING WITHOUT A SUPPORT
- Page 10 – PRUNING
- Page 11 – Pruning technique; SERVICE; TASK
- Page 12 – Always stop unit and disconnect spark plug before performing; TROUBLESHOOTING CHART; LIMITED WARRANTY
- Page 13 – ELECTROLUX; EMISSION CONTROL; OWNER’S WARRANTY RESPONSIBI-
Models: 2750
2775
2900
3050
ENG
LIS
H
R
ES
PA
ÑOL
530087840
4/26/00
Please do not return unit to retailer.
Por favor, no devuelva el aparato al lugar de compra.
1 -- 800 -- 554 -- 6723
www.poulan .com
Operator’s Manual
Manual del Operador
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA :
Lea el manual del operador y siga todas las advertencias e
instrucciones de seguridad. El no hacerlo puede resultar
en lesiones graves.
Electrolux Home Products
North America
Div. of WCI Outdoor Products, Inc.
Augusta, GA 30907
Copyright
E
2000 WCI Outdoor Products, Inc.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 SAFETY RULES WARNING: Always disconnect spark plug wire and place wire where it can-not contact spark plug to prevent accidentalstarting when setting up, transporting, ad-justing or making repairs except carburetoradjustments.Because a chain saw is a high-speed wood-cutting tool, special safety pr...
3 S Mix and pour fuel in an outdoor area onbare ground; store fuel in a cool, dry, wellventilated place; and use an approved,marked container for all fuel purposes.Wipe up all fuel spills before starting saw. S Move at least 10 feet (3 meters) from fuel-ing site before starting engine. S Turn the en...
4 MAINTAIN CONTROL Never reverse hand positions Stand to the left of the saw Thumb on under side of handlebar Elbow locked S Keep a good, firm grip on the saw withboth hands when the engine is runningand don’t let go. A firm grip will help youreduce kickback and maintain control ofthe saw. Keep the ...