Porter-Cable 7801 - Manual

Porter-Cable 7801

Porter-Cable 7801 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
Page: / 15

Table of Contents:

  • Page 2 – GENERAL SAFETY RULES; WORK AREA
  • Page 4 – ADDITIONAL SAFETY RULES FOR DRYWALL SANDER; SYMBOL
  • Page 5 – REPLACEMENT PARTS; When servicing use only identical replacement parts.; MOTOR; Do not operate your tool on a current on which the; EXTENSION CORD SELECTION
  • Page 6 – ADDITIONAL SAFETY RULES FOR PAINT REMOVAL; LEAD-BASED PAINT SHOULD ONLY BE REMOVED BY A PROFESSIONAL.
  • Page 7 – OPERATING INSTRUCTIONS; FUNCTIONAL DESCRIPTION; is minimized by the use of an external; ABRASIVE DISC SELECTION; The following items are furnished with the
  • Page 8 – INSTALLATION; Connect the vacuum hose to the Drywall Sander. Open the Drywall
  • Page 10 – CAUTION: Wear a respirator approved by NIOSH for “Dust and Mist”.; Turn Drywall Sander switch “ON”.
  • Page 11 – Do not allow rotating abrasive pad to contact sharp; ABRASIVE PAD REPLACEMENT; DISCONNECT TOOL FROM POWER SOURCE.; DO NOT USE THE SANDER WITHOUT A PROPER ABRASIVE PAD
  • Page 12 – TRANSPORTATION AND STORAGE; MAINTENANCE; KEEP TOOL CLEAN; Wear safety glasses while using compressed air.; FAILURE TO START
  • Page 13 – ACCESSORIES; Delta; Since accessories other than those offered by
  • Page 14 – ONE YEAR WARRANTY
Loading the manual

Part No. 904374 - 06-26-02

MODEL 7800
MODEL 7801

ESPAÑOL: PÁGINA 15
FRANÇAISE : PAGE 29

Drywall Sander

Instruction

manual

The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.

Model No. ______________________________________

Type ___________________________________________

Serial No. _______________________________________

IMPORTANT

Please make certain that the person who is
to use this equipment carefully reads and
understands these instructions before
starting operations.

To learn more about Porter-Cable

visit our website at:

http://www.porter-cable.com

Copyright © 2002 Porter-Cable Corporation

Patent Pending

904374- 06-26-02.qxd 7/11/02 8:12 AM Page 1

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - GENERAL SAFETY RULES; WORK AREA

2 WARNING: SOME DUST CREATED BY POWER SANDING, SAWING,GRINDING, DRILLING, AND OTHER CONSTRUCTION ACTIVITIES contains chemicals known to cause cancer, birth defects or otherreproductive harm. Some examples of these chemicals are:· lead from lead-based paints,· crystalline silica from bricks and cemen...

Page 4 - ADDITIONAL SAFETY RULES FOR DRYWALL SANDER; SYMBOL

4 ADDITIONAL SAFETY RULES FOR DRYWALL SANDER 1. USE A RESPIRATOR approved by NIOSH for “Dust and Mist”. Ventilate work area and/or use a dust collector. Continued and prolongedexposure to high concentrations of airborne dust may affect the respiratorysystem function. 2. MAINTAIN FIRM FOOTING AND BAL...

Page 5 - REPLACEMENT PARTS; When servicing use only identical replacement parts.; MOTOR; Do not operate your tool on a current on which the; EXTENSION CORD SELECTION

5 REPLACEMENT PARTS When servicing use only identical replacement parts. MOTOR Many Porter-Cable tools will operate on either D.C., or single phase 25 to 60cycle A.C. current and voltage within plus or minus 5 percent of that shownon the specification plate on the tool. Several models, however, are ...

Other Porter-Cable Models