Porter-Cable D22722-028-3 - Manual
Porter-Cable D22722-028-3 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAFETY GUIDELINES - DEFINITIONS; IMPORTANT SAFETY INSTRUCTIONS
- Page 5 – Trigger; Assemble Stabilizer Handle
- Page 6 – MAINTENANCE; Turn air compressor on and allow air tank to fill.; PSI; Place the tool in reverse or forward position.; Tips; Forward; Lubrication; To lubricate the air motor manually:
- Page 7 – REPAIR PARTS; Description
- Page 8 – LIMITED WARRANTY
IMPORTANT
Please make certain that the person who is
to use this equipment carefully reads and
understands these instructions before
starting operations.
Part No. D22722-028-3
1/2" Reversible Drill
Taladro Reversible
de 1/2"
IMPORTANT
Veuillez vous assurer que la personne qui
utilise cet outil lit attentivement et comprend
ces instructions avant de commencer à utiliser
l'outil.
Perceuse réversible de
1/2 po
IMPORTANTE
Asegúrese de que la persona que va a usar esta
herramienta lea cuidadosamente y comprenda
estas instrucciones antes de empezar a
operarla.
ESPAÑOL: PÁGINA 9
FRANÇAIS: PAGE 17
Copyright © 2002 Porter-Cable Corporation
Instruction manual
Manual de
Instrucciones
Manuel d'instructions
MODEL PTD501
MODÈLE PTD501
MODELO PTD501
To learn more about Porter-Cable visit
our website at:
http://www.porter-cable.com
Pour de plus amples renseignements
concernant Porter-Cable, consultez
notre site Web à l'adresse suivante:
http://www.porter-cable.com
Para obtener más información sobre
Porter-Cable, visite nuestro sitio web en:
http://www.porter-cable.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2- ENG D22722 • Air powered equipment and power tools are capable of propelling materials such as fasteners, metal chips, sawdust, and other debris at high speed, which could resultin serious eye injury. • Tool attachments can become loose or break and fly apart propelling particles at the operator ...
5- ENG D22722 ASSEMBLY SPECIFICATIONS OPERATION Accessories Required IMPORTANT: Line pressure or hose inside diameter should be increased to compensate for unusually long air hoses (over 25 feet). Minimum hose diameter should be 3/8” I.D.and fittings should have 1/4” NPT thread. Free Speed 600 RPM M...
6- ENG D22722 MAINTENANCE To use: ● Turn air compressor on and allow air tank to fill. ● Set the air compressor’s regulator to 90 PSI. This tool operates at a maximum 90 PSI pressure. ● This tool has a stabilizer handle (C). Loosen stabilizerhandle and rotate to desired position and tighten. ● Place...
