Porter-Cable 8723 - Manual

Porter-Cable 8723

Porter-Cable 8723 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
Page: / 19

Table of Contents:

  • Page 2 – WORK AREA
  • Page 7 – Dispose of expended batteries properly.; The; FUNCTIONAL DESCRIPTION; FOREWORD; A low volume, high pitched tone is normal while the switch is in the; ELECTRIC BRAKE
  • Page 8 – INSTALLING AND REMOVING DRILL AND SCREWDRIVER BITS; The three-jaw chuck is designed; ADJUSTING TORQUE COLLAR
  • Page 9 – DRIVER BIT STORAGE; A B; SIDE HANDLE
  • Page 10 – OPERATION; CHARGING THE BATTERY PACK GENERAL; Disconnect charger from power source when not in use.; DIAGNOSTICS
  • Page 11 – pack has failed (pack is not chargeable and requires replacement).; INSTALLING OR REMOVING BATTERY PACK; IT’S
  • Page 12 – IT’S A
  • Page 13 – Use only good quality sharp high speed steel twist bits.; DRIVING WOOD SCREWS; SUGGESTED HOLE SIZES
  • Page 14 – Drilling Concrete
  • Page 15 – MAINTENANCE; Remove battery pack to prevent accidental starting.
  • Page 16 – ALTERNATE CHUCK REPLACEMENT; Remove battery pack to prevent accidental start-up.; REMOVE
  • Page 17 – ACCESSORIES; Delta Factory Service Centers, and Porter-; Since accessories other than those offered by
  • Page 18 – ONE YEAR WARRANTY
Loading the manual

ESPAÑOL: PÁGINA 19
FRANÇAISE : PAGE 39

Instruction

manual

The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.

Model No. ______________________________________

Type ___________________________________________

Serial No. _______________________________________

IMPORTANT

Please make certain that the person who is to
use this equipment carefully reads and
understands these instructions before starting
operations

.

905385 - 11-11-02

To learn more about Porter-Cable

visit our website at:

http://www.porter-cable.com

Copyright © 2002 Porter-Cable Corporation

PATENT PENDING

Two-Speed Cordless
Drill/Drivers And
Hammer Drill Driver

Model 966 - 1/2" 12.0V Drill/Driver

Model 8623 12V Battery Pack

Model 978 - 1/2" 14.4V Drill/Driver

Model 8723 14.4V Battery Pack

Model 977 - 1/2" 14.4V

Hammer Drill/Driver

Model 8723 14.4V Battery Pack

Model 8604

12.0/14.4V Charger

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - WORK AREA

2 SOME DUST CREATED BY POWER SANDING, SAWING, GRINDING, DRILLING, AND OTHER CONSTRUCTION ACTIVITIES contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:• lead from lead-based paints,• crystalline silica from bricks and cement and o...

Page 7 - Dispose of expended batteries properly.; The; FUNCTIONAL DESCRIPTION; FOREWORD; A low volume, high pitched tone is normal while the switch is in the; ELECTRIC BRAKE

7 19. Dispose of expended batteries properly. The Porter-Cable Model 8823 Battery Pack containsrechargeable, nickel-cadmium batteries. Thesebatteries must be recycled or disposed of properly.Drop off expended battery packs at your localreplacement battery retailer, your local recycling center,or at ...

Page 8 - INSTALLING AND REMOVING DRILL AND SCREWDRIVER BITS; The three-jaw chuck is designed; ADJUSTING TORQUE COLLAR

8 INSTALLING AND REMOVING DRILL AND SCREWDRIVER BITS Always set the reversing button to the center (locked "OFF")position when installing and removing bits. 1. The three-jaw chuck is designed for self-centering of the bit. Openjaws large enough by turning thesleeve (A) Fig. 2 counterclockwis...

Other Porter-Cable Models