Porter-Cable PTS10 - Manual
Porter-Cable PTS10 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 5 – are available at the store the unit was purchased.
- Page 6 – Tips; ASSEMBLY
- Page 7 – MAINTENANCE; To Install Abrasive Disc; Clean dust from sander pad.
- Page 8 – Lubrication; weight oil if air tool oil is not available.; ACCESSORIES; for a catalog or for the name of your nearest supplier.
- Page 9 – NOTES
- Page 10 – LIMITED WARRANTY
IMPORTANT
Please make certain that the person who is
to use this equipment carefully reads and
understands these instructions before
starting operations.
Part No. D29847-037-0
Random Orbital Palm Sanders
IMPORTANT
Veuillez vous assurer que la personne qui
utilise cet outil lit attentivement et comprend
ces instructions avant de commencer à utiliser
l'outil.
IMPORTANTE
Asegúrese de que la persona que va a usar esta
herramienta lea cuidadosamente y comprenda
estas instrucciones antes de empezar a
operarla.
ESPAÑOL: PÁGINA 11
FRANÇAIS: PAGE 19
Copyright © 2003 Porter-Cable Corporation
Instruction manual
Manual de
Instrucciones
Guide d'utilisation
MODEL/
MODELO/
MODÈLE
PTS3
PTS4
PTS5
PTS6
PTS7
PTS8
PTS9
PTS10
To learn more about Porter-Cable visit
our website at:
http://www.porter-cable.com
Pour de plus amples renseignements
concernant Porter-Cable, consultez
notre site Web à l'adresse suivante:
http://www.porter-cable.com
Para obtener más información sobre
Porter-Cable, visite nuestro sitio web en:
http://www.porter-cable.com
Lijadora Orbital para la Palma
de la Mano
Ponceuse orbitale aléatoire
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PTA36 5" *PSA No 100 g 5/16-24 Male PTS3, PTS5 PTA37 5" *PSA 5 hole 100 g 5/16-24 Male PTS4, PTS6 PTA38 5" Hook No 100 g 5/16-24 Male PTS3 & Loop PTS5 PTA39 5" Hook 5 hole 100 g 5/16-24 Male PTS4, & Loop PTS6 PTA40 6" *PSA No 130 g 5/16-24 Male PTS7, PTS9 PTA41 6" *PS...
Before each use: ● Drain water from air compressor tank and condensation from air lines. See air compressor’soperators manual. Disconnect the tool from the air supply before lubricating or changingabrasive disc. ● Lubricate tool, see “Maintenance” section in this manual. ● Place abrasive disc onto s...
7- ENG D29847 MAINTENANCE To Install Abrasive Disc ● Disconnect the tool from the air supply holding it so sander pad faces up. ● Clean dust from sander pad. ● Position abrasive disc onto sander pad. ● Press abrasive disc firmly onto sander pad. Align the dust extraction holes (if equipped) in the a...
